Dams Aurora Mesh Office Chair High Back Instructions

dams Aurora Mesh Office Chair High Back Instructions

AUR300T1-K

What is in the box

• (A) 1PC
  
• (B) 3PC
  
• (C) 2PC
  
• (D) M6X25mm 10PC
  
• (E) M6X16mm 4PC
  
• (F) 1PC
  
• (G) 5mm 1PC
  

ASSEMBLY INSTRUCTIONS

Please note that all fittings are packed with chair gas lift.

Do not tighten bolts fully until you have completed assembly.

“Should you require any assistance in assembling your goods please contact customer services on 0151 548 7111 between 9am/4:30pm.

WARNING

• DO NOT USE THIS CHAIR AS A STEPLADDER
• USE THIS PRODUCT ONLY FOR SEATING ONE PERSON AT A TIME
• DO NOT USE THIS CHAIR UNLESS ALL BOLTS, SCREWS AND KNOBS ARE FIRMLY SECURED
• AT LEAST EVERY 4 MONTHS CHECK ALL BOLTS, SCREWS AND KNOBS TO BE SURE THEY REMAIN TIGHT
• IF PARTS ARE MISSING, BROKEN, DAMAGED OR WORN, STOP USING THE PRODUCT UNTIL REPAIRS ARE MADE USING AUTHORIZED PARTS
• FAILURE TO FOLLOW THESE INSTRUCTIONS/WARNINGS COULD RESULT IN SERIOUS INJURY

IMPORTANT INFORMATION

• THE CHAIR CONTAINS SAFETY LOCK CASTORS.
• THE PURPOSE OF THESE SAFETY LOCK CASTERS IS TO TEMPORARILY LOCK THE WHEELS WHEN THE CHAIR IS NOT IN USE.
• THE LOCK WOULD BE RELEASED WHEN YOU SIT ON THE CHAIR.
• THIS PREVENTS THE CHAIR FROM ROLLING OFF ON ITS OWN WHEN ON SMOOTH HARD FLOOR.
• IF YOU PUSH THE CHAIR, IT REQUIRES MORE EFFORT AND MAY SEEM HARDER TO MOVE. THIS IS NOT A DEFECT.
• PLEASE ASSEMBLE THESE SAFETY LOCK CASTORS ON ALTERNATE LOCATIONS ON THE STAR BASE.