0-10V BLE Ceiling Mounted PIR Sensor Controller

0-10V BLE Ceiling Mounted PIR Sensor Controller

Product Information

The 0-10V BLE Ceiling Mounted PIR Sensor Controller is a device
that allows for control of lighting fixtures using a 0-10V signal.
It features a presence indicator, reset key, light sensor for
ambient light detection and daylight harvesting, and various input
and output parameters for power, signal, and control. The device
operates on a power supply of 12-24VDC and uses Bluetooth Low
Energy (BLE) technology for wireless communication.

Product Usage Instructions

1. Power up the sensor. The load should come on immediately.
2. Vacate the room or remain very still and wait for the load to
   switch off.
3. Bend the springs up and push the detector through the hole in
   the ceiling. When fully inserted, the springs snap back to hold the
   device in place. Take care when bending springs to avoid
   injury.
4. Enter the room or make some movement and check that the load
   switches on.

Specifications

• Energy Savings
• Sensing
• Comfort & Convenience
• Environment and Approbation

Warning

Ensure proper wiring according to the provided diagram. If
experiencing interference, try the following:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
  receiver.
• Connect the equipment into an outlet on a circuit different
  from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
  help.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including
   interference that may cause undesired operation. Changes or
   modifications not expressly approved by the party responsible for
   compliance could void the user’s authority to operate the
   equipment.

IC Statement

This device complies with Industry Canada’s licence-exempt RSSs.
Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including
   interference that may cause undesired operation of the device.

Update Log

Date: 2022-11-12
Version: V1.5
Update Content: FCC/IC Update

0-10V BLE Ceiling Mounted PIR Sensor Controller
Product Datasheet
Please read all instructions before installation
IC

www.sunricher.com

0-10V BLE Ceiling Mounted PIR Sensor Controller

Product info

Presense indicator

Reset Key: Long press it to help withdraw the device from internet/APP LED flashes quickly indicates success.

Light sensor: Ambient light detection and daylight harvesting

V+ GND

Parameters

+ 10V NC NC No Connection

Input

Power

Signal

Output, 0/1-10V
Current

Control

Environment

Dimming Curve

Dimming Operating Relative Method temperature humidity

Others Size

12-24VDC

Bluetooth Max. 20mA Logarithmic

PWM 0°C~+45°C 8% to 80% See dimensions

IC

www.sunricher.com
Features

0-10V BLE Ceiling Mounted PIR Sensor Controller

· 0-10V BLE ceiling mounted sensor controller, Bluetooth® mesh network
· PIR sensing with daylight haversting function
· Built-in 20mA 0-10V signal output
· Mesh network, which has a much longer control distance, transmits received signals to neighboring devices · All devices on 0-10V line are broadcast controlled by mobile application
· Supporting our kinetic energy switches and EnOcean switches EWSSB and EWSDB
· In typical indoor environment, the range for wireless communication is 20m to 25m . Actual range is dependent on field installation. · On-board antenna · Available with Magnetic reset (Touch the top part of sensor for 5 seconds) · Waterproof grade: IP20
· 5 years warranty

Dimension

IC

www.sunricher.com

Application

1

2

0-10V BLE Ceiling Mounted PIR Sensor Controller

1. Power up the sensor. The load should come on immediately.

2. Vacate the room or remain very still and wait for the load to switch off .

3

Bend the springs up and push detector through hole in ceiling. When fully

inserted the springs snap back to hold

the device in place.To avoid injury, take

care when bending springs.

3. Enter the room or make some movement and check that the load switches on.

Silvair Commissioning Tools

Installation complete.

Specifications
ENERGY SAVINGS
· Low/High-end trimming · Daylight harvesting · Occupancy/Vacancy detection · Auto and advanced demand response programs · Time-of-Day dimming schedule · Energy monitoring
SENSING
· Testing height: 2.5m · Detection area diameter: 8m @ 2.5m height
IC

COMFORT & CONVENIENCE
· Advanced occupancy detections · Light-level stability · Configurable dim-and-linger occupancy · Personalized setting profile · Work with kinetic switch keypad and dimmer wallstation · Multi-scenes control
ENVIRONMENT AND APPROBATION
· Operating temperature: 0°C to 45°C · Agency approbations: UL Listed /FCC/ RoHS/ BQB… · Warranty: 5 years

www.sunricher.com
Detection Pattern

0-10V BLE Ceiling Mounted PIR Sensor Controller

2.5m

8m

Coverage Side View
0m

2.5m/8.2ft 3.0m/10ft 3.7m/12ft

6m

4m

2m

0

2m

4m

6m

The detection area for movement sensor can be roughly divided into two parts: Slow movement (person moving < 1.0’/s or 0.3m/s) Quick movement (person moving > 1.3’/s or 0.4m/s)

Coverage Top View

8m

6m

4m

2m

0

16m

2m

4m

6m 8m
8m 6m 4m 2m 0 2m 4m 6m 8m

IC

www.sunricher.com
Warning
· DO NOT install with power applied to device · DO NOT expose the device to moisture

0-10V BLE Ceiling Mounted PIR Sensor Controller

Operation
· Do wiring according to connection diagram · Kindly refer to Silvair commissioning User Manual for further pairing · Press and hold down the “Reset” button on the controller over 5 seconds until the indicator flashes , which means it has been reset . · Available with Magnetic reset (Touch the top part of sensor for 5 seconds)

Wiring

OUTPUT

L

INPUT

N G

12/24V

V-

CV PSU

V+

V + GND NC +10V

LN

ACN ACL

LED+ LED-

DIM+ 0/1-10V Dimmable

DIM-

Driver

LED light
LED+ + LED- –

IC

www.sunricher.com
Statement

0-10V BLE Ceiling Mounted PIR Sensor Controller

FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o ffand on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna. — Increase the separation between the equipment and receiver. — Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. — Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

IC STATEMENT
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :
(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.

Update log
Date 2022-11-12

Version Update content V1.5 FCC/IC Update

Subject to change without notice.Please contact us if you have any question.

IC

Update by Romeo

References

• Intelligent Dimmable LED Driver, Controller, Dimmer For Smart Home & Building