Volteck 48010 Led Accent Outdoor Light Fixture Installation Guide

48010 LED Accent Outdoor Light Fixture

Product Information:

Product Name: Arbotante exterior

Model Number: 48010 ARB-202L

Specifications:

• Input Voltage: 127 V~
• Frequency: 60 Hz
• Current: 58 mA
• Lamp Type: LED x 6
• Power: 5 W
• IP Rating: IP44

Important Safety Information:

• The mounting of this luminaire should be at least 0.50 m away
  from any combustible material to avoid the risk of fire.
• Disconnect the power supply before installation and/or
  maintenance.
• The lamp and parts of the luminaire may become hot enough to
  cause burns.

Maintenance:

Clean the luminaire with a dry cloth.

Product Usage Instructions:

1. Remove the fittings (nuts and bolts) holding the luminaire as
   shown in the figure.
2. Identify the line (black), neutral (white), and ground (green)
   wires that are connected to the luminaire, then connect them to the
   power supply respecting the conductor identification: Line to Line,
   Neutral to Neutral.
3. Hold the anchor of the flying buttress at the location where it
   is to be placed, mark the points to be drilled, and secure it with
   the fittings.
4. Attach the luminaire to the anchor previously mounted in step 2
   and secure it.

Arbotante exterior

48010 ARB-202L

LEA ESTAS INSTRUCCIONES ANTES DE INSTALAR: 127 V~ 60 Hz 58 mA Tipo de fuente de luz: LED x 6 5 W IP44
ADVERTENCIA El montaje de este luminario deberá de ser a una distancia mínima de 0.50 m de cualquier material combustible, para evitar el riesgo de incendio. Desconecte la fuente de energía eléctrica antes de la instalación y/o el mantenimiento. Las partes del luminario pueden calentarse lo suficiente para causar quemaduras.
Mantenimiento: Limpie el luminario con un paño seco.

Instalación:
Accesorios: 1 anclaje 2 tuercas de ajuste 2 rondanas 4 tornillos 2 tuercas cerradas 3 conectores rápidos

1

Retire los accesorios (tuercas y tornillos)

3

que sujetan al luminario como se muestra

en la figura.

Identifique los cables línea (negro), neutro (blanco) y tierra (verde) que vienen conectados al luminario, después conéctelos a la alimentación respetando la identificación de conductores: Línea a Línea, Neutro a Neutro.
(verde) Línea (negro) Neutro (blanco)

2

Sostenga el anclaje del arbotante en el lugar

donde se vaya a colocar, marque los puntos

a perforar y fíjelo con los accesorios.

4

Coloque el luminario al anclaje

previamente montado en el paso 2 y

fíjelo.

Outdoor light fixture

48010 ARB-202L

READ THESE INSTRUCTIONS BEFORE INSTALLATION: 127 V~ 60 Hz 58 mA Lamp type: LED X 6 5 W IP44
WARNING The mounting of this luminaire should be at least 0.50 m away from any combustible material to avoid the risk of fire. Disconnect the power supply before installation and/or maintenance. The lamp and parts of the luminaire may become hot enough to cause burns.
Maintenance: Clean the luminaire with a dry cloth.

Installation:

Accesorios:

1 anchor

2 adjusting nuts

4 screws 2 closed nuts

2 washers 3 quick connectors

1

Remove the fittings (nuts and bolts) holding

the luminaire as shown in the figure.

3

Identify the line (black), neutral (white) and

ground (green) wires that are connected to

the luminaire, then connect them to the

power supply respecting the conductor

identification: Line to Line, Neutral to

Neutral.

(green) Line (black) Neutral (white)

2

Hold the anchor of the flying buttress at the

location where it is to be placed, mark the

points to be drilled and secure it with the

fittings.

4

Attach the luminaire to the anchor

previously mounted in step 2 and secure it.

Importado por Truper, S.A. de C.V. Parque Industrial 1, Parque Industrial Jilotepec, Jilotepec, Edo. de Méx. C.P. 54257 Made in/Hecho en China, Tel.: 76 1782 9100. www.truper.com 11-2022

Imported by Truper, S.A. de C.V. Parque Industrial 1, Parque Industrial Jilotepec, Jilotepec, Edo. de Méx. C.P. 54257 Made in China, Tel.: 76 1782 9100. www.truper.com 11-2022

References

• Truper® - Es mucha herramienta