Pyrofarms Fluorosphere Water Filled Orb Instruction Manual

Pyrofarms Fluorosphere Water Filled Orb Instruction Manual

PYROFARMS LogoFluoroSphere
Instruction Manual

PYROFARMS FluoroSphere Water Filled Orb

WHAT’S INCLUDED

  • 4″ Ultraviolet Blacklight Base
  • 6″ Glass Orb
  • 10ml FluoroGel
  • Silicone Stopper

NOT INCLUDED

3 AAA BatteriesPYROFARMS FluoroSphere Water Filled Orb - stopper

PRECAUTIONS

  • FluoroGel may stain fabric and skin temporarily
  • Be careful when handling FlouroGel

INSTRUCTIONS

  • Place three (3) AA batteries into the UV light base.
  • If FluoroGel has separated, swirl and shake the bottle to thoroughly mix the FluoroGel solution.
    PYROFARMS FluoroSphere Water Filled Orb - stopper 1
  • Remove the silicone stopper from the top of the glass orb.
  • Fill the glass orb with room-temperature tap water.
  • Leave about a half inch of space from the top opening. Use caution to not overfill.
  • Dry outside of the orb and place on the UV light base.
  • Turn the light base on (press the black button on the side).
  • Darken the room for a better effect. Gently mix Fluorogel.
  • Add 10-15 drops FluoroGel to the orb through the top opening.
  • Watch the show slowly develop.
  • Take a picture and share it. #FluoroSphere
  • FluoroSphere can be left on a light base as a room decoration.

CLEANING THE FLUOROSPHERE

  • Remove the silicone stopper from the top of the glass orb.
  • Empty contents into sink.
  • Rinse the glass orb and base with warm water.

WHAT IS THE FLUOROSPHERE?

The FluoroSphere is a water-filled Orb that sits on a UV light base.
As the FluoroGel dissolves into the water, a brilliant fluorescent light show is produced. The FluoroSphere is not living and is based on fluorescence. Fluorescence occurs when a fluorescent compound (FluoroGel) absorbs light of a short wavelength (blue/UV) and releases light of a longer wavelength (yellow-green).
The FluoroSphere comes with a 6-inch glass sphere, a UV light base, and a bottle of FluoroGel. Once the FluoroSphere is filled with water and placed on the UV light base, FluoroGel is slowly added. As the
FluoroGel dissolves into the water a unique light show begins.

TRY THE FOLLOWING OPTIONS TO CHANGE THE
FLUOROSPHERE EFFECTS

  • Gently swirl water before adding the FluoroGel
  • Slightly chill water before adding the FlouroGel
  • Use warm water in the FluoroSphere
  • Use another clear glass container that can safely sit on the light base
  • More FluoroSphere Information

PYROFARMS FluoroSphere Water Filled Orb - QR codehttps://pyrofarms.com/collections/all/products/fluorospherePYROFARMS FluoroSphere Water Filled Orb - light base

OTHER PYROFARMS PRODUCTS

The Bioluminescent Bio-Orb with OctoStand
The Bio-Orb is a hand-blown glass sphere filled with bioluminescent PyroDinos (dinoflagellates). It is all natural! Seawater and Dinos in a glass Orb on a metal Octopus Stand.  The Bio-Orb will produce natural light (bioluminescence) at night when gently swirled. Easier than a houseplant to care for.

PYROFARMS FluoroSphere Water Filled Orb - QR code 1https://pyrofarms.com/collections/all/products/bio-orb-with-octo-stand

PYROFARMS FluoroSphere Water Filled Orb - houseplant

PYROFARMS Logo2075 Corte del Nogal • Suite T • Carlsbad, CA 92011
#fluorosphere • pyrofarms.com
+
SHOW THE GLOW

Created In California

References

Documents / Resouces

Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.


Related Manuals