RWDV1811 Wet and Dry Project Vacuum
Product Information
The RWDV1811 is a wet/dry vacuum designed with safety,
performance, and dependability in mind. It is suitable for wet and
dry vacuuming and blowing in workshop, household, and similar
non-industrial applications. The product can also be used for
vacuuming dust and debris directly from ONE+ power tools. Please
read the instructions in this manual carefully before assembling,
operating, and maintaining the product. Note that technical
modifications may be made to the product.
Intended Use
The wet/dry vac is intended for the following purposes:
- Wet and dry vacuuming and blowing in workshop, household, and
similar non-industrial applications. - Vacuuming dust and debris directly from ONE+ power tools.
Do not use the product for any other purpose.
Wet/Dry Vac Safety Warnings
Pay attention to the following safety warnings when using the
wet/dry vac:
- This product should not be used by individuals with reduced
physical, sensory, or mental capabilities, or lack of experience
and knowledge, unless they have been supervised or instructed by
someone responsible for their safety. - Children should be supervised to prevent them from playing with
the product. - The product is intended for household use only.
- Never vacuum materials such as hot coals, cigarette butts,
matches, etc. - Always use the product with the filter in place.
- Exercise extra caution when using the product on stairs.
- Avoid using the product to pick up hard objects like nails,
screws, coins, etc., as it may cause damage or injury. - Ensure that the battery cover is closed and locked before
use. - Avoid exposing the battery pack to rain or wet conditions.
- Remove the battery when the product is not in use or when
changing accessories. - Rechargeable batteries should be removed from the product
before charging. - Dispose of exhausted batteries safely.
- If the product will be stored unused for a long period, remove
the batteries. - Do not short-circuit the supply terminals.
Safety Warnings for Blower
When using the blower function of the product, take note of the
following safety warnings:
- Wear a face filter mask in dusty conditions to reduce the risk
of inhaling dust. - Avoid pointing the blower nozzle towards people or pets.
- Do not insert objects into the nozzle or hose.
- Operate the product away from open windows.
- In dusty conditions, slightly dampen surfaces before using the
blower function. - Avoid placing the product on top of or near loose debris to
prevent damage. - Do not operate the product if the guard, enclosure, or shields
are defective. - Exercise caution and maintain proper footing when using the
product on slopes. - Avoid touching moving hazardous parts until the product is
disconnected from the power supply/battery pack and all moving
parts have come to a complete stop. - Always wear substantial footwear and long trousers while
operating the product. - If the product is dropped, experiences heavy impact, or
vibrates abnormally, stop using it immediately and inspect for
damage or the cause of vibration. Seek repairs or replacements from
an authorized service center if necessary.
Additional Battery Safety Warnings
To ensure safety when using the tool, battery pack, or charger,
take note of the following:
- Never immerse the tool, battery pack, or charger in fluid or
allow fluid to flow inside them to prevent the risk of fire,
personal injury, and product damage due to a short circuit. - Avoid exposing the tool, battery pack, or charger to corrosive
or conductive fluids such as seawater, certain industrial
chemicals, bleach, or bleach-containing products, as they can cause
a short circuit.
For further information and instructions on assembly, operation,
and maintenance of the product, please refer to the user
manual.
RWDV1811
IMPORTANT! It is essential that you read the instructions in this manual before assembling, operating, and maintaining the product. Subject to technical modifications.
Safety, performance, and dependability have been given top priority in the design of your wet/dry vac.
INTENDED USE
The wet/dry vac is intended for wet and dry vacuuming and blowing in workshop, household and similar non-industrial applications. The product can also be used for vacuuming dust and debris directly from ONE+ power tools. Do not use the product for any other purpose.
WET/DRY VAC SAFETY WARNINGS
This product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the product by a person responsible for their safety. Children should be supervised to ensure that they do not play with the product.
The product is intended for household use only. Never vacuum materials such as hot coals, cigarette
butts, matches, etc. Do not use the product without the filter in place. Use extra care when using the product on stairs. Do not use the product to pick up hard objects such as
nails, screws, coins, etc. Damage or injury could result. Always close the battery cover and lock it in place
before use. Do not expose the battery pack to rain or wet conditions. Remove the battery when the product is not in use or when changing accessories. Rechargeable batteries are to be removed from the product before being charged. Exhausted batteries are to be removed from the product and safely disposed of. If the product is to be stored unused for a long period, the batteries should be removed. The supply terminals are not to be short-circuited.
SAFETY WARNINGS FOR BLOWER
Wear a face filter mask in dusty conditions to reduce the risk of injury associated with the inhalation of dust.
