AI-TODT-R9 Sous-Chef Toddler Tower
Product Information
The product is called Sous-chef Toddler Tower, a simple, modern,
and American-made product designed to assist toddlers in reaching
elevated surfaces.
Parts
- A – Left Side
- B – Right Side
- C – Back
- D – Platform
- E – Ladder
- F – Extra Step
- G – Dowel
- H – Guard Plate
Assembly Instructions
- Place Left Side A on a carpeted floor with slots facing
upward. - Place tabs of Back C into slots and use your weight to push
down. - Use a rubber mallet or push Back C horizontally to lock it in
place. - Spread sides just enough to insert Ladder E. If Platform D is
not on the lowest setting, also insert Extra Step F. - Push sides together, catching tabs on Ladder E and Extra Step F
in slots on sides. - Step on Ladder E to lock it into place.
- Repeat Steps 1-6 with the other side.
- Spread sides apart to insert tabs on Platform D into slots on
Back C at the desired height. - Push sides together to catch tabs on Platform D in slots on
sides. - Insert Guard Plate H for children under 32″ tall.
- Slide Dowel G into the hole from the side.
- Twist Dowel G while pushing down to lock it into place.
Note: It is the parent or guardian’s
responsibility to determine the safest platform height for their
child.
Disassembly Instructions
- Remove parts E, F, G, and H.
- Turn the tower upside down and place front legs against a
wall. - Push near the middle of C to unlock tabs.
- Use your weight to push C down to release.
Note: Adult assembly is required. Assemble
completely before use. Avoid placing the Toddler Tower in sitting
water. Do not use this product without adult supervision.
Need Help?
If you need assistance, please contact our customer service
agent at: +1 (833) 530-0033
You can also email us at: [email protected]
Watch our assembly video at: sprout-kids.com/tta
Contact Information
QUARK ENTERPRISES, LLC
PO BOX 1123, PROVO, UT 84601
Model No.: TODT-NAT-S
Website: www.sprout-kids.com
COPYRIGHT QUARK ENTERPRISES 2020
PARTS
A
Left Side
B
Right Side
ASSEMBLY INSTRUCTIONS
Place Left Side A on carpeted floor with slots facing upward. Place tabs of Back C into slots and use your weight to push down. Then use rubber mallet or push Back C horizontally to lock in place.
1
C 2
A
Spread sides just enough to insert
Ladder E . Unless Platform D is on
lowest setting, also insert Extra Step F .
Push sides together, catching tabs on
Ladder E and Extra Step F in slots on
sides.
D
F 1
2
1
E
2
Step on Ladder E to lock into place.
Simple. Modern. American Made.
Sous-chef Toddler Tower
Make sure the side with the Step on the tab faces the same direction as the Notch in the slot.
slot
Notch
tab
Step
28″-32″ Child* 32″-38″ Child* 38″-44″ Child*
C
D
Back
Platform
E
Ladder
F
Extra Step
G
Dowel
H
Guard Plate
BEFORE YOU START
RECCOMENDED: A rubber mallet can help push pieces together. A hammer can also be used with a scrap piece of wood or a cutting board placed over the surface being hammered for protection.
2 NOTCH
Repeate Step 1 with the other side. Place Side on carpet and insert Back C tabs into the slots. Then stand up the assembly and push down on Back C to lock them into place.
2 3
B Cc a
A
Cc 1
B
Spread sides apart to insert tabs on Platform D into slots on Back C at desired height. Push sides together to catch tabs on Platform D in slots on sides.
C
1
D 3
1
3
E
Insert Guard Plate H for children under 32″ tall. Then slide Dowel G into hole from side. Twist Dowel G while pushing down to lock into place.
G
H
TWIST WHILE PUSHING
For disassembly, once parts E F G and H have been removed, turn the tower upside down and place front legs against a wall. Push near the middle of C to unlock tabs, then use your weight to push C down to release.
2
11 C
*Recommendations only. It is the parent or guardian’s responsibility to determine the safest platform height for their child
Adult assembly only Assemble completely before use
Avoid placing the Toddler Tower in sitting water Do not use this product without Adult Supervision
Frustrated?
STOP
Need Help?
Talk to our customer service agent at:
+1 (833) 530-0033 Or email us at:
[email protected] Watch our assembly video at:
sprout-kids.com/tta
QUARK ENTERPRISES, LLC PO BOX 1123, PROVO, UT 84601
MODEL NO. TODT-NAT-S DOCUMENT: AI-TODT
WWW.SPROUT-KIDS.COM
COPYRIGHT QUARK ENTERPRISES 2020















