Hartmobility Tlsg620 Titan Links With Safetygrip Instruction Manual (+ PDF)

If you have any questions or need assistance, please contact
Customer Care at [email protected]. For warranty details, visit
https://SafetyGrip.com/customer-care/#warranty.

Kit Contents

TITAN-LINK 72 HANDRAIL KIT (TLSG620) – Tools Included
TITAN-LINK 36 HANDRAIL KIT (TLSG625) – Tools Included

Installation

The installation instructions are divided into two parts: Part A
– Installing a handrail between two Titan Poles, and Part B –
Installing a handrail between a wall and a Titan Pole using a
Titan-Link Wall Mount Bracket.

Part A – Installing A Handrail Between Two Titan Poles

STEP 1: Prior Installation

Before installing the handrail, ensure that the two Titan Poles
are already installed. Follow the installation instructions
provided with the Titan Poles. If you are using the Titan-Link 36
(91.5cm) Handrail, install the Titan Poles 36″ (91.5cm) apart. If
you are using the Titan-Link 72 (183cm) Handrail, install the Titan
Poles 72″ (183cm) apart.

STEP 2: Attach the Handrail End Clamps to the
Poles

Attach the Handrail End Clamps to both Titan Poles.

STEP 3: Install The Handrail Between The
Clamps

Place the Handrail between the Clamps and fit the parts (Items
3, 4 & 8). Tighten the screws with the provided hex keys.

Part B – Installing A Handrail Between A Wall And A Titan Pole
Using A Titan-Link Wall Mount Bracket

STEP 1: Prior Installation

Before installing the handrail, make sure to install the TLSG680
Wall Mount Bracket and the Titan Pole according to their respective
installation instructions. If you are using the Titan-Link 36
(91.5cm) TLSG625 Handrail, install the Titan Pole 38″ (96.5cm) from
the wall. If you are using the Titan-Link 72 (183cm) TLSG620
Handrail, install the Titan Poles 72″ (188cm) from the wall.

STEP 2: Attach the Handrail End Clamps to the
Wall Mount Bracket and the Titan Pole

Attach the Handrail End Clamps to both the Wall Mount Bracket
and the Titan Pole.

STEP 3: Install The Handrail Between The
Clamps

Put the Handrail between the Clamps and fit the parts (Items 3,
4 & 8). Tighten the screws with the provided hex keys.

Maintenance and Cleaning

To ensure proper usage, it is recommended to check and tighten
the screws in the handrail end clamps as necessary on a weekly
basis.

Limited Warranty

Hartmobility Inc. provides a limited lifetime parts warranty for
their products. This warranty covers defects in design and
workmanship. Hartmobility Inc. will rectify any defects in parts or
workmanship at no charge.

The warranty does not cover product failure due to installation
error, owner misuse, abuse, negligence, or normal wear and tear.
For more information on what the Limited Lifetime Warranty covers
and does not cover, please visit the Hartmobility Inc. website at
www.Hartmobility.com.

View Fullscreen

Assembly/Installation Instructions
TITAN LINK with SafetyGrip®
TLSG620 & TLSG625

Safety Information
IMPORTANT: If you are unsure that you can install this product correctly, hire a qualified professional.

Tools Required
· Tape Measure · Pencil

If you have any questions, please contact Customer Care at:[email protected]. For warranty details, please visit https://SafetyGrip.com/customer-care/#warranty.

KIT CONTENTS
TITAN-LINK 72 HANDRAIL KIT
Tools Included TITAN-LINK 36 HANDRAIL KIT
Tools Included
Page 2 | TITAN LINK with SafetyGrip® TLSG620 & TLSG625

