4U01000P00019P01D 19 Rack Module Holder
Product Information
The 19 rack module holder and 19 rack DIN module holder are
enclosures designed for mounting in 19-inch racks or on walls. The
19 rack module holder features a lockable door made of plexiglass
and comes with a tamper switch as standard. It can also be equipped
with a mounted DIN rail for attaching circuit breakers, power
supplies, or other components with a DIN rail bracket. When the DIN
rail is mounted, the unit is referred to as the 19 rack DIN module
holder.
The 19 rack module holder is a sheet metal housing suitable for
19-inch racks or direct wall mounting. It includes a tamper switch.
The 19 rack DIN module holder is also a sheet metal housing with a
DIN rail for 19-inch racks or direct wall mounting. It comes with a
tamper switch.
The cable entries may vary depending on the version of the sheet
metal housing, but the number of card slots remains the same across
different versions.
Technical Data: 19 Rack Module Holder and 19 Rack DIN Module
Holder
| Short name | Version | E-number | Product description |
|---|---|---|---|
| 19 rack module holder | 4U010000P00019P01 | 5001063 | 19-inch module for mounting Milleteknik’s fuse card and/or alarm device monitoring card. Can be used with Linjator’s connection modules and/or Sentrion DSS modules. |
| 19 rack DIN module holder | 4U01000P00019P01D | 5001064 | Sheet metal housing with DIN rail for 19-inch racks or direct wall mounting. Comes with a tamper switch. Can accommodate 20 circuit breakers. |
Product Usage Instructions
To use the 19 rack module holder or the 19 rack DIN module
holder, follow these steps:
- Choose the appropriate version of the product based on your
requirements. - If using the 19 rack module holder, mount it in a 19-inch rack
or directly on a wall. If using the 19 rack DIN module holder,
ensure the DIN rail is properly mounted in a 19-inch rack or
directly on a wall. - If necessary, connect circuit breakers, power supplies, or
other components with a DIN rail bracket to the module holder. - If using the tamper switch, ensure it is properly connected and
functioning. - If applicable, insert the desired modules into the available
card slots of the module holder. You can mix different cards among
the slots, but remember that the number of slots cannot be
increased. - Once everything is set up, the module holder is ready for
use.
Note: Please refer to the original Swedish manual for accurate
translation and verification before using this product.
Technical Data: Tamper Switch
| Name | Article number | Type | Voltage |
|---|---|---|---|
| T-Tamperswitch | A-0000000SAB01 | Microswitch | 12 V / 24 V |
Address and Contact Details
For more information, visit www.milleteknik.se.
SVENSKA
2023-03-10
OM 19 RACK MODULE HOLDER OCH 19 RACK DIN MODULE HOLDER
19 rack module holder och 19 rack DIN module är en fyra höjdenheters hög kapsling för montering i 19″ rack eller på vägg. 19 rack module holder har låsbar dörr i plexiglas och kommer med sabotagekontakt som standard. Enheten finns även med monterad DIN-skena för att fästa tillval som automatsäkringar som har DIN-skene fäste. Med DIN-skena monterad heter enheten: 19 rack DIN module holder.
19 rack module holder*
Plåtkapsling för 19″ rack eller montering direkt på vägg, levereras med sabotagekontakt. 19 rack DIN module holder*
Plåtkapsling med DIN-skena för 19″ rack eller montering direkt på vägg, levereras med sabotagekontakt.
*Kabelgenomföringar kan variera beroende på version av plåtkapsling, antalet kortplatser är detsamma i de olika versionerna.
TEKNISKA DATA: 19 RACK MODULE HOLDER OCH 19 RACK DIN MODULE HOLDER
Produktnamn: Artikelnummer: E-nummer: Produktbeskrivning:
Antal modulplatser
Sabotagekontakt
19 rack module holder 4U010000P00019P01
5001063 19″ tums modul/linjal för montering av Milletekniks avsäkringskort och/eller larmdonsövervakningskort. Det är även möjligt att använda modulen tillsammans med Linjators kopplingsmoduler och/eller Sentrion DSS moduler. 8 st. L-moduler eller 4 st. 10 output module eller 4 st. Fire module 4 outputs. Det går bra att blanda kort bland modulplaser, men antalet modulplatser går ej att utöka. Ja
19 rack DIN module holder 4U01000P00019P01D
5001064 19″ tums modul/linjal för montering av automatsäkringar eller andra artiklar som har DIN-fäste.
