Crystorama 130-mk Calypso Three Light Mini Chandelier Instruction Manual

130-MK Calypso Three Light Mini Chandelier

Product Information

The Crystorama Lighting Fixture is a high-quality and durable
lighting solution designed to add elegance and style to any space.
With a long-standing reputation of sixty years, Crystorama has been
lighting the way with their exceptional craftsmanship and attention
to detail.

The model number for this fixture is 130-MK and it can be found
on the Crystorama website at crystorama.com. This fixture is
designed for both hanging and ceiling installation.

Important Safety Warning: It is crucial that all electrical
components of this fixture are installed by a licensed electrician
in accordance with the National Electric Code and local electrical
codes. Failure to do so may result in electrical danger.

This fixture is damp rated, making it suitable for use in areas
with high humidity levels.

Product Part Numbers:

• A. (1)-Mounting hardware
• B. (1)-Canopy W5-7/8”xH1-1/8” #XRF130MKCAN6IN
• C. (2)-Finial #XRF130MKFIN
• D. (2)-Loop #XRF130MKLOOP
• E. (1)-Chain -L72”, 4mm thick #XRF130MKCHA4MM
• F. (1)-Metal ring
• G. (1)-Bottom basket #XRF130MKBT
• H. (3)-Socket

This product contains lead, which is known to the state of
California to cause cancer and/or birth defects or reproductive
harm. For more information, please visit www.P65Warnings.ca.gov.

Product Usage Instructions

Hanging Installation:

1. Determine the preferred hanging height and adjust the chain
   accordingly.
2. Open one link of the chain and connect it to the fixture loop,
   then close the link.
3. Open another link of the chain and connect it to the loop of
   the canopy, then close the link.
4. Thread the mounting screws into the matching holes of the
   mounting bar and tighten with the small hex nut.
5. Secure the mounting bar to the outlet box using the outlet box
   screws.
6. Raise the canopy, allowing the mounting screws to protrude
   through the holes in the canopy, and secure with the ball nut.
7. Hang crystals on the metal ring and bottom basket, alternating
   between glass drop A and B.
8. Hang glass drop C at the bottom of the bottom basket.
9. Install the bulb (not included) into the socket.

Ceiling Installation:

1. Loosen the hex nut of the canopy and disassemble the
   canopy.
2. Remove the loop on the top of the fixture.
3. Slip the canopy, metal washer, and lock washer over the nipple,
   then secure with the hex nut.
4. Thread the mounting screws into the matching holes of the
   mounting bar and tighten with the small hex nut.
5. Secure the mounting bar to the outlet box using the outlet box
   screws.
6. Raise the canopy, allowing the mounting screws to protrude
   through the holes in the canopy, and secure with the ball nut.
7. Install the bulb (not included) into the socket.
8. Hang crystals on the metal ring and bottom basket, alternating
   between glass drop A and B.
9. Hang glass drop C at the bottom of the bottom basket.

Note: The fixture requires 3 Candelabra Base Bulbs with a
recommended wattage of 40 Watts and a maximum wattage of 60 Watts.
For extended use, it is recommended to use LED bulbs.

CRYST RAMA
LIGHTING THE WAY FOR SIXTY YEARS
ASSEMBLY INSTRUCTION MODEL#130-MK

Crystorama.com

WARNING:

Loop

Electrical Danger Turn Power off

Socket Bottom basket
C-1set

All electrical components must be

Metal ring

installed by a licensed electrician in accordance with the National

Electric Code and the appropriate

A-26sets B-26sets

local electrical codes.

A-21sets B-21sets
A-16sets B-16sets
A-11sets B-11sets A-5sets B-5sets

You will need 3- Candelabra Base Bulb 40 Watts Recommended 60 Watts Max. USE LED BULBS FOR EXTENDED USE This fixture is Damp rated
How to install

For hanging:

Hang crystals on the rings alternating between crystals A and B
5-7/8”
1-1/8”

1.Determine the preferred hanging height and adjust to the chain required.
2.Open one link of chain connect it to fixture loop and close the link. Open the other one link of chain connect it to loop of canopy and close the link.
3.Thread the mounting screws into the matching holes of the mounting bar, and tighten with the small hex nut.
4.Secure the mounting bar to the outlet box with the outlet box screws.
5.Raise canopy allowing the mounting screws to protrude through the holes in the canopy, and secure with the ball nut.
6.Hang crystals to the metal ring and bottom basket, alternating between glass drop A and B.
7.Hang glass drop C at the bottom of the bottom basket.
8.Install the bulb(not included) into the socket.

14-1/2”

13”

14”

For ceiling:
1.Loose the hex nut of canopy and disassemble canopy.
2.Remove the loop on the top of the fixture. 3.Slip the canopy, the metal washer and lock washer over
the nipple, then secure with the hex nut. 4.Thread the mounting screws into the matching
holes of the mounting bar, and tighten with the small hex nut. 5 Secure the mounting bar to the outlet box with . the outlet box screws.
6.Raise canopy allowing the mounting screws to protrude through the holes in the canopy, and secure with the ball nut.
7.Install the bulb(not included) into the socket.
8.Hang crystals to the metal ring and bottom basket, alternating between glass drop A and B.
9.Hang glass drop C at the bottom of the bottom basket.

A= 30mmx79sets

B=

76mmx79sets

C=

(30mm Ball with chain)x1set

WARNING: This product can expose you to Lead which is known to the state of California to cause cancer and/or birth defects or reproductive harm. For more information go to www.P65Warnings.ca.gov

CRYST RAMA
LIGHTING THE WAY FOR SIXTY YEARS
PART NUMBER MODEL#130-MK

Crystorama.com

Part Number
Part Numbers A. (1)-Mounting hardware B. (1)-Canopy W5-7/8”xH1-1/8” #XRF130MKCAN6IN C. (2)-Finial #XRF130MKFIN D. (2)-Loop #XRF130MKLOOP E. (1)-Chain -L72”, 4mm thick #XRF130MKCHA4MM F. (1)-Metal ring G. (1)-Bottom basket #XRF130MKBT H. (3)-Socket

FOR HANGING:

SMALL HEX NUT
C

A
HEX NUT
B D
E

FOR CEILING:

H G

SMALL HEX NUT

LOCK WASHER

B

D

C

F Crystal A
Crystal B

HEX NUT METAL WASHER
NIPPLE

Crystal C