Inr Arc 13 Frame Shower Corner Customized - Polished User Guide

Inr Arc 13 Frame Shower Corner Customized - Polished User Guide

ARC 13 Frame Shower Corner Customized – Polished
User GuideINR ARC 13 Frame Shower Corner Customized PolishedINR ARC 13 Frame Shower Corner Customized Polished - br code

INR ARC 13 Frame Shower Corner Customized Polished - icon

COMPONENTSINR ARC 13 Frame Shower Corner Customized Polished - fig 16

SAFETY REGULATIONS

CE SYMBOLis product complies with standard EN 14428. All glass is tempered safety glass according to EN12150.
INR ARC 13 Frame Shower Corner Customized Polished - fig 15Goggles are recommended to protect your eyes.
INR ARC 13 Frame Shower Corner Customized Polished - fig 14Always use non-slip safety gloves.
INR ARC 13 Frame Shower Corner Customized Polished - fig 13Use safety shoes during installation.
INR ARC 13 Frame Shower Corner Customized Polished - fig 12We recommend that two persons are present at the installation.
INR ARC 13 Frame Shower Corner Customized Polished - fig 11Note! Always set the glass down on a soft foundation,
since edges and corners are very delicate.

INSTALLATIONINR ARC 13 Frame Shower Corner Customized Polished - fig 10INR ARC 13 Frame Shower Corner Customized Polished - fig 9

Screw fastenings should be made in concrete or other solid structure (a), wooden studs, wooden noggings (b) or in structures that have been tested and approved for fastenings, for example, a sheet construction (c). Requirements for sealing apply in wet zones 1 and 2. See examples of construction at säkervatten.se. Sealing materials must be fi xed to the underlying layer and must be waterproof, mold-resistant, and age-resistant.

INR ARC 13 Frame Shower Corner Customized Polished - fig 8INR ARC 13 Frame Shower Corner Customized Polished - fig 7INR ARC 13 Frame Shower Corner Customized Polished - fig 6INR ARC 13 Frame Shower Corner Customized Polished - fig 5INR ARC 13 Frame Shower Corner Customized Polished - fig 4INR ARC 13 Frame Shower Corner Customized Polished - fig 3INR ARC 13 Frame Shower Corner Customized Polished - fig 2INR ARC 13 Frame Shower Corner Customized Polished - fig 1INR ARC 13 Frame Shower Corner Customized Polished - figWARRANTY

On all shower enclosures in the ARC, EPIC, and LINC series, we leave a 15-year warranty against any manufacturing defects. On BRIC and BASIC models, we leave a 5-year warranty. Sealing strips and magnetic strips are not covered by the warranty but are considered consumables. We recommend that the strips are replaced annually to remain fresh.
CARE ADVICE
Clean daily with water and a squeegee. To combat ingrained dirt, you are recommended to use a detergent intended for the purpose. Remember that sponges and abrasive paste cleaners can scratch both the glass as well as metal.

RECYCLING

  1. Wear protective goggles and gloves.
  2. Separate the sealing strip from the glass.
  3. Place some form of protection under the glass.
  4. Strike one corner with a hammer to break the glass.
  • Take glass to the glass recycling facility
  • Take aluminum and screws to the metal recycling facility.
  • Take plastic strips and components to the plastic recycling facility.

INR Norge
Fjordgaten 13 A
3125 Tønsberg
Norge
Tel +47 33 33 02 00
[email protected]
www.inr.no

References

Documents / Resouces

Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.


Related Manuals