PAS-30AC Portable Utility Pump
Product Information
The Portable Utility Pump is a water pump designed to operate on
110-120 Volt, 60Hz exclusively. It comes with an impeller, carbon
brush, suction attachment, 6 ft inlet pipe, and an instruction
manual. The pump is designed to pump fresh water and is not
suitable for water containing large bits of debris. The pump needs
to be oiled before operating.
Product Usage Instructions
- Read the user manual carefully before operating the pump.
- Ensure that the work area where you intend to use the pump is
clear of clutter and well-lit. Also, make sure that the pump is in
a location where it will not be submerged or in contact with
external water. - Connect a standard garden hose to both the inlet and outlet of
the pump. If using another hose than the provided short hose for
the inlet connect, then ensure that the supplied inlet hose is less
than 25′ long and less than 10′ above the water source. - Connect the pump to 120 Volt, 60 Hz AC only using a three-prong
plug. - Before operating, pour 1/2 tablespoon of food-grade vegetable
oil into the inlet of the pump to provide the necessary lubrication
to the impeller.
Troubleshooting
Problem: Pump will not start
Possible Cause: No power or cord not connected
Problem: Pump is on, but no water is flowing
Possible Cause: Inlet or outlet hose is clogged or
kinked
Problem: Pump stops with a warning
Possible Cause: The pump has overheated, and the thermal
protection has been activated. Wait for the pump to cool down
before restarting.
Problem: Pump leaks
Possible Cause: The pump’s seals are damaged. Contact
customer service for assistance.
Support and E-Warranty Certificate https://www.vevor.com/support
PORTABLE UTILITY PUMP USR MANUAL
Applicable model: PAS-30AC
We continue to be committed to provide you tools with competitive price. “Save Half”, “Half Price” or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and doses not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.
Portable Utility Pump
NEED HELP? CONTACT US! Have product questions? Need technical support? Please feel free to contact us:
[email protected] This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.
1
USAGE GUIDE NOTE: This Water Pump has been designed to operate on 110-120 Volt, 60Hz exclusively. Using any other voltage or Hz adversely affects performance. IMPORTANT: Keep this guide for future reference. CAUTION:Be sure to review SAFETY INSTRUCTIONS FIRST PERTAINING TO A RISK OF FIRE, ELECTRICAL SHOCK, OR INJURY TO PERSONS before using the pump.
TOOLS AND MATERIALS YOU MAY NEED ·Standard hose for the outlet. A small hose is provided for the inlet. ·PTFE tape. Sometimes this is referred to as ‘plumber’s tape.’
2
PACKAGE CONTENTS
Item Portable Utility Pump Impeller Carbon Brush Suction Attachment 6 ft Inlet Pipe Instruction Manual
Quantity 1 1 1 1 1 1
SITE PREPARATION CLEANING AND MAINTENANCE
Make sure your work area where you intend to use the pump is clear of clutter and well-lit. Also, ensure that the pump is in a location where it will not be submerged or in contact with external water. The pump is designed to pump fresh water, so please make sure that the water source does not contain large bits of debris.
IMPORTANT SAFETY INSTRUCTIONS
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS. SAVE THESE INSTRUCTIONS. WARNING – When using electrical pumps, basic precautions should always be followed, including the following: 1.Read all instructions before using the pump. 2.To reduce the risk of injury, close supervision is recommended at all times that the pump is in operation. 3.Do not put your fingers or hands into a water pump inlet our outlet when operating. 4.Unplug the power before attempting to move the pump. 5.For proper grounding instructions, see the ELECTRICAL CONNECTION portion of this manual.
3
WATER AND ELECTRICAL CONNECTIONS
HOSE CONNECTIONS Connect a standard garden hose to both the inlet and outlet of the pump. If using another hose than the provided short hose for the inlet connect, then ensure that the supplied inlet hose is less than 25′ long and less than 10′ above the water source. Note: Keep the hoses as straight as possible, which will improve the pump’s efficiency.
GROUNDING INSTRUCTIONS THE WATER PUMP IS EQUIPPED WITH A GROUNDED PLUG-IN POWER CORD. This pump must be grounded. In the event of a malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This pump is equipped with a cord having an equipment grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
ELECTRICAL CONNECTIONS A.Connect the pump to 120 Volt, 60 Hz AC only. B.Use a three-prong plug. See the figure below:
4
3-Prong Plug and Outlet CAUTION: Do not allow the pump, electrical cord, or electrical outlet to come into contact with water. This may result in serious injury. If unsure how to install or use this pump, consult a licensed electrician.
OPERATING INSTRUCTIONS
PUMP PREPARATION Before operating, the pump needs to be oiled. Pour 1/2 tablespoon of food-grade vegetable oil into the inlet of the pump. This should provide the necessary lubrication to the impeller.
OPERATION The following are the steps for the operation 1.After oiling the pump, make sure the inlet and outlet hoses are firmly attached. 2.Verify that the pump is placed in a safe area and will not be submerged or come in contact with a water source. 3.Check that the inlet hose is submerged and connected to a water source. 4.Make sure the end of the outlet hose is connected correctly. 5.Carefully plug the pump into a 3-wire, 120 Volt, 60 Hz, grounded A.C. Outlet to begin operation. 6.The pump is self-priming, and water should begin to flow for 30 seconds
5
or less. a.If water does not flow, unplug the pump and check the connection and setup. b.Operating the pump without water for an extended period may damage the pump and cause it to fail. 7.Once pumping has been completed, unplug the pump. The pump may become hot during operation. Be careful we working near or touching the pump. CAUTION: Water and electricity do not mix. Make sure continuously check that the power connections and cables are not in contact with water. Consult an electrician if you have any questions or concerns about the electrical circuit or pump operations.
TROUBLESHOOTING
Problem
Pump will not start Pump is on, but no water is flowing
Pump stops with a warning
Pump leaks
Possible Causes
1. No power or cord not connected
1.Pump not oiled 2.Inlet hose is too long 3.Hoses kinked
1.No water to pump 2.Pump has overheated, and thermal overload has tripped 3.Hoses have become kinked
1.Hose O-rings missing
Possible Solutions
1. Check outlet power or plug in the pump 1.Oil pump through the inlet 2.Shorten the inlet hose 3.Straighten out the hoses
1.Check the inlet water supply 2.Unplug and let the pump cool 3.Straighten out hoses
1.Remove inlet and outlet hoses and reinstall
6
SPECIFICATIONS Voltage/Frequency: Single Phase 120V-60Hz. Current: 2.3A Power: 1/10 HP. Maximum Flow: 360GPH. Maximum Head Lift: 46 ft. Inlet/Outlet Diameter: GHT3/4. 18AWG power cord, 6′ long.
REFERENCE PARTS LIST
7
Number 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
List of Explosion Plans
Item pan head screws
end cover seal washer
impeller pan head screws easy-carry handle
pump head oil seal wool felt
check ring rubber ring electric machinery cable and plug brush cap brush spring
brush foot pad bottom seat foot pad pan head screws serrated gasket baseboard suction attachment water pipe
Quantity 4 1 1 1 2 1 1 1 1 1 1 1 1 2 2 2 4 1 4 2 2 1 1 6 ft
8
*There are any minor changes to the numbers included in the user manual without prior notice. Manufacturer: Ningbo Rising Mechanical & Electric Co., Ltd. Add.: No.16 Huapu Road, QiJiashan, Beilun Zone, Ningbo City, Zhejiang, 315800, P.R. China.
9
Support and E-Warranty Certificate https://www.vevor.com/support
vevor.com/support
