Synco G1(a2) 2 Person Wireless Microphone User Manual

Synco G1(a2) 2 Person Wireless Microphone User Manual

SYNCO -logo

SYNCO G1(A2) 2 Person Wireless Microphone-

Microphone G1(A2) >>> User Manual

Thank you for choosing SYNCO product. Please read this manual carefully before use and follow all instructions mentioned herein.

Caring For Your SYNCO Product

  • Please keep the product in a dry, clean, dust-free environment.
  • Keep corrosive chemicals, liquids, and heat sources away from the product to
    prevent mechanical damage.
  • Use only a soft and dry cloth for cleaning the product.
  • Malfunction may be caused by dropping, the impact of external force.
  • Do not attempt to disassemble the product. Doing so voids the warranty.
  • Please have the product checked or repaired by authorized technicians if any
    malfunctions happened.
  • Failure to follow all the instructions may result in mechanical damage.
  • Warranty does not apply to human errors.

Package List

SYNCO G1(A2) 2 Person Wireless Microphone-Package List

Product Instruction

SYNCO G1(A2) 2 Person Wireless Microphone-Product Instruction

TX Transmitter

① External Mic Input⑥ Pairing
② USB-C Port⑦ Built-in Mic
③ Power⑧ Pocket Clip
④ Reset(Help with Eject Pin)⑨ Pairing Indicator
⑤ Low Cut⑩ Power Indicator

SYNCO G1(A2) 2 Person Wireless Microphone-Product Instruction2

RX Receiver

① USB-C Port⑥ 3.5mm Audio Output
② Power(Mono/Stereo Switch)⑦ 3.5mm Monitoring Jack
③ Reset(Help with Eject Pin)⑧ Pocket Clip
④ Channel A Gain Control⑨ Pairing Indicator
⑤ Channel B Gain Control⑩ Power Indicator

Indicator

Power Indicator (Green)Pairing Indicator (Blue)
Slow FlashesPower is lower than 10%Power on
Fast Flashes/system pairing
Keeps OnIt stays green when charging and is off after fully chargedsystem paired
Fast flashes twice, is

off and repeats

/The low cut function is on.

Operations

  1. Power Button
    Long press the power button for 2 seconds to turn on/off the system. Short press the power button on the RX for the Mono/Stereo switch.
  2. Pairing
    The system will pair automatically after the power is on. If you need manual
    pairing, long-press the channel A gain control and channel B gain control the RX, and the pairing button on the TX, the system will start to pair
  3. Connection
    The receiver outputs audio signals to recording devices with a 3.5mm TRRS Phone Cable or a 3.5mm TRS Camera Cable. Please use the corresponding cable based on your device.
  4. Installation
    Attach the transmitter or the external mic to the speaker’s clothing. Insthe receiver to the camera’s hot shoe via the pocket clip. (Note: When using the external mic, please insert it into the mic input properly.)
    SYNCO G1(A2) 2 Person Wireless Microphone-Operations
  5. Gain Control
    The initial value of the gain is the microphone’s original volume. Each press of the gain control button increases the gain by one level, the fourth level at most. When the gain is at max level, press once and return to the initial value.
  6. Charging
    Please fully charge the TX and RX via the USB-C port and the charging cable before use.
TX Transmitter
Wireless TransmissionDigital 2.4GHz
RF Frequency Band2400-2483.5MHz
Working Distance164ft/50m (LOS area), 98ft/30m (NLOS area)
Latency12.5ms
MountingPocket Clip
Audio Input1/8″ / 3.5 mm TRS Mic Input
Audio Input Level1V (0dBV)
RF Output Power<10mW
Power Requirements3.3V-4.7V
Battery TypeBuilt-in Lithium Battery
Battery Charging Time1.5H
Battery Life5H
Dimensions52X42X16mm
MaterialPlastic
Weight35g
RX Receiver
Wireless TransmissionDigital 2.4GHz
RF Frequency Band2400-2483.5MHz
Approximate RF Sensitivity-81dBm
Working Distance164ft/50m (LOS area), 98ft/30m (NLOS area)
Latency12.5ms
MountingPocket Clip
Number of Audio Channels2
Audio Output1/8” / 3.5 mm TRS Mic Output
1/8“ / 3.5 mm TRS Headphone Output
Gain0-4 Level (0 to 8dB)
Audio Output LevelLine Out: 1V, Monitoring: 25-30mW
Power Requirements3.3V-4.7V
Battery TypeBuilt-in Lithium Battery, 400mAh
Battery Charging Time1.5H
Battery Life5H
Dimensions52X42X16mm
MaterialPlastic
Weight35g
Microphone
Form FactorBuilt-in/External Mic
Sound FieldMono
Polar PatternOmnidirectional
Frequency Range50Hz-20KHz
Sensitivity-40dB (±3 dB, re 1V/Pa at 1KHz)
Maximum SPL135dB SPL (at 1KHz)

Warranty

Warranty Period

Thank you for purchasing SYNCO products.

  1. Customers are entitled to free replacement or repair service in case of the quality defect(s) found in the product under normal use within 30 days upon receipt of the product.
  2. Original SYNCO products are entitled to a 12-month limited warranty serThe warranty period begins on the date of purchase of brand new, unused products by the first end-user. Within the warranty period, if a product defect or failure is attributable to defection or technological problem, the defective product or defective part will be repaired or replaced without charge (service and materials fee).

Warranty Exclusions and Limitations

  • Faults resulted from inappropriate use of a product without following operation specification
  • Artificial damage, e.g. crash, squeeze, scratch, or soaking
  • Modifications to a product by its user or a third party without prior write consent of SYNCO, e.g. replacement of element or circuit, label alteration
  • The code on the product is inconsistent with that of the warranty certificate, or the code on the product or warranty certificate is altered or torn off
  • All consumable accessories attached to a product, like a cable, wind muff,
    battery
  • Faults as a result of force majeure, such as fire, flood, lightning, etc.
    Warranty Claim Procedure
  • If failure or any problem occurs to your product after purchase, please ca local agent for assistance, or you can always contact SYNCO’s customer
    service through email at [email protected].
  • Please retain your sales receipt and warranty certificate as proof of purchase.
    If any of these documents are missing, only sales return or chargeable ser
    will be provided.
  • If the SYNCO product is out of the warranty coverage, the service and the
    parts cost will be charged.

Guangzhou Zhiying Technology Co., Ltd
SYNCO -icon1Block 15th, No.200 Fangcun Avenue East, Liwan District, Guangzhou, China, 510000
SYNCO -icon2[email protected]
SYNCO -icon3www.syncoaudio.com
SYNCO -icon4https://www.facebook.com/syncomicrophones

WARRANTY CERTIFICATE

Please register your warranty. Meanwhile, you are welcome to contact us
via Email:[email protected]

USER INFORMATIONCustomer Name:
Phone Number:
Email:
Address:
SALES INFORMATIONSales Date:
Model:
Product Code:
Dealer:
REPAIR RECORDService Date:
Technician:
Issue:

RESULT
Solved Unsolved Returned(Replaced)

References

Documents / Resouces

Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.


Related Manuals