VERPAN PANTOP Portable Table Lamp
CONTENT
- A PANTON TABLE LAMP. THE LAMP IS DELIVERED FULLY
- ASSEMBLED.
- B USB CHARGING CABLE
BEFORE USE, THE BATTERY IN THE LAMP MUST BE FULLY CHARGED.
PLACE THE MAGNETIC CHARGING CABLE AT THE BOTTOM OF THE LAMP. CONNECT THE USB CABLE TO A POWER SUPPLY.
CHARGING: RED LIGHT
- FULLY CHARGED: GREEN LIGHT
- THE LIGHT INTENSITY OF THE LAMP CAN BE ADJUSTED BY TOUCHING THE DIMMER KNOB ON THE TOP OF THE LAMP.
- THE LAMP HAS 3 LIGHT
- INTENSITY LEVELS: 100%, 70% AND 30%.
IMPORTANT
- THIS LAMP IS FOR INDOOR USE ONLY. IT CAN BE TAKEN OUTDOORS BUT MUST BE KEPT AND STORED INDOORS.
- BATTERIES MUST BE DISPOSED OF ACCORDING TO LOCAL ENVIRONMENT AL LAWS FOR WASTE DISPOSAL.
- WIPE THE SURFACE WITH A SOFT, DAMP CLOTH, AND WIPE IMMEDIATE
- TELY WITH A DRY CLOTH. DO NOT USE ANY ABRASIVE CLEANING TOOLS.
- THE BATTERY MUST BE REMOVED FROM THE LAMP BEFORE IT IS SCRAPPED; THE APPLIANCE MUST BE DISCONNECTED FROM THE SUPPLY MAINS WHEN REMOVING THE BATTERY; THE BA TTERY MUST BE DISPOSED OF SAFELY.
- IF THE EXTERNAL FLEXIBLE CABLE OR CORD OF THIS LUMINAIRE IS DAMAGED, IT SHALL BE REPLACED BY A SPECIAL CORD OR CORD EXCLUSIVELY AVAILABLE FROM THE MANUFACTURER OR HIS SERVICE AGENT.
- THE PRODUCT SHALL BE SUPPLIED BY AN EXTERNAL SELV CONTROLLER WITH 5V MIN. 1A OUTPUT
- INPUT MICRO USB CABLE 5.0 = 1A
- 1.5W LED BOARD
- CHARGING TIME: 5 HOURS
- OPERATION TIME IN HIGHEST SETTING: 7 HOURS
- VERPAN
- Egeskovvej 29
- 8700 Horsens
- Denmark
- www.verpan.com
- [email protected]
Verpan.com – Official Verpan webshop – VERPAN International
