ENSELLE SAS 12 Inch Balance Bike
Product Information
The product is a bicycle assembly kit manufactured by Gibus
Cycles. It is designed to provide a convenient and user-friendly
experience for assembling a bicycle. The kit includes various
components required for the assembly process.
Key Specifications:
- a: 5 mm
- b: 1.8 – 2.4 bar
Manufacturer: ENSELLE SAS – Gibus Cycles
Address: 143 rue Yves Lecoz, 78000 Versailles, France
Contact: +33 7 80 91 25 78
Website: gibuscycles.com
Product Usage Instructions
To assemble the bicycle using the provided kit, please follow
the steps outlined below:
- Ensure you have all the necessary components and tools from the
kit. - Refer to the assembly manual for detailed instructions and
illustrations. - Start by attaching the frame components together using the
appropriate screws and bolts. Use the provided 5 mm wrench to
tighten them securely. - Next, attach the wheels to the frame using the recommended tire
pressure of 1.8 – 2.4 bar. Use a tire pressure gauge to ensure
accurate inflation. - Attach the handlebars and ensure they are properly aligned and
tightened. - Install the seat and adjust it to your desired position.
- Check all connections and fastenings to ensure they are
secure. - Inspect the brakes, gears, and other components for proper
functionality. - Refer to the manuals and videos provided for additional
guidance, troubleshooting, and maintenance tips.
If you encounter any difficulties during the assembly process or
have any questions, please refer to the assembly manual or contact
Gibus Cycles directly for assistance.
a
5 mm
b
1,8 -2,4 bar
MANUEL D’ASSEMBLAGE ASSEMBLY MANUAL
V 1.3 – September 2022
Dessinez et partagez-nous votre création Draw & share us your artwork
#gibuscycles
ENSELLE SAS – Gibus Cycles 143 rue Yves Lecoz
78000 Versailles – France +33 7 80 91 25 78 gibuscycles.com
4 mm 5 mm
Manuals & videos
a
b
Gibus Cycles | Les draisiennes et vélos préférés des enfants
