Macbook 13 Inch Mid 2006 Mid 2008 Memory
Product Information:
Product Name: Apple MacBook 13 Mid 2006 – Mid 2008
Manufacturer: Apple
Model: MacBook 13
Compatible Models: Mid 2006 – Mid 2008
Product Usage Instructions:
- Ensure that the MacBook is powered off and all cables have been
disconnected. - To remove the Memory Cover, unscrew the 3 screws from the back
wall of the Battery compartment. - Slide the Memory Cover to the right and lift it out of the
MacBook. - To remove any existing RAM, pull back the metal lever to slide
the RAM module out. - To install the new RAM, push the module firmly and evenly into
the slot. Refer to the diagram on the MacBook for the correct
placement of notches. The orientation of the stickers on the module
does not matter. You will hear an audible click when the module is
seated correctly. - Reassemble the MacBook in the reverse order that it was taken
apart. Turn on the laptop. Ideally, ensure that the MacBook is
fully charged or plugged into the mains. - The MacBook should now be running smoothly and faster than
before.
If you require any further installation support, please contact
our Customer Care & Support Team at:
Americanino Ltd T/A Mr Memory, D3 Yeoman Gate, Yeoman Way,
Worthing, West Sussex, BN13 3QZ, UK
Company Registration Number: 2012072
VAT No. 641166065
28
1994 -2022
We are a company based in the UK
APPLE MACBOOK 13″ MID 2006 – MID 2008 MEMORY INSTALLATION GUIDE
Mr Memor y®
Mr Memory is rated
APPLE 13″ MID 20 0 6 – MID 20 09 MEMORY INSTALL ATION GUIDE
WHAT YOU WILL NEED
CLEAR WORKSPACE
COIN
NEW MEMORY MODULE(S)
SCREWDRIVER
TO PREVENT ANY POTENTIAL DAMAGE FROM ANTI STATIC ELECTRICITY, YOU SHOULD DISCHARGE YOURSELF FIRST. THIS CAN BE DONE BY TOUCHING A GROUNDED METAL OBJECT – SUCH AS A RADIATOR.
STEP 1
Make sure the Macbook is powered off and all cables have been disconnected
STEP 2
Turn your MacBook over and remove the Battery using the coin in the Battery locking screw, rotate it 90 degrees clockwise.
STEP 3
To remove the Memory Cover, unscrew the 3 screws from the back wall of the Battery compartment.
Americanino Ltd T/A Mr Memory, D3 Yeoman Gate, Yeoman Way, Worthing, West Sussex, BN13 3QZ, UK
Company Registration Number: 2012072
VAT No. 641166065
APPLE 13″ MID 20 0 6 – MID 20 09 MEMORY INSTALL ATION GUIDE
STEP 4
Slide the Memory Cover to the right and lift out of the MacBook.
STEP 5
To remove any existing RAM, pull back the metal lever to slide the RAM module out.
STEP 6
To install the new RAM, push the module firmly and evenly into the slot. There is a diagram on the MacBook itself as to where the notches should be. Do not worry which way the
stickers on the module face, as they differ. There will be an audible click when the module is seated correctly.
STEP 7
Put the MacBook back together again in the reverse order that you took it apart. Turn the laptop back on. (Ideally the MacBook should be fully charged or plugged into the mains).
Everything should be running smoothly and quicker than before.
IF YOU REQUIRE ANY FURTHER INSTALLATION SUPPORT, PLEASE CONTACT OUR CUSTOMER CARE & SUPPORT TEAM
Americanino Ltd T/A Mr Memory, D3 Yeoman Gate, Yeoman Way, Worthing, West Sussex, BN13 3QZ, UK
Company Registration Number: 2012072
VAT No. 641166065
