Uline H-9503 Tork Xpressnap Fit Tabletop Napkin Dispenser User Guide

H-9503 Tork Xpressnap Fit Tabletop Napkin Dispenser

1-800-295-5510
uline.com

LOADING

NOTE: Use dispenser with Tork Xpressnap Fit® napkins (S-24380 and S-24381) only. Universal napkins will not dispense effectively from dispenser.

1. To open dispenser, place hand on top of dispenser and thumb under lip on front of dispenser. (See Figure 1)
   
2. Slightly squeeze lid (from the front and back) and press thumb in under lip on front of dispenser. (See Figure1)
3. While squeezing, the latches will slightly release. Pull up on lip to open lid. (See Figure 1)
   
4. Load napkins into dispenser. (See Figure 2)
   NOTE: Dispenser holds up to 336 Max napkins at a time. Do not overfill past fill line. (See Figure 3)
   
5. Push napkins down until dispenser clicks before closing lid. (See Figure 4)
6. Begin dispensing. (See Figure 5)
   

AD-A-GLANCE® FEATURE

1. To use Ad-a-Glance® feature, open dispenser. (See Figure 6)
   
2. Pull out cards in each side of dispenser. (See Figure 7)
   
3. Use templates at adaglance.torkusa.com to design artwork. Ad-a-Glance® insert size is 2.9 x 3.9″.
4. Insert customized artwork into dispenser and close door. (See Figure 8)

CLEANING
Wipe with cloth using soap and water. If necessary, use mild cleaners. Do not use abrasives. Dispenser is not dishwasher safe.