20 st. automatsäkringar
Milleteknik AB, Ögärdesvägen 8 B, 433 30 Partille
www.milleteknik.se
2023-03-10
Produkten passar i: Höjdenheter: Material Mått:
19 rack eller montering direkt på vägg. Vändbara konsoler, (standardmontering från fabrik är för rackmontage).
4HE Plåtkapsling i pulverlackad plåt med låsbar dörr i plexiglas. Sabotagekontakt ingår. Bredd: 482,5, höjd: 173 mm, djup: 108 mm.
Tillverkad i Milletekniks fabrik i Partille, Sverige.
Bruksanvisning i original: Svenska.
TEKNISKA DATA: SABOTAGEKONTAKT
Artikelbenämning Artikelnummer Typ Spänning
Tamperswitch A-0000000SAB01 Microbrytare 12 V / 24 V
ADRESS OCH KONTAKTUPPGIFTER
Milleteknik AB Ögärdesvägen 8 B 433 30 Partille 031-340 02 30 www.milleteknik.se
www.milleteknik.se
Milleteknik AB, Ögärdesvägen 8 B, 433 30 Partille
ENGLISH
2023-03-10
ABOUT 19 RACK MODULE HOLDER AND 19 RACK DIN MODULE HOLDER
19 rack module holder and 19 rack DIN module is a four unit high enclosure for mounting in 19 “racks or on a wall. 19 rack module holder has a lockable door in plexiglass and comes with tamper connector as standard. The unit is also available with mounted DIN rail for to attach options such as circuit breakers, power supplies or other components that have a DIN rail bracket.With DIN rail mounted, the unit is called: 19 rack DIN module holder.
19 rack module holder
Sheet metal housing for 19 “rack or mounting directly on the wall, the product comes with a tamper switch. 19 rack DIN module holder
Sheet metal housing with DIN rail for 19 “rack or mounting directly on the wall, the product comes with a tamper switch.
*Cable entries may vary depending on the version of sheet metal housing, the number of card slots is the same in the different versions.
TECHNICAL DATA: 19 RACK MODULE HOLDER AND 19 RACK DIN MODULE HOLDER
Short name: Version: E-number: Product description
Number of module slots
Tamper switch
19 rack module holder
4U010000P00019P01
5001063
19” inch module for mounting Milleteknik’s fuse card and/or alarm device monitoring card. It is also possible to use the module together with Linjator’s connection modules and/or Sentrion DSS modules.
8 pcs. L-modules or 4 pcs. 10 output modules or 4 pcs. Fire module 4 outputs. It is fine to mix cards among module slots, but the number of module slots cannot be increased.
Yes
19 rack DIN module holder 4U01000P00019P01D 5001064 Sheet metal housing with DIN rail for 19 “rack or mounting directly on the wall, the product comes with a tamper switch.
20 pcs. circuit breakers
Milleteknik AB, Ögärdesvägen 8 B, 433 30 Partille
www.milleteknik.se
2023-03-10
The product fits in Rack units: Material Measure
Battery backup with PRO3 card.
4RU Sheet metal enclosure in powder-coated sheet metal with lockable plexiglass door. Tamper switch included. Width: 482,5, height: 173 mm, depth: 108 mm
Manufactured in Milleteknik’s factory in Partille, Sweden.
This translation is not verified and should be cross referenced with the swedish original before use.
TECHNICAL DATA: TAMPER SWITCH
Name Article number Type Voltage
T-Tamperswitch A-0000000SAB01 Microswitch 12 V / 24 V
ADDRESS AND CONTACT DETAILS
Milleteknik AB Ögärdesvägen 8 B S-433 30 Partille +46 31 340 02 30 www.milleteknik.se
www.milleteknik.se
Milleteknik AB, Ögärdesvägen 8 B, 433 30 Partille
