Hampton Bay 400030002058 Custom Thermofoil Or Finished Wood Drawer Installation Guide (+ PDF)

Hampton Bay’s Custom Drawer Boxes & Pullouts are
high-quality products designed to enhance your home. The product
comes with a two-year warranty against defects in workmanship and
material. The natural wood used in the product allows for limited
amounts of natural characteristics of wood to show. The product is
compliant with EPA TSCA Title VI regulations for formaldehyde
emission. The product may expose you to wood dust, which is known
to the State of California to cause cancer.

Product Usage Instructions: Installation and Care Guide

Pre-installation

Before starting the installation, read all measure and
installation instructions carefully. Review the list of tools
required and understand how to use them properly. Wear protective
eyewear at all times.

Tools Required

Tape Measure
Safety Goggles
Phillips and Flat Head Screwdrivers
Drill
Cloth
Pencil
Level

Drawer Box / Pullout Assembly

Assemble the Drawer Box / Pullout according to the instructions
provided in the manual.

Drawer Box / Pullout Installation

Installing Drawer Boxes / Pullouts on Frameless Cabinets

Attach the Drawer Member to the cabinet by using screws and a
drill.
Attach the Drawer Member to the drawer by using screws and a
drill.
Slide the drawer into the cabinet until it clicks into
place.

Repeat the above steps for all drawers.

Installing Drawer Boxes / Pullouts on Face Frame Cabinets

Attach the Drawer Member to the cabinet by using screws and a
drill.
Attach the Drawer Member to the drawer by using screws and a
drill.
Slide the drawer into the cabinet until it clicks into
place.

Repeat the above steps for all drawers.

Maintenance

Care and Cleaning

Clean the product regularly with a damp cloth. Do not use
abrasive cleaners or solvents. Avoid exposing the product to
excessive heat or moisture.

If you have any questions, problems, or missing parts, call
Hampton Bay Customer Service at 1-855-HD-HAMPTON. The customer
service is available from 8 a.m. to 7 p.m. EST, Monday to Friday,
and from 9 a.m. to 6 p.m. EST, Saturday. You can also visit
homedepot.com/replacementcabinetdoors for further assistance.

View Fullscreen

INSTALLATION AND CARE GUIDE
CUSTOM DRAWER BOXES & PULLOUTS
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service
8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-855-HD-HAMPTON / HOMEDEPOT.COM/REPLACEMENTCABINETDOORS
THANK YOU We appreciate the trust and con dence you have place in Hampton Bay through the purchase of Custom Drawer Boxes & Pullouts. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of product available
for your home improvement needs. Thank you for choosing Hampton Bay!

Table of Contents
Table of Contents ……………………………………………… 2 Safety Information …………………………………………….. 2 Warranty ………………………………………………………….. 3
What is Covered ……………………………………………………………. 3 Pre-installation …………………………………………………..3
Tools required …………………………………………………… 3
Safety Information
GUIDELINES
1. Read all measure and installation instruction before starting your project.
2. Review the list of tools and understand how to properly operate all tools before use.
3. Always wear protective eyewear.

Drawer Box / Pullout Assembly ……………………………4 Drawer Box / Pullout Installation …………………………. 4
Frameless Cabinets …………………………………………….. 4 Face Frame Cabinets …………………………………………… 5 Maintenance ……………………………………………………..7 Care and Cleaning………………………………………………7
WOOD DUST WARNING
This product can expose you to chemicals including wood dust, which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
EPA TSCA TITLE VI
Products are compliant with EPA TSCA Title VI regulations for formaldehyde emission

HAMPTONBAY.COM

Please contact 1-855-HD-HAMPTON for further assistance.

Warranty
WHAT IS COVERED
Wood Products are warranted against any defect in workmanship and material for two years from the date of shipment. The beauty of natural wood does allow for limited amounts of natural characteristics of wood to show.
This guarantee does not apply to any deterioration of the Wood Product resulting from normal wear or when damages are caused by: ¨ Improper assembly and installation or exposure to the elements. ¨ Any alteration, modi cation or transformation of the product.
WHAT IS NOT COVERED
¨ Any costs incurred by the customer for nishing, removal, installation, travel or labor of any kind, nor any other product used with our products.
¨ Damages caused by improper handling, storage or installation of our product.

Pre-installation

TOOLS REQUIRED
Tape Measure

Safety Goggles

Phillips and Flat Head Scredrivers

Drill

Cloth

Pencil

Level

HAMPTONBAY.COM

Please contact 1-855-HD-HAMPTON for further assistance.

