Skydance V1 Single Color Led Controller User Manual

V1 Single Color LED Controller

Product Information

Single Color LED Controller
Model No.: V1
1 Channel/Step-less dimming/Wireless remote control/Auto-transmitting/Synchronize/Push Dim/Multiple protection

Features
4096 levels 0-100% dimming smoothly without any ash. Match with RF 2.4G single zone or multiple zone dimming remote control. One RF controller accept up to 10 remote control. Auto-transmitting function: Controller automatically transmit signal to another controller
with 30m control distance. Synchronize on multiple number of controllers. Connect with external push switch to achieve on/off and 0-100% dimming function. Light on/off fade time 3s selectable. Over-heat / Over-load / Short circuit protection, recover automatically.
Technical Parameters

RED

Input and Output Input voltage Input current Output voltage Output current
Output power
Output type Package Size Gross weight

5-36VDC 8.5A 5-36VDC 1CH,8A 40W/96W/192W/288W (5V/12V/24V/36V) Constant voltage
L114 x W38 x H26mm 0.052kg

Dimming data Input signal Control distance Dimming gray scale Dimming range Dimming curve PWM frequency
Environment Operation temperature Case temperature (Max.) IP rating

RF 2.4GHz + Push Dim 30m(Barrier-free space) 4096 (2^12) levels 0 -100% Logarithmic 2000Hz (default)
Ta: -30 OC ~ +55 OC T c:+85 OC IP20

Safety and EMC

EMC standard (EMC)

ETSI EN 301 489-1 V2.2.3 ETSI EN 301 489-17 V3.2.4

Safety standard(LVD) Radio Equipment(RED)

EN 62368-1:2020+A11:2020 ETSI EN 300 328 V2.2.2

Certi cation

CE,EMC,LVD,RED

Warranty and Protection

Warranty Protection

5 years
Reverse polarity Over-heat Over-load Short circuit

Mechanical Structures and Installations
LED indicator Push switch com
Push switch in Installation rack Match key

LED output LED output + Power input Power input +
Installation rack

33mm

97mm

18mm

Wiring Diagram
Push Switch
RF remote

V1 LED Controller
V1 LED Controller

Single color LED strip
+
Single color LED strip
+

Power Supply 5-36VDC Constant Voltage

AC100-240V

Match Remote Control (two match ways)
End user can choose the suitable match/delete ways. Two options are offered for selection:

Use the controller’s Match key
Match: Short press match key, immediately press on/off key (single zone remote) or zone key (multiple zone remote) on the remote. The LED indicator fast flash a few times means match is successful.

Use Power Restart
Match: Switch off the power of the receiver, then switch on power, repeat again. Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 3 times on the remote. The light blinks 3 times means match is successful.

Delete: Press and hold match key for 5s to delete all match, the LED indicator fast flash a few times means all matched remotes were deleted.
User Manual Ver 1.1.4

Delete: Switch off the power of the receiver, then switch on power, repeat again. Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 5 times on the remote. The light blinks 5 times means all matched remotes were deleted.
1

Application notes
1. All the receivers in the same zone.

30m

30m

30m

30m

RF remote

Auto-transmitting: One receiver can transmit the signals from the remote to another receiver within 30m, as long as there is a receiver within 30m, the remote control distance can be extended.
Auto-synchronization: Multiple receivers within 30m distance can work synchronously when they are controlled by the same remote. Receiver placement may offer up to 30m communication distance. Metals and other metal materials will reduce the range. Strong signal sources such as WiFi routers and microwave ovens will affect the range. We recommend for indoor applications that receiver placements should be no further apart than15m.

2. Each receiver(one or more) in a different zone, like zone 1, 2, 3 or 4.

Zone 1

Zone 2

Zone 3

30m

30m

Zone 4

Zone 5

Zone 6

RF remote
Push Dim Function
The provided Push-Dim interface allows for a simple dimming method using commercially available non-latching (momentary) wall switchs.
Short press: Turn on or off light. Long press (1-6s): Press and hold to step-less dimming, With every other long press, the light level goes to the opposite direction. Dimming memory: Light returns to the previous dimming level when switched off and on again, even at power failure. Synchronization: If more than one controller are connected to the same push switch, do a long press for more than 10s,then the system is synchronized and all lights
in the group dim up to 100%. This means there is no need for any additional synchrony wire in larger installations.We recommend the number of controllers connected to a push switch does not exceed 25 pieces, The maximum length of the wires from push to controller should be no more than 20 meters.

PWM duty(%)

Dimming Curve
100
Gamma=1.6
90 80 70 60 50 40 30 20 10
10 20 30 40 50 60 70 80 90 100
Brightness(%)

Light on/off fade time
Long press match key 5s, then short press match key 3 times, the light on/off time will be set to 3s, the indicator light blink 3 times.
Long press match key 10s, restore factory default parameter, the light on/off time also restore to 0.5s.

Malfunctions Analysis & Troubleshooting

Malfunctions No light
Uneven intensity between front and rear,with voltage drop
No response from the remote

Causes 1. Nopower . 2. Wrongconnection or insecure . 1. Output cable is too long. 2. Wire diameter is too small. 3. Overload beyond power supply capability. 4. Overload beyond controller capability.
1. The battery has no power. 2. Beyond controllable distance. 3. The controller did not match the remote.

User Manual Ver 1.1.4

Troubleshooting 1. Check the power. 2. Check the connection. 1. Reduce cable or loop supply. 2. Change wider wire. 3. Replace higher power supply. 4. Add power repeater. 1. Replace battery. 2. Reduce remote distance. 3. Re-match the remote.
2