CHA8970 Ring Form Large Table Lamp
Product Information
The Ring Form Large Table Lamp is a stylish and functional
lighting fixture designed to enhance the ambiance of your living
space. It is available in two versions: ALB & CG Version, and
Metal Version. The lamp is item # CHA8970 and does not come with a
bulb included.
Installation of this light fixture should be done in accordance
with all applicable local installation codes, and by a person
familiar with the construction and operation of it. It is important
to carefully inspect the item and contents upon delivery. If any
damage or defect is found, do not proceed with the installation.
Retain all packaging material until installation is complete and
approved.
The lamp requires the following tools for assembly (not
included): scissors.
Product Usage Instructions – ALB & CG Version
- Carefully remove all parts from the box and place them on a
clean, soft surface. - Install the harp (C) by squeezing it together and inserting it
into the top of the saddle (D). - Remove the finial (A) from the harp (C).
- Remove the shade (B) from its packaging and install it to the
harp (C) using the finial (A). If the shade has additional
packaging, carefully cut it off from the interior of the shade to
avoid damages. - Install a light bulb into the socket.
- Remove the protective cover (E) from the plug.
- Plug the lamp into an electrical outlet and test the
fixture.
Product Usage Instructions – Metal Version
- Follow steps 1-7 from the ALB & CG Version instructions
above.
For cleaning, use only a soft dry cloth or feather duster. Do
not use abrasive or chemical agents.
Note: This product is listed and approved for use in the United
States.
ASSEMBLY INSTRUCTIONS ALB & CG Version
A B
C Bulb not included D
E
Ring Form Large Table Lamp
Item # CHA8970
NOTICE: This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect item and contents carefully. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved.
TOOLS REQUIRED (NOT INCLUDED): Scissors
1. Carefully remove all parts from the box. Place on a clean, soft surface. 2. Install harp (C) by squeezing together and inserting into the top of
saddle (D). 3. Remove finial (A) from harp (C). 4. Remove shade (B) from packaging and install to harp (C) using
finial (A). NOTE: If shade has additional packaging, carefully cut off from interior of shade to avoid damages. 5. Install light bulb into the socket. 6. Remove protective cover (E) from plug. 7. Plug into electrical outlet and test the fixture.
Care Instructions: Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.
M
LI ST ED
US
ASSEMBLY INSTRUCTIONS Metal Version
A B
C Bulb not included D
E
Ring Form Large Table Lamp
Item # CHA8970
NOTICE: This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect item and contents carefully. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved.
TOOLS REQUIRED (NOT INCLUDED): Scissors
1. Carefully remove all parts from the box. Place on a clean, soft surface. 2. Install harp (C) by squeezing together and inserting into the top of
saddle (D). 3. Remove finial (A) from harp (C). 4. Remove shade (B) from packaging and install to harp (C) using
finial (A). NOTE: If shade has additional packaging, carefully cut off from interior of shade to avoid damages. 5. Install light bulb into the socket. 6. Remove protective cover (E) from plug. 7. Plug into electrical outlet and test the fixture.
Care Instructions: Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.
M
LI ST ED
US
