Ravak Pvs1-80 Bathtub Screen Instruction Manual (+ PDF)

Contents hide

1 RAVAK PVS1-80 Bathtub Screen

2 Product Information: PVS1 – 80 / NVS1 – 80

3 Assembly Procedure

4 Cleaning and Maintenance

5 Product Usage Instructions

6 INSTALLATION INSTRUCTIONS

7 CLEANING AND MAINTENANCE

8 Documents / Resources

8.1 References

9 Related Posts

RAVAK PVS1-80 Bathtub Screen

Product Information: PVS1 – 80 / NVS1 – 80

The PVS1 – 80 / NVS1 – 80 is a product manufactured by RAVAK and made of silicone. It is used for assembling and mounting purposes.

Assembly Procedure

Follow the steps below to assemble the product:

Step 1
Step 2
Step 16
Repeat step 3x
Repeat step 3x
Repeat step 2x
1400
800
800
-2-
Step 1
Step 1
23
4
U
3x 5
15
2
3
4
6 6789
7 6789
6789
-3-
U
10
11
SILICONE RAVAK
13
SILRIACVOANKE
11
12
6
14
25
SRIALVICAOKNE
16
15
-4-

Cleaning and Maintenance

To maintain the product, wipe its painted, glass or plastic pieces with a soft cloth. Use the detergents recommended by the manufacturer. Do not use any abrasive pastes, dissolvent, acetone or detergents and disinfectants that contain chlorine. RAVAK recommends using RAVAK AntiCalc Conditioner, which renews and maintains all the qualities of the RAVAK GB AntiCalc coating, and RAVAK Cleaner to remove old and dried-on debris from glass surfaces, shower frames, enamel, and acrylic.

Product Usage Instructions

Assemble the PVS1 – 80 / NVS1 – 80 according to the assembly procedure provided in the user manual.
To maintain the product, wipe its painted, glass or plastic pieces with a soft cloth.
Use detergents recommended by the manufacturer for cleaning.
Do not use abrasive pastes, dissolvent, acetone or detergents and disinfectants that contain chlorine.
RAVAK recommends using RAVAK AntiCalc Conditioner to maintain the qualities of the RAVAK GB AntiCalc coating and RAVAK Cleaner to remove old and dried-on debris from glass surfaces, shower frames, enamel, and acrylic.

INSTALLATION INSTRUCTIONS

TOOLS

ASSEMBLY PROCEDURE

CLEANING AND MAINTENANCE

Attention!
Maintain the product only by wiping its painted, glass or plastic pieces with a soft cloth. Use the detergents recommended by the manufacturer.. Never use any abrasive pastes, dissolvent, acetone or detergents and disinfectants, that contain chlorine. We recommend the products: RAVAK AntiCalc Conditioner a preparation which perfectly renews and maintains all the qualities of the RAVAK AntiCalc coating; RAVAK Cleaner worpcs to remove old and dried-on debris from glass surfaces, shower frames, enamel and acrylic bathtubs, washbasins and water taps; RAVAK Disinfectant is a special preparation with notable anti-bacterial and anti-fungal effects. The manufacturer is not responsible for damage caused by misuse, improper GB installation and repair of the product. The manufacturer has the right to constant innovation and changes of the product.

For further information concerning assembly, installation, and use and maintenance, please contact your local dealer.
For further information, contact your local Rivka dealer.
The manufacturer reserves the right to amend or improve on existing designs or features.
Please help preserve the environment by observing local country guidelines or laws regarding re-cycling.
Materials which are not suitable for re-cycling must be disposed of at an official and suitable waste control centre.

OOO RAVAK ruul. , Moskva 125 130,
tel./fax: ,
e-mail: [email protected]
, www.ravak.com