PROBE T
Smart Wireless Thermometer
PROBE T Smart Wireless Thermometer
Thank you for choosing PROBE T ! Only a few steps away to use the PROBE T for cook.
Get Started
Charge PROBE T for 5-10 Minutes
Download the PROBE T App
IOS Android
Apple store / Google Play
Launch the PROBE T APP
Remove the PROBE T probe from the charger to turn it on
Follow the App instructions to pail the PROBE T probe for the first time
Charger LED Status Indicator
- Solid Green: Full Charge
- Solid Red: In the charging
Notice No Power Switch The power is constantly consumed. Please charge the probe before use.
Specification
| Supported Devices : | IOS and Android System |
| APP Name: | PROBE T |
| Connection Way: | Bluetooth |
| Wireless Connection Distance: | Over 100 Ft (30 M) |
| Probe Waterproof Grade: | IPX7 |
| Temp Reading Frequency: | 1 Second/time |
| Temp Measurement Range: | 32-212°F (0-100 °C) |
| Charging Time: | 5-10 Mins |
| Full Power usage time: | 4 hours |
| Charging Method: | Charging stand (USB-Type C) |
Warnings
- PROBE T is designed for use in meat(food).
- The charger block is non-waterproof, do not immerse it in water or other liquids.
- To avoid damage to PROBE T, insertion of the probe in the meat past the Safety Notch in necessary.
- Do not use PROBE T probes in a microware or pressure cooker.
- PROBE T probes are not dishwasher safe. Please hand wash with soap and water before and after each use.
- PROBE T is water resistant, not fully waterproof, do not submerge in water for long periods of time. –
- Please take caution with the pointed tip of the probe.
- Probe will be very hot during or just after a cook. Do not touch with bare hands.
- Do not submerge the PROBE T probe in cold water after cooking. Wait until it has cooled down prior to washing.
- PROBE T is not a toy, please keep it away from children.
- The internal sensor max is 212 °F (100 °C). Temp above the maxi-mum may potentially damage PROBE T
- When cooking, ensure any part of the probe is not touching any HOT cooking surface.
- When not in use, store PROBE T in a dry and cool place.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interf-erence, and
- this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party respon-sible for compliance could void the users authority to operate the equipm-ent.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These lim-its are designed to provide reasonable protection against harmful interfere-nce in a residential installation. This equipment generates uses and can rad-iate radio frequency energy and, if not installed and used in accordance wi-th the instructions, may cause harmful interference to radio communicatio-ns. However, there is no guarantee that interference will not occur in a par-ticular installation. If this equipment does cause harmful interference to ra-dio or television reception, which can be determined by turning the equip-ment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
*RF Exposure information: The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