Installation
1 Assemble Drawer Box / Pullout

2 Installing Drawer Boxes / Pullouts on Frameless Cabinets
¨ Before installation, familiarize yourself with how the drawer slide operates, and how to detach and reattach the drawer member from the cabinet member. Detach members from each other using the black clip which is visible when the slide is fully extended. Reattach members by sliding drawer member into cabinet member until plastic clip clicks into place.

Front

Rear

¨ Find a clean, at work surface, and ensure that all box parts are easily within reach.
¨ Place one of the parts with dowel holes at in front of you, with the holes facing up, and the grooved side farthest from you.
¨ Squeeze a small amount of wood glue into each dowel hole.
¨ Push doweled parts into dowel holes, ensuring that all the grooves line up with each other. This should make a squared “U” shape, with three sides of the box together.
¨ Squeeze a thin bead of wood glue into the groove of the three assembled pieces, and insert the box bottom into the groove. Spread the vertical pieces just slightly while the bottom is being slid into the groove, in order to prevent the glue from being squeezed to the bottom of the grooves.
¨ Squeeze a small amount of glue into each dowel hole and groove of the remaining part, and push the remaining part onto to the assembly, lining up the dowel holes with the exposed dowels, and the groove with the box bottom.
¨ Ensure that all box joints are ush and tting snugly. Squeeze clamps (optional) may be used at the sides of the box to hold the parts together while the glue dries (approximately 15 minutes).
¨ Allow 2 hours for glue to cure before installation, and 24 hours before use.

Drawer Member (attaches to drawer)

Drawer Member (attaches to cabinet)

¨ Attach drawer members to the drawer box / pullout:
Ø Using a pencil, lightly mark a horizontal line on both sides of the box 7/8″ up from the bottom of the box.
Ø Detach a drawer member from the cabinet member, and place the drawer member along the line drawn, with the at side of the drawer member against the side of the box.
Ø With the front of the drawer member ush to the front of the box, center the attachment holes on the pencil line, and fasten the drawer member in place using screws provided.
Ø Repeat the rst two steps for the drawer member on the other side of the box.

Tip Attach using the horizontal slot holes to allow for some front/back adjustment, or the vertical slot holes to allow for some up/down adjustment.

HAMPTONBAY.COM

Please contact 1-855-HD-HAMPTON for further assistance.

Installation
Installing Drawer Boxes & Pullouts on Frameless Cabinets (continued)
Note Cabinet members for a drawer slide must be rmly installed at the same height as each other, level, and parallel to both the cabinet sides and each other. When installing drawer slides in a frameless cabinet, cabinet members are typically fastened to the sides of the cabinet, and rear brackets are not typically used. The following instructions outline one method of installation, however other installation strategies may be used, depending on individual circumstances.
¨ Attach cabinet members to the sides of the cabinet opening:
Ø On both interior side walls of the cabinet, lightly mark a level horizontal line 1″ above the bottom of each drawer box / pullout installation site in the cabinet. This line indicates the vertical position of the center of the cabinet member attachment holes.
Ø Using screws provided, attach the cabinet members to the interior side walls of the cabinet with the at side of the cabinet member against the cabinet wall, centered on the line drawn in the previous step and ush to the front face of the cabinet.
Tip Attach using the horizontal slot holes to allow for some front/back adjustment. Attach through cabinet member tabs to allow the cabinet member to adjust to proper t for drawer boxes that are slightly too narrow for the opening.

3 Installing Drawer Boxes / Pullouts on Face Frame Cabinets
¨ Before installation, familiarize yourself with how the drawer slide operates, and how to detach and reattach the drawer member from the cabinet member. Detach members from each other using the black clip which is visible when the slide is fully extended. Reattach members by sliding drawer member into cabinet member until plastic clip clicks into place.

Front

Rear

Drawer Member (attaches to drawer)

Drawer Member (attaches to cabinet)

¨ Familiarize yourself with how the rear of the drawer slide assembly ts into the rear bracket. The drawer slide slides or snaps into the longer side of the “L-shaped” rear bracket so that the at side of the cabinet member rests against the rear bracket.

¨ Slide the box into place, and push it all the way in. Ensure smooth operation of drawer box in and out. Small adjustments to cabinet member positioning may be necessary if box is not moving smoothly and easily.

