Big Dot Of Happiness 1 Sign And Ribbon Front Door Decor Instruction Manual

1 Sign and Ribbon Front Door Decor

Product Information

The Front Door Decor is a complete set that includes 1 sign and
ribbon. It is designed to add a decorative touch to your front door
or any desired location.

Product Usage Instructions

1. Remove the ribbon from the packaging.
2. Cut the first ribbon strip to the desired length for hanging
   the sign.
3. Cut the second and third ribbon strips into 30-inch
   lengths.
4. Take the top piece of the sign and string the first ribbon
   strip through the top hole. Tie the ends of the ribbon into a
   knot.
5. String the second ribbon strip along the back of the sign.
   Insert it into the top holes of the middle piece and through the
   bottom holes of the top piece. Tie the ribbon in a knot behind the
   top piece.
6. Using the third ribbon strip, connect the bottom piece to the
   middle piece following the same steps as in step 5. Tie the ribbon
   in a knot behind the middle piece.
7. Finally, hang the sign in your desired location.

Note: Before starting assembly, it is recommended to lay out the
three sign pieces on a flat surface in descending order to help
visualize the completed sign.

FRONT DOOR DECOR
Assembly Instructions
Includes 1 Sign and Ribbon
ASSEMBLY TIP: Lay out the 3 Sign Pieces on a flat surface in descending order to help you visualize the completed sign. The Top Piece has one pre-cut hole for hanging.
CARE TIP: For best results, display in temperatures no higher than 130ºF and hang on outermost door as placing between two doors risks exposure to excessive heat.

1 Remove Ribbon from packaging
and cut 1st Ribbon Strip to desired length for hanging Sign. Cut 2nd and 3rd Ribbon Strips into 30-inch lengths.

2 Take the Top Piece and string
1st Ribbon Strip through the
top hole. Tie Ribbon ends into
a knot.

3 Along the back of the Sign,
string 2nd Ribbon Strip into the top holes of the Middle Piece and through the bottom holes of the Top Piece.

4 Tie Ribbon in a knot behind the
Top Piece.

5 Using the 3rd Ribbon Strip,
connect the Bottom Piece to the Middle Piece in the same manner as step 3. Tie Ribbon in a knot behind the Middle Piece.

6 Hang the Sign in your desired
location.

© BIG DOT OF HAPPINESS®, LLC.