1007457 Tank Alert I Liquid Level Alarm System
Product Information
The Easy to Install Liquid Level Alarm System is designed for
indoor use. It features a power line that reduces the possibility
of shock. The product is not UL Listed or CSA Certified.
Options
- Indoor Alarms
- Part #1007457 – Description: 120V
- Part #1009207 – Description: 120V
- Part #1003104 – Description: 120V
- Part #1003365 – Description: 120V
- Part #1002235 – Description: 120V
- Part #101-01X – Description: 120VAC no float
- Part #1008009 – Description: 230V
- Part #1003364 – Description: 230V
- Part #1005420 – Description: 230V
- Part #1005419 – Description: 230V
- Part #101-02X – Description: 230VAC no float
H = High Level, L = Low Level, X = No Float, SPKT = Splice Kit.
The master carton holds 16 boxed units. The shipping weight of each
unit is either 3.58 lbs or 2.14 lbs.
Control Switch Options
The control switch options are not specified in the provided
text.
Specifications
- Voltage for 120 VAC Model:
- Primary: 120 VAC, 50/60 Hz, 5 watts max. (alarm condition)
- Secondary: 12 VAC
- Voltage for 230 VAC Model (not UL Listed or CSA Certified):
- Primary: 230 VAC, 50/60 Hz, 5 watts max. (alarm condition)
- Secondary: 12 VAC
- Alarm Enclosure: 6 x 4 x 2.5 inch (15.24 x 10.16 x 6.35 cm),
NEMA 1 metal - Alarm Horn: 86 decibels at 10 feet (3 meters)
- Power Cord: 6 foot (1.8 meter)
- Float Switch Connection Terminal: For float switch connection
only. Do not apply power. (Voltage across terminals is 12
VAC.) - Cable: 15 feet (4.57 meters), flexible 18 gauge, 2 conductor
(UL) SJOW, water-resistant (CPE) - Maximum Water Depth: 30 feet (9 meters), 13 psi
- Electrical: 5 amps, 125 VAC/250 VAC, 50/60 Hz
Product Usage Instructions
Note: Before proceeding with the installation
and usage of the Easy to Install Liquid Level Alarm System, please
read the user manual thoroughly.
- Ensure that the power line is connected properly to reduce the
possibility of shock. - Choose the appropriate indoor alarm option based on your
requirements. - If required, select the control switch options as per your
needs. - Refer to the specifications for the voltage details based on
the model you have. - Install the alarm enclosure, ensuring it meets the dimensions
specified (6 x 4 x 2.5 inch) and is made of NEMA 1 metal. - Connect the float switch to the designated terminal, making
sure not to apply power. The voltage across the terminals should be
12 VAC. - Use the provided cable (15 feet long) to connect the alarm
system. Ensure it is flexible, 18 gauge, and has 2 conductors. The
cable should be water-resistant (CPE) and comply with UL
standards. - Consider the maximum water depth (30 feet) and pressure (13
psi) when installing the system. - Connect the power cord, which is 6 feet long, to a suitable
power source. - Test the alarm horn, which produces a sound of 86 decibels at a
distance of 10 feet (3 meters).
If you encounter any issues or require further assistance,
please refer to the user manual or contact our customer
support.
TANK ALERT® I ALARM SYSTEM
Easy to Install Liquid Level Alarm System for Indoor Use
This alarm system monitors liquid levels in lift pump chambers, sump pump basins, holding tanks, sewage, agricultural, and other water applications. The Tank Alert® I alarm system can serve as a high or low level alarm depending on the float switch model used. The alarm horn sounds when a potentially threatening liquid level condition occurs. The horn can be silenced, but the warning light remains on until the condition is remedied. A green “power on” light indicates power to the alarm panel.
