ZD series
INTEGRATION
ZDAPV1 Volvo DSP Power Up Kit
Thank you for buying this upgrade kit. We think you will love this product and we hope that you will enjoy the extra performance this will give you!
Installation should take about 10min please mount amplifier as you see fit but we recommend it to be mounted in back of the car. No cutting off any wires just plug connectors in and load the software and you are good to GO!
PS. If you wish to give the optimal performance to the amplifier you can connect thicker cables on the +12V and GND connectors for the amp. From the battery. This will improve performance further.
| Step by step Instruction | Notes | |
| 1 | Connect multiconnector to amplifier & Connect the Yellow wire to +12 Volt and black cable to GND | 20-way black connector |
| 2 | Connect the ISO connector together firmly | These terminal can also be connected to battery and ground for better performance |
| 3 | Locate the Original amplifier under right from seat and disconnect the Original wires from the amplifier and connect the leads from the amp to the amplifier and the other end to the original connector | |
| 4 | Now start the system and upload the preferred Volvo setup file from Phoenix gold EU Website | https://phoenixgold-eu.com/downloads/ |
INSTALLATION MANUAL ZDAPV1
New Downloads/Support 1
