SY8833 Lena Pendant
Product Information: SY8833 Lena Pendant
The SY8833 Lena Pendant is a lighting fixture sold by
SycamoreLED.com. It is designed to be used with an E27 lamp, which
needs to be purchased separately. The pendant should be installed
by a qualified electrician in accordance with the IEE wiring
regulations and building regulations. The fixture should not be
altered in any way, otherwise, the warranty may not be valid.
For technical support or warranty information, customers can
visit the SycamoreLED.com website or call the dedicated technical
helpline at +44 (0) 113 2866686.
Product Usage Instructions
- Before commencing any work, carefully read the installation
instructions and retain them for future reference. - To prevent electrocution, switch off the power at the mains
supply before installing or maintaining the fixture. Ensure that
others cannot restore the electrical supply without your
knowledge. - The pendant requires 1 x E27 lamp, which needs to be purchased
separately. - The fixture should be installed by a qualified electrician in
accordance with the IEE wiring regulations and building
regulations. - After installation, dispose of any waste from electrical and
electronic equipment by returning it to a retailer. This is in
compliance with the WEEE Directive effective July 2006.
For any further assistance or queries, please contact
SycamoreLED.com at LS26 8XT.
Installation instructions : SY8833 Lena Pendant
(E27 Lamp purchased separate)
Thank you for purchasing this SycamoreLED.com product.
Please make sure instructions are followed carefully prior to and during installation and product is not altered, otherwise warranty may not be valid. For technical support or warranty information please visit www.sycamoreLED.com, or call our dedicated technical helpline +44 (0) 113 2866686.
IMPORTANT–Please read prior to installation
1)
Please read these instructions carefully before commencing any work
2)
Please retain these instructions for future reference
3)
This unit must be installed by a qualified electrician in accordance with the IEE wiring regulations and building regulations
4)
To prevent electrocution switch the power off at the mains supply before installing or maintaining this fitting
5)
Ensure others cannot restore the electrical supply without your knowledge
INSTALLATION INSTRUCTIONS
A
B
E
INSTALLATION INSTRUCTIONS
C
D
1 x E27 lamp required, purchased separate
CARE IN USE
· Always switch off or disconnect from the mains when cleaning the product. · We recommend cleaning with a soft dry cloth. Do not use scourers, abrasives or chemical cleaners. · Do not allow moisture to come into contact with electrical parts · This luminaire should not be disposed of with normal household rubbish. When a replacement is purchased, this luminaire
should be returned to the retailer to safely dispose of (WEEE Directive effective July 2006–Waste from Electrical & Electronic Equipment)
SycamoreLED.com LS26 8XT
Home Page - Sycamore Lighting Ltd