PRODUCT INFORMATION
· The Titan-Link Handrails are designed to assist with exercise, balance, positioning and stability support for persons weighing up to 350lbs (158kg). They are not designed or intended to take the full weight of the user.
· This Titan-Link Handrail assembly comes with our patented Interlocking SafetyGrip®. · This Titan-Link Handrail assembly is protected with AlphaSan® technology, which provides lasting protection
against microbial contamination.
INSTALLATION
These INSTALLATION INSTRUCTIONS are separated into 2 parts: PART A – Installing a handrail between two Titan Poles. PART B – Installing a handrail between the wall using a TLFM680 Wall Mount Bracket and a Titan Pole.
PART A – Installing A Handrail Between Two Titan Poles STEP 1: Prior Installation
Before installing the Handrail, the two Titan Poles must be installed. Follow the INSTALLATION INSTRUCTIONS provided with these Titan Poles. If using Titan-Link 36″ (91.5cm) Handrail, install the Titan Poles 36″ (91.5cm) apart. (see Illustration 1) If using the Titan-Link 72″ (183cm) Handrail, install the Titan Poles 72″ (183cm) apart. (see Illustration 1)
www.SafetyGrip.com | Page 3

STEP 2: Attach the Handrail End Clamps to the Poles
Remove all the screws, nuts and parts, Items 1, 2, 3, 4 & 8, from the handrail end clamps and separate the clamps, see the Exploded View on the Parts List. Use the hex keys provided. Mount a handrail end clamp set to each of the Titan Poles at a height of 34″ (86cm) from the floor to the center of the Handrail. (See Illustration 1) Make sure that the handrail end clamps are oriented in the correct position. (See Illustration 1) Fit the 4 screws and nuts Items 1 & 2 back into the handrail end clamps and tighten with the hex keys.
STEP 3: Install The Handrail Between The Clamps
Put the Handrail between the Clamps and fit the parts, Items 3, 4 & 8. Tighten with the hex keys.
Page 4 | TITAN LINK with SafetyGrip® TLSG620 & TLSG625

PART B – Installing A Handrail Between A Wall And A Titan Pole Using A Titan-Link Wall Mount Bracket STEP 1: Prior Installation
Before installing the Handrail, the TLSG680 Wall Mount Bracket and the Titan Pole must be installed. Follow the INSTALLATION INSTRUCTIONS provided with each of these products. If using the Titan-Link 36″ (91.5cm) TLSG625 Handrail, install the Titan Pole 38″ (96.5cm) from the wall. (see Illustration 2) If using the Titan-Link 72″ (183cm) TLSG620 Handrail, install the Titan Poles 72″ (188cm) from the wall. (see Illustration 1)
www.SafetyGrip.com | Page 5

STEP 2: Attach the Handrail End Clamps to the Wall Mount Bracket and the Titan Pole
Remove all the screws, nuts and parts, Items 1, 2, 3, 4 & 8, from the handrail end clamps and separate them, see the Exploded View on the Parts List. Use the hex keys provided. Mount one handrail end clamp set onto the TITAN-LINK Wall Mount Bracket. Make sure that the clamps for the handrail are in the correct position. (see Illustration 2) Fit the 4 screws and nuts Items 1 & 2 into the Pole Clamps and tighten with the hex keys. Mount a handrail end clamp set to the Titan Pole at a height of 34″ (86cm) from the floor to the center of the Handrail. (See Illustration 1) Make sure that the handrail end clamps are oriented in the correct position. (See Illustration 1) Fit the 4 screws and nuts Items 1 & 2 back into the handrail end clamps and tighten with the hex keys.
STEP 3: Install The Handrail Between The Clamps
Put the Handrail between the Clamps and fit the parts Items 3, 4 & 8. Tighten with the hex keys.

MAINTENANCE AND CLEANING

The Titan-Link Handrail can loosen with use. The screws in the handrail end clamps should be checked and

tightened as necessary weekly.

LIMITED WARRANTY
Hartmobility Inc. product(s) are covered by a limited lifetime parts warranty. This warranty covers against defects in design and workmanship. Hartmobility Inc. will correct any defects in parts or workmanship at no charge.
The warranty does not cover product failure due to installation error, owner misuse, abuse, negligence or normal wear and tear.
For more information on what our Limited Lifetime Warranty covers and does not cover, please visit the Hartmobility Inc. website at www.Hartmobility.com or scan the following QR Code.

Page 6 | TITAN LINK with SafetyGrip® TLSG620 & TLSG625

www.SafetyGrip.com | Page 7