TD20033FL 4-Light Flush Mount Lighting
Product Information: 4-Light Flush Mount Lighting
The 4-Light Flush Mount Lighting is a ceiling fixture that can
be mounted directly onto an outlet box. The fixture is composed of
a fixture body, stem, canopy, finial, and mounting strap. It also
has four lamp sockets that use E26 bulbs with a maximum power of
60W. The fixture has two wire groups – Group A (Green, Bare copper
wire, and White Ribbed) and Group B (Mounting strap, Screw, Canopy,
Finial, Stem, and Bulbs). The fixture has an input voltage of
120V.
Product Usage Instructions
Step 1: Screw the Stem (C) to the Fixture body
(A).
Step 2: Fix the Mounting strap (H) to the
outlet box with Screw (F).
Step 3: Pass the wire through Canopy (E) and
screw Canopy (E) onto Stem (C).
Step 4: Connect the wires according to the
picture above. Refer to the wiring instruction for details.
Step 5: Pass Canopy (E) through Screw (G) and
fix it with Finial (D).
Step 6: Install Bulbs (B) into the socket.
(suggested bulb type: A15)
Wiring Instruction
Step 1: Insert the green grounding screw into
the hole with two raised dimples on the mounting bar. Wrap the
ground wire from the fixture (if supplied) around the green
grounding screw, then connect it to ground wire from the outlet box
(if not fixed on the outlet box) using a wire connector (not
supplied). If ground wire from the fixture is not supplied, wrap
the ground wire (if not fixed on the outlet box) from the outlet
box around the green grounding screw and tighten it. NEVER CONNECT
GROUND WIRE TO BLACK OR WHITE POWER SUPPLY WIRES.
Step 2: Take note of the color of the wire(s)
on your fixture. Identify which group your fixture wire(s) falls
into and connect the wires according to the directions below:
- [GROUP A]: Connect to Black House Wire
- [GROUP B]: Connect to White House Wire
Step 3: Take your fixture wire(s) from [Group
A] and place evenly against the black wire from the outlet box. Do
NOT twist wires together before using wire connectors.
Step 4: Fit a wire connector over the wires and
screw the connector clockwise until you feel firmness.
Step 5: Try gently to pull the connector off
the wires. If you can pull the connector off, carefully re-do steps
3 and 4 as above, and check again for a firm connection.
Step 6: Connect the fixture wire from [Group B]
to the white wire from the outlet box in the same manner. Make sure
no bare wires can be seen outside wire connectors.
Cleaning Instructions
To clean, wipe fixture with a soft cloth. Clean glass with a
mild soap. Do not use abrasive materials such as scouring pads or
powders, steel wool or abrasive paper.
Safety Information
Always switch off the electricity supply and allow to cool for
10 minutes before changing the light bulbs.
Contact Information
E-mail: [email protected]
Print in China
Instruction Manual
4-Light Flush Mount Lighting
Overview
Outlet box Black
Wire nuts Smooth
[GROUP A]
Green(Ground)
Bare copper wire(Ground)
White Ribbed
[GROUP B]H.Mounting strap
G.Screw
F.Screw
E.Canopy D.Finial
C.Stem B.Bulbs(not included)
A.Fixture body
Assembly Instruction
1.Screw Stem (C) to Fixture body (A). 2.Fix Mounting strap (H) to outlet box with Screw (F). 3.Pass the wire through Canopy (E) and screw Canopy (E)
onto Stem (C). 4.Connect the wires according to the picture above.
(Please refer to the wiring instruction for details )
5.Pass Canopy (E) through Screw (G) and fix it with Finial (D).
6.Install Bulbs (B)(not included) into the socket. (suggested bulb type: A15)
Wiring Instruction
1. Insert the green grounding screw into the hole with two raised dimples on the mounting bar. Wrap the ground wire from the fixture (if supplied) around the green grounding screw, then connect it to ground wire from the outlet box (if not fixed on the outlet box) using a wire connector(not supplied). If ground wire from the fixture is not supplied, wrap the ground wire (if not fixed on the outlet box) from the outlet box around the green grounding screw and tighten it.
NEVER CONNECT GROUND WIRE TO BLACK OR WHITE POWER SUPPLY WIRES.
2.Take note of the color of the wire(s) on your fixture. Identify which group your fixture wire(s) falls into and connect the wires according to the directions below:
[GROUP A]: Connect to Black House Wire [GROUP B]: Connect to White House WireBLACK
WHITE
*PARALLEL WIRE (round & smooth) *PARALLEL WIRE (square & ridged)
WHITE OR GREY WITH TRACER WHITE OR GREY WITHOUT TRACER
BROWN, GOLD OR BLACK WITHOUT TRACER
BROWN, GOLD OR BLACK WITH TRACER
3.Take your fixture wire(s) from [Group A] and place evenly against the black wire from the outlet box. Do NOT twist wires together before using wire connectors. 4.Fit a wire connector over the wires and screw the connector clockwise until you feel firmness. 5.Try gently to pull the connector off the wires. If you can pull the connector off, carefully re-do steps 3 and 4 as above, and check again for a firm connection.
6. Connect the fixture wire from [Group B] to the white wire from the outlet box in the same manner. Make sure no bare wires can be seen outside wire connectors.
Product Specifications
Input voltage 120V Rated power 60W MAX Lamp socket E26
Product Packaging
Fixture body × 1 Stem × 1 Mounting strap × 1 & Canopy × 1 Screw × 2 & Wire nut × 3 Lamp instruction × 1
Cleaning
To clean, wipe fixture with a soft cloth. Clean glass with a mild soap. Do not use abrasive materials such as scouring pads or powders, steel wool or abrasive paper.
Safety Information
Always switch off the electricity supply and allow to cool for 10 minutes before changing the light bulbs.
CONTACT US
E-mail:[email protected]
Print in china
Digital Services, Technology and Consulting | Reply