FEATURES
· NEMA 1 enclosure, designed for ease of installation, rated for indoor use · Red “alarm” light, green “power on” light, alarm “test” switch, and horn
“silence” switch · Alarm horn sounds at 86 decibels at 10 feet (3 meters) · Can be used with any UL Listed / Recognized switching mechanism
rated to include 1 amp, 12 VAC load · Alarm system (when installed on separate circuit) operates even if the
pump circuit fails · Switching mechanism operates on low voltage and is isolated from the
power line to reduce the possibility of shock
OPTIONS
When ordered with the alarm, this system is available with: · Alternate float switch models for high or low level warning · 120 VAC primary voltage or 230 VAC primary voltage (230 VAC model is
not UL Listed or CSA Certified)
Indoor Alarms
9500095I Rev 01/23 © 2020 SJE, Inc. All Rights Reserved. SJE Rhombus is a trademark of SJE, Inc.
www.sjerhombus.com · Toll Free 888-342-5753
D.11
TANK ALERT® I – Easy-to-install liquid level alarm system for indoor use.
Part #
Description (120V)
1007457
101-01H (120 VAC w/15′ SJE SignalMaster® High Level)
1009207
101-01HSPKT (120 VAC w/15′ SJE SignalMaster® High Level) with splice kit
1003104
101-01H (120 VAC w/15′ Sensor Float® High Level)
1003365
101-01L (120 VAC w/15′ Sensor Float® Low Level)
1002235
101-01X (120 VAC no float)
Part #
Description (230V)
1008009
101-02H (230 VAC w/15′ SJE SignalMaster® High Level)
1003364
101-02H (230 VAC w/15′ Sensor Float® High Level)
1005420
101-02L (230 VAC w/15′ Sensor Float® Low Level)
1005419
101-02X (230 VAC no float)
H = High Level L = Low Level X = No Float SPKT = Splice Kit MASTER CARTON holds 16 boxed units.
Shipping Weight 3.58 lbs 3.58 lbs. 3.58 lbs. 3.58 lbs. 2.14 lbs.
Shipping Weight 3.58 lbs. 3.58 lbs. 3.58 lbs. 2.14 lbs.
CONTROL SWITCH OPTIONS
The Tank Alert® I alarm system comes standard with a 15 foot SJE SignalMaster® control switch with mounting clamp. Other float switches are available. See control switch section of the catalog. To determine the price of alarm with an alternate float, add the price of the part number with “no float” to the price of the float switch.
SPECIFICATIONS
VOLTAGE FOR 120 VAC MODEL: PRIMARY: 120 VAC, 50/60 Hz, 5 watts max. (alarm condition) SECONDARY: 12 VAC
VOLTAGE FOR 230 VAC MODEL (not UL Listed or CSA Certified): PRIMARY: 230 VAC, 50/60 Hz, 5 watts max. (alarm condition) SECONDARY: 12 VAC
ALARM ENCLOSURE: 6 x 4 x 2.5 inch (15.24 x 10.16 x 6.35 cm), NEMA 1 metal
ALARM HORN: 86 decibels at 10 feet (3 meters) POWER CORD: 6 foot (1.8 meter)
FLOAT SWITCH CONNECTION TERMINAL: For float switch connection only. Do not apply power. (Voltage across terminals is 12 VAC.)
FLOAT SWITCH: SJE SignalMaster® control switch with mounting clamp
CABLE: 15 feet (4.57 meters), flexible 18 gauge, 2 conductor (UL) SJOW, water-resistant (CPE)
FLOAT: 2.74 inch diameter x 4.83 inch long (7 cm x 12.3 cm), high impact, corrosion resistant polypropylene housing for use in sewage and non-potable water up to 140°F (60°C)
MAXIMUM WATER DEPTH: 30 feet (9 meters), 13 psi
ELECTRICAL: 5 amps, 125 VAC/250 VAC, 50/60 Hz
Indoor Alarms
D.12
www.sjerhombus.com · email: [email protected] SEE PRICE BOOK FOR PRICING.
Home - SJE Rhombus Control Products