Tip Attachment using the horizontal slot holes will allow for some front/back adjustment, while using the vertical slot holes will allow for some up/down adjustment

HAMPTONBAY.COM

Please contact 1-855-HD-HAMPTON for further assistance.

Installation
Installing Drawer Boxes & Pullouts on Face Frame Cabinets (continued)
Note Cabinet members for a drawer slide must be rmly installed at the same height as each other, level, and parallel to both the cabinet sides and each other. Cabinet members are typically fastened to the face frame at the front, and held up at the back using a bracket attached to the rear of the cabinet. The following instructions outline one method of this typical installation process, using the brackets included with this program. Other installation strategies may be used, depending on individual circumstances.
¨ Attach cabinet members to the sides of the cabinet opening:
Ø At each side of the face frame opening, mark a point on the inside edge of the face frame 3/8″ from the front of the face frame and 1″ from the bottom of the opening. These points indicate the location of the center of the attachment holes at the front of the cabinet members.
Ø Measure the distance from the cabinet oor to the height of the point marked in the previous step, and mark a level horizontal line at this same height on the back wall of the cabinet, roughly the length of the face frame opening width. This line indicates the center height of the horizontal-slotted attachment hole in the rear bracket.
Ø At the front of the cabinet, measure the distance from an inside cabinet wall to the nearest inside edge of the face frame opening, and add 1 1/16″ to this measurement. ¡ Measuring from the same inside cabinet wall at the back of the cabinet, mark a point on the horizontal line at the above calculated measurement. This point indicates the location of the center of the horizontalslotted attachment hole in the rear bracket.

¨ To calculate the installation location of the second rear bracket, measure the width of the face frame opening, and subtract 3 1/8″. This calculation is the center to center measurement between the horizontal-slotted attachment holes of both rear brackets.
¨ Attach a rear bracket to a cabinet member, and attach the front of this cabinet member to the inside of the face frame at the points marked in the rst step, with the at side of the cabinet member against the inside edge of the face frame, using one of the screws provided.
¨ Using one of the provided screws, attach the rear bracket to the interior back wall of the cabinet through the horizontal-slotted attachment hole at the point marked at the back wall of the cabinet.
¨ Repeat the last two steps for the opposing drawer slide in the cabinet.
¨ To ensure parallel installation of cabinet members, slightly loosen the screws in both rear brackets, and then slide the box into place. Push the box all the way in, and then back it off enough to allow access to the rear brackets. Re-tighten the rear bracket screws.
¨ Add one or two additional screws through each rear bracket for additional strength.

HAMPTONBAY.COM

Please contact 1-855-HD-HAMPTON for further assistance.

Maintenance
Solid wood does expand in warm, humid conditions which are common in spring and summer, and contracts in cold, dry conditions typical in fall and winter. Homes with solid wood products should maintain a constant humidity level of 35-50% to avoid expansion and contraction damage. The high quality top coat used has a multilayer nish application adhesion which requires a curing time of 28 days AFTER the drawer box / pullout has been unpacked and installed. ¨ DO NOT Use any abrasive material (including your ngernails) to dust off the product. ¨ DO NOT SPRAY on any liquid to clean the drawer box / pullout, simply wipe with a clean cotton cloth, dampened with warm
water only. Make sure to wipe dry right away to avoid damage to the product. ¨ DO NOT under any circumstance use multipurpose cleaner of ANY KIND as the chemicals found in them will compromise the
beautiful nish of this high quality product.
Care and Cleaning
Wood Products
As with all wood products, avoid excessive moisture on your newly installed wood products. Simply wipe with a clean cloth; do not spray on water. Use a damp 100% cotton cloth. A small amount of mild dish detergent may be used if required. Wipe dry immediately with a dry, soft cloth. This process may be repeated as often as necessary. It is recommended that you complete small areas at a time so that the moisture from the damp cloth will not remain on the wood for an extended period of time. For best results, wipe in the same direction as the wood grain, rather than across the grain or in a circular motion. Please do not use products containing ammonia, bleach, wax, or silicone, as these types of products may damage the nish on your wood products. Warm water and clean, cotton cloths are best for cleaning wood products. Everyday spills should be wiped dry immediately to avoid standing water or moisture on the wood. Do not allow wet cloths to hang against any wood product, as this could result in eventual damage to the wood or the nish.

HAMPTONBAY.COM

Please contact 1-855-HD-HAMPTON for further assistance.

Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service
8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HOMEDEPOT.COM/REPLACEMENTCABINETDOORS
Retain this manual for future use.