Phoebe Led Keto Led Emergency High Bay Instruction Manual

• Waste electrical products should not be disposed of with
  household waste. Please recycle where facilities exist. Check with
  your Local Authority or retailer for recycling advice.

1. Switch off power.
2. Attach suspension loop and secure with security bolt.
3. Attach Keto High Bay via mounting ring to mount surface using
   wire, chain, hook, or other suitable method.
4. For outdoor or damp environments, make a 240V mains cable
   connection with a suitable IP65 junction box.
5. Connect to mains using the pre-wired input cable according to
   current wiring regulations (refer to diagrams).
6. Ensure a minimum distance from the luminaire to lighted
   objects.
7. Turn on power. Installation is complete.

Note: Images are for information only. Phoebe LED shall not
be held liable for improper operation of the luminaire in
circumstances where procedures and specifications have not been
followed correctly. Crompton Lamps Limited 2021.

Contact Information:

Tel: +44 (0)1274 657 088

Fax: +44 (0)1274 657 087

Web: www.cromptonlamps.com

IP65 IK10

This instruction sheet is relevant to Phoebe Keto integrated LED high bay.

THANK YOU for buying this PHOEBE LED product. To help ensure this luminaire gives complete satisfaction please only use it according to the following instructions, and then pass the instructions to the appropriate person for retention and future reference.

Warning
1. Installation only to be carried out by a qualified electrician 2. Must be installed on a heavy duty structure capable of withstanding 3x weight of the unit 3. Use suitable mounting fixtures that will securely anchor the unit to your surface 4. 240V mains cable connection should be made with a suitable IP65 junction box 5. Phoebe LED recommends the use of a D-type circuit breaker for protection of this unit 6. Do not operate if product is damaged

Environmental Protection
Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice.

D
Emergency Module
293mm

Dimensions (mm)

Standard Emergency Power Beam Colour

Weight

code code (W) Angle Temp (K)

D

H

(kg)

12431 15029 100 90º 4000 ø275 166

2

12448 15036 150 90º 4000 ø285 166

2.3

12455 15043 200 90º 4000 ø305 183

3

12462 15050 100 60º 4000 ø275 166

2

12479 15067 150 60º 4000 ø285 166

2.3

12486 15074 200 60º 4000 ø305 183

3

a. Switch off power b. Attach suspension loop and secure with
security bolt

a. Attach Keto High Bay via mounting ring to mount surface using wire, chain, hook or other suitable method

93x61mm Emergency
Kit

a. 240V mains cable connection should be made with a suitable IP65 junction box when using outdoors or damp environment
b. Connect to mains using the pre-wired input cable according to current wiring regulations (see diagrams)

Emergency Wiring Diagram

LN L-SW L N

10A
Brown: L Blue: N Yellow and Green:

To 240V Mains
Phoebe LED recommends the use of a D-type circuit breaker for protection of this unit

a. 240V mains cable connection should be made with a suitable IP65 junction box when using outdoors or damp environment
b. Connect to mains using the pre-wired input cable according to current wiring regulations (see diagram)
AC Input (3pin)

4 a. Ensure minimum distance from luminaire to lighted objects b. Turn on power, Installation complete

DC Output (2pin) LED Board (2pin)

Images are for information only. Phoebe LED shall not be held liable for improper operation of the luminaire in circumstances where procedures and specifications have not been followed correctly. Crompton Lamps Limited 2021.
Tel: +44 (0)1274 657 088 Fax: +44 (0)1274 657 087 Web: www.cromptonlamps.com

References

• Home Page - Crompton Lamps Ltd