knog Blinder Link Light Saddle Mount
WHAT’S IN THE BOX
OPERATION
LONG PRESS ON/OFF
STANDARD PRESS CYCLES THROUGH ALL 8 MODES
MOUNTING
REMOVE THE LIGHT FROM THE MOUNT
LOOSEN THE BOLT TO OPEN THE CLAMP
INSERT THE MOUNT BETWEEN THE SADDLE RAILS AT THE WIDEST POINT, THEN LOWER THE MOUNT INTO THE DESIRED POSITION
ONCE IN POSITION, TIGHTEN THE BOLT
SLIDE THE LIGHT BACK ONTO THE MOUNT
ADJUST THE LIGHT TO THE DESIRED ANGLE & TIGHTEN THE BOLT
WEARABLE
THE INTEGRATED CLIP-MOUNT TURNS THE BLINDER LINK INTO A WEARABLE LIGHT
- THE CLIP-MOUNT IS DESIGNED TO MOUNT TO THICK MATERIALS AND STRAPS
- MAKE SURE THE LIGHT IS MoUNTED VERTICALLY WITH THE POWER BUTTON AT THE TOP
- WHEN WEARING THE LIGHT, MAKE SURE THE LIGHT IS TIGHTLY
- FITTED AND SECURE BEFORE USE
BATTERY STATUS
WHEN THE BATTERY IS RUNNING LOW, THE RED LED WILL APPEAR
CHARGING
CAREFULLY OPEN THE CHARGING-PORT HATCH
INSERT USB C CHARGING CABLE RED LED INDICATES CHARGING
GREEN LED INDICATES FULLY CHARGED
MODES &RUNTIMES
DESIGNED BY KNOG MELBOURNE, AUSTRALIA 2 YEAR WARRANTY
KNOG.COM
