TCDP04209IPDSB Rise Pole Stand
Product Information
The Rise Pole Stand is available in two models: Rise Pole Stand
10 and Rise Pole Stand 20. It comes in four different SKUs: TCDP04,
TCDP04W, TCDP01, and TCDP01W. The product is designed to securely
hold a tablet enclosure for various applications. It can be
installed on a counter top or below the counter.
Assembly Instructions (Installation On Counter Top)
- Counter Mounting Pattern:
- 25.40mm (1.50 in)
- If wiring through the counter, use a 23.80mm (0.94 in)
hole - 67.31mm (2.65 in) B.C.
- 4X 5.6mm (0.219 in, 7/32 in) screws
- Wire Pass Thru from Enclosure:
- Wire Inlet
- If mounting to a monitor, remove M4 press-in nuts
- Install your tablet enclosure using M4 screws provided with the
enclosure - Wire Outlet
- Accessories:
- 3.28″ (83.32mm) diameter cover
- Hardware Kit
- Fixed Pole Stand
- Adhesive Base
- Single Add On Bracket
Assembly Instructions (Installation Below Counter)
- Bottom View of Counter:
- Remove 100mm plate and cover plate
- 44.50mm (1.75 in)
- 67.31mm (2.65 in) B.C.
- 23.80mm (0.94 in)
- 4X 5.6mm (0.219 in, 7/32 in) screws
- Reinstall 100mm plate and adjust tilt tension
- Counter screws should be shorter than counter depth
For more information, visit www.compulocks.com, contact
[email protected], or
call +1 800-948-0344.
Rise Pole Stand 10, 20 SKU: TCDP04, TCDP04W, TCDP01, TCDP01W
Assembly Instructions
Installation On Counter Top
1
COUNTER MOUNTING PATTERN
25.40mm 1.50 in
IF WIRING THRU COUNTER
23.80mm .94 in
67.31mm 2.65 in B.C.
23.80mm .94 in
4X 5.6mm .219 in, 7/32 in
14 X 1 ½” SHEET METAL SCREWS
2
3
WIRE PASS THRU FROM ENCLOSURE
WIRE INLET
IF MOUNTING TO A MONITOR
COVER PLATE
REMOVE M4 PRESS IN NUTS 3.21″ 81.53mm MOUNTING FLANGE DIAMETER
4
INSTALL YOUR TABLET ENCLOSURE AS SHOWN
USING M4 SCREWS PROVIDED WITH ENCLOSURE
IN THE BOX
WIRE OUTLET
ACCESSORIES
3.28″ COVER 83.32mm DIAMETER
Hardware Kit
Fixed Pole Stand
Adhesive Base
Single Add On Bracket
©Compulocks Brands Inc. All Rights Reserved.j
www.compulocks.com | [email protected] | +1 800-948-0344
ASSEMBLY COMPLETE
Free Standing Base Sheet 1 of 2
Rise Pole Stand 10, 20 SKU: TCDP04, TCDP04W, TCDP01, TCDP01W
Assembly Instructions
Installation Below Counter
1
BOTTOM VIEW OF COUNTER
23.80mm .94 in
REMOVE 100mm PLATE AND COVER PLATE
44.50mm 1.75 in
67.31mm 2.65 in B.C.
2
23.80mm .94 in
4X 5.6mm .219 in, 7/32 in
3
REINSTALL 100mm PLATE ADJUST TILT TENSION
COUNTER
SCREWS SHOULD BE SHORTER THAN
COUNTER DEPTH
©Compulocks Brands Inc. All Rights Reserved.j
www.compulocks.com | [email protected] | +1 800-948-0344
Sheet 2 of 2
Compulocks - Leader of security and kiosks for digital brand experiences