Do not point the blower nozzle in the direction of people or pets.
Never place objects inside the nozzle or hose. Do not operate the product near open windows. Slightly dampen surfaces in dusty conditions. Do not place the product on top of or near loose debris.
Debris may be sucked into intake vent resulting in possible damage to the product. Do not operate the product with defective guard, enclosure or shields. Always be sure of the footing on slopes and to walk, never run.
Do not touch moving hazardous parts before the product is disconnected from the power supply/battery pack and the moving hazardous parts have come to a complete stop.
Always wear substantial footwear and long trousers while operating the product.
If the product is dropped, suffers heavy impact or begins to vibrate abnormally, immediately stop the product and inspect for damage or identify the cause of the vibration. Any damage should be properly repaired or replaced by an authorised service centre.
ADDITIONAL BATTERY SAFETY WARNINGS
To reduce the risk of fire, personal injury, and product damage due to a short circuit, never immerse your tool, battery pack or charger in fluid or allow a fluid to flow inside them. Corrosive or conductive fluids, such as seawater, certain industrial chemicals, and bleach or bleach-containing products, etc., can cause a short circuit.
TRANSPORTING LITHIUM BATTERIES
Transport the battery in accordance with local and national provisions and regulations.
Follow all special requirements on packaging and labelling when transporting batteries by a third party. Ensure that no batteries can come in contact with other batteries or conductive materials while in transport by protecting exposed connectors with insulating, non-conductive caps or tape. Do not transport batteries that are cracked or leaking. Check with the forwarding company for further advice.
MAINTENANCE
Use only original accessories and spare parts. Should components need to be replaced which have not been described, please contact an authorised service centre. All repairs should be performed by an authorised service centre.
Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, carbon dust, etc.
Do not at any time let brake fluids, gasoline, petroleumbased products, penetrating oils, etc., come in contact with plastic parts. Chemicals can damage, weaken or destroy plastic which may result in serious personal injury.
SYMBOLS
V
Volts
W Watts
Direct current
Regulatory Compliance Mark (RCM). Product meets applicable regulatory requirements.
Please read the instructions carefully before starting the product.
2 Original Instructions
Do not dispose of waste batteries, waste electrical and electronic equipment as unsorted municipal waste. Waste batteries and waste electrical and electronic equipment must be collected separately. Waste batteries, waste accumulators, and light sources have to be removed from the equipment. Check with your local authority or retailer for recycling advice and collection point. According to local regulations, retailers may have an obligation to take back waste batteries and waste electrical and electronic equipment free of charge. Your contribution to the reuse and recycling of waste batteries and waste electrical and electronic equipment helps to reduce the demand of raw materials. Waste batteries, in particular containing lithium, and waste electrical and electronic equipment contain valuable and recyclable materials, which can adversely impact the environment and the human health if not disposed of in an environmentally compatible manner. Delete personal data from waste equipment, if any. SYMBOLS IN THIS MANUAL
Note
Parts or accessories sold separately
Original Instructions 3
4 Know your product
Utility nozzle On/off switch
Battery cover Battery port
Handle
Utility nozzle storage Flexible hose Blower port
Locking latches
Washable filter Crevice tool Power tool adaptor Operator’s manual Battery pack Charger
1
2
3
4
4
Getting started 5
1
2 3
3
4
3
5
3
4
6 Operation
1
2
3
4
3
4
Operation 7
1 2
3
3 4 5
8 Maintenance
20230323v2A
6
3
Maintenance 9
PRODUCT SPECIFICATIONS
11L Wet & Dry Project Vacuum Model Voltage Air watts Suction Air flow volume Dust storage capacity IP rating Weight – excluding battery pack Replacement parts Washable filter
RWDV1811 18 V 115 AW 13.5 kPa 1500 L/min 11 L IPX4 4.5 kg
312711008
BATTERY
Compatible battery pack (not included)
RB18L13 RB18L15 RB18L15A RB18L15B RB18L20 RB18L20A
RB18L25 RB18L25A RB18L40 RB18L40A RB18L50 RB18L50A
RB1815C RB1820C RB1825C RB1840C RB1840X RB1850C
RB1850X RB1860X
Imported by: Techtronic Industries Australia Pty Ltd 31 Gilby Road, Mount Waverley, VIC 3149 Melbourne, Australia
Techtronic Industries N.Z. Limited Unit C, 70 Business Parade South, Highbrook, Auckland 2013, New Zealand
RYOBI is a trade mark of Ryobi Limited, and is used under license.
961075765-02A
