CA-100162 Calla Pendant
Product Information: Calla Pendant, Medium
The Calla Pendant, Medium is a lighting fixture that comes with
a backplate, mounting screws, wago clips, flora diffuser, tool and
washer, G9 LED bulb, Calla shade, and canopy with stem. It is
designed to be installed on a junction box in the wall or ceiling
and requires a standard wire stripper and Phillips head screwdriver
for installation. The fixture has a socket for the G9 LED bulb and
a diffuser to cover the bulb.
CAUTION: Electrical shock risk. Turn off electrical power at the
main fuse box or circuit panel before beginning installation,
servicing the light, or installing accessories. We recommend
working with a qualified electrician familiar with the type of work
you’d like done.
Product Usage Instructions
- Before beginning installation, check that you have received all
of the components listed above. If anything is missing, contact
customer support. - Turn off the electrical power source at the main fuse box or
circuit panel. - Mount the backplate (Part A) to the junction box using a
Phillips head screwdriver to tighten the mounting screws (Part
B). - Gently slide the canopy cover down the stem (Part H).
- Use the wago clips (Part C) to connect the fixture’s wires to
the corresponding wires from the junction box in the wall or
ceiling. White is neutral, black is live, and green/yellow is
ground. One ground wire will be attached to the backplate (Part A),
and the other ground wire should come from the junction box. If
needed, use a wire stripper to remove 3/8 of the insulation from
each wire before inserting them into the corresponding wago
clip. - Mount the canopy base on the stem (Part H) into the backplate
using a Phillips head screwdriver to tighten mounting screws (Part
B). - Gently slide the canopy cover back up the stem (Part H). Rotate
the canopy cover clockwise to secure firmly in place. - Carefully align the socket with the hole in the shade (Part G),
and slide the shade up. With one person holding the shade in place,
use the included tool and washer (Part E) to thread and tighten the
shade to the stem (Part H). - Push the included bulb (Part F) into the socket.
- Thread the diffuser (Part D) over the bulb.
- Turn the power back on at the main fuse box or circuit
panel.
Calla Pendant, Medium
How to Install Your New Light Please check that you received all of the components pictured in this guide. Reach out to us if anything is missing. It’s very rare, but it happens. Don’t forget to turn off the electrical power source.
Tools you will need that aren’t included: standard wire stripper, Phillips head screwdriver.
CAUTION Electrical shock risk. Turn off electrical power at the main fuse box or circuit panel before beginning installation, servicing the light, or installing accessories. We recommend working with a qualified electrician familiar with the type of work you’d like done.
ATTENTION Risque de choc électrique. Coupez l’alimentation électrique au niveau de la boîte à fusibles principale ou du panneau de circuits avant de commencer l’installation, l’entretien de la lumière ou l’installation d’accessoires. Nous vous recommandons de travailler avec un électricien qualifié familier avec le type de travail que vous souhaitez effectuer.
Contents
Part A Backplate
Part B Mounting Screws (x4)
Part C Wago Clips (x3)
Part D Flora Diffuser
Part E Tool + Washer
Part F G9 LED Bulb
Part G Calla Shade
Part H Canopy + Stem
Assembly Guide
1 of 4
incommonwith.com
Calla Pendant, Medium
Step 1: Turn off electrical power at the main fuse box or circuit panel before beginning installation.
Step 2: Mount the backplate (A) to the junction box using a phillips head screwdriver to tighten the mounting screws (B).
!
Step 3: Gently slide the canopy cover down the stem (H).
H
A
B
Step 4: Use the wago clips (C) to connect the fixture’s wires to the corresponding wires from the junction box in the wall or ceiling. White is neutral; Black is live; Green/ Yellow is ground. One ground wire will be attached to the backplate (A), the other ground wire should come from the junction box. If needed use a wire stripper to remove 3/8″ of the insulation from each wire before inserting them into the corresponding wago clip.
A
C
Assembly Guide
2 of 4
incommonwith.com
Calla Pendant, Medium
Step 5: Mount canopy base on the stem (H) into the backplate using a phillips head screwdriver to tighten mounting screws (B).
Step 6: Gently slide the canopy cover back up the stem (H). Rotate the canopy cover clockwise to secure firmly in place.
H H
B
Step 7: Carefully align the socket with the hole in the shade, and slide the shade up. With one person holding the shade (G) in place, use the included tool (E) to thread the washer, tightening the shade to the stem (H).
H
E
Step 8: Push included bulb into socket (F).
G E
F
Assembly Guide
3 of 4
incommonwith.com
Calla Pendant, Medium
Step 9: Thread the diffuser over the bulb (D). Turn the power back on at the main fuse box or circuit panel you disabled before installation.
D
Assembly Guide
4 of 4
incommonwith.com
In Common With
