Uline H-3454 Stainless Steel Wall Mount Sanitary Napkin Receptacle Instruction Manual

ULINE H-3454 Stainless Steel Wall Mount Sanitary Napkin Receptacle

TOOLS NEEDED

MOUNTING INSTRUCTIONS

NOTE: Mounting hardware is not included with this item. Ensure that proper mounting hardware is used for appropriate wall composition.
NOTE: Recommended mounting height is approximately equal to toilet tissue dispenser.

1. Hold up receptacle to desired location and mark two holes on wall where screws will be inserted. (See Figure 1)
   
2. Drill into wall at two marked locations with appropriate-sized drill bit. Insert wall anchors if necessary.
3. Hold receptacle over previously drilled holes and insert screws.

LINER LOADING INSTRUCTIONS

1. Open top of receptacle.
2. Place an open liner (S-15960) down into receptacle.

LINER REMOVAL INSTRUCTIONS

1. Open top of receptacle. (See Figure 2)
   
2. Carefully pinch both sides of the liner and pull up.
   Dispose of liner into a trash container.

1-800-295-5510
uline.ca