Koenner Soehnen KS 2100i S Inverter Generators

COMMISSIONING OF A INVERTER GENERATORS
- Please read the operating manual carefully before getting started.
- Fill the engine with motor oil for gasoline engines SAE 10W-30 or SAE 10W-40.
- Check oil level.
- Fill the fuel tank to the fuel filter level.
- Open the vent on the fuel cap to the “ON” position (fig. 1).
- Turn the Multifunctional engine switch to the “START” position (fig. 2).
- For manual start pull the manual starter until a slight resistance is felt, then pull it toward you relatively sharply. Slowly turn the manual starter by hand, do not release
it abruptly. - Turn the Multifunctional engine switch to the “RUN” position (fig. 2).

- If the generator does not start after several attempts, please contact our customer support on the website: ks-power.de.





















