Ryobi Racwdv15 Wet And Dry Vacuum Owner's Manual

RACWDV15 Wet and Dry Vacuum

Product Information:

• Model Number: RACWDV15
• Voltage: 220-240V ~ 50Hz
• Capacity: 15 l
• Weight: 3.8kg
• Filter Type: Cloth filter
• Usage: Suitable for picking up dry, nonhazardous dust and
  liquids in private sector
• Not suitable for commercial use or outdoor use
• Risk for improper use is borne solely by the user
• Proper use includes proper operation, servicing, and repairs as
  specified by the manufacturer
• Regulatory Compliance Mark (RCM)
• IPX4 Ingress Protection (Waterproof grade 4)

Product Usage Instructions:

1. Ensure the appliance is only used for picking up dry,
   nonhazardous dust and liquids in a private sector.
2. Do not use the appliance outdoors or subject it to heat, direct
   sunshine, or very high moisture (e.g., rain).
3. To install the cloth filter, place it over the filter basket
   and center it. Push down until the mounting ring of the cloth
   filter is positioned against the ribs of the top section. Ensure
   the cloth filter completely covers the filter basket. Also, ensure
   that all edges of the cloth filter are secure under the mounting
   ring.
4. To clean the cloth filter, release the clamps to remove the
   canister lid. Remove the cloth filter and wash and clean it
   carefully using lukewarm water. Dry by airing for at least 24
   hours.
5. Install the cleaned or new filter into place as instructed
   above.

RACWDV15

Cloth filter 13.
14 16
2

3

4

5

220-240V ~ 50Hz 15 l Cloth filter

15

2.18

2.5m

3.8kg

7

8

The appliance is suitable for picking up dry, nonhazardous dust and liquids.
This appliance is designed solely for use in the private sector and for the designated purpose. The appliance is not suitable for commercial use. Don’t use the appliance outdoors. Don’t subject the appliance to heat, direct sunshine or very high moisture (e.g., rain).
Any other use is considered as improper use. The manufacturer accepts no liability for any damage resulting from such use. The risk for such use is borne solely by the user.
Proper use also includes proper operation, servicing and repairs as specified by the manufacturer.

2. Place the cloth filter over the filter basket and center it. Push down until the mounting ring of the cloth filter is positioned against the ribs of the top section. Ensure the cloth filter completely covers the filter basket. Also ensure tht all edges of the cloth filter are secure under the mounting ring.
7)

cloth

13 14
9

cloth cloth
13 16

14
14
1. Release the clamps to remove the cnister lid. (Fig. 2,Fig. 3)
2. Remove the cloth filter.(Fig.15) 3. Wash and clean the cloth filter carefully by using
lukewarm water. 4. Dry by airing for at least 24 hours. 5. Install cleaned or new filter into place as instructed
above.

17 18
13
10

19 20 21

Regulatory Compliance Mark (RCM). Product meets applicable regulatory requirements.
IPX4 Ingress Protection (Waterproof grade 4)
11

12

13

14