R10 Handheld Remote Control
Product Information:
Product Name: Handheld Remote Control
Version: V2.0
Applicable Models: A series and H series
Features: Emergency stop switch, smart key, IP65 protection
level, various button configurations
Transmitter Dimensions and Weight:
- Size: 120 * 60 * 35mm (4 buttons), 180 * 60 * 35mm (8 buttons),
240 * 60 * 35mm (12 buttons) - Buttons: 4/8/12 single speed/dual speed self reset buttons
- Material: PA6+30%GF
- Weight: 120g-360g
- Antenna: Inside
- Start Method: Rotate the emergency stop button and press the
start button for 2 seconds (A series short+long press start button,
please refer to drawings attached)
Transmitter Power Supply:
- A Series: 3 AA batteries
- H Series: 2 AA batteries
Control Distance: 150 meters (in an open environment, the
transmitter and receiver are both tested at a standard distance of
1 meter from the ground)
Working Temperature Range: -40 ~+80 degrees Celsius
Center Frequency Range: 433-434MHz
LED Indicator Light: Operation indicator/battery status
Key Lifespan: 2 million times
R-Series Receiver Dimensions and Weight:
- Models: R10, R15, R20
- Temperature Range: -40 ~+80 degrees Celsius
- Frequency Range: 433-434MHz
- Relay Capacity: 10A/250VAC
- Relay Life: Greater than 5 million times
- LED Indicator Light: Operation status indicator/RF signal
- Antenna: External (standard with soft antenna, other antennas
require special customization) - Shell Material/Protection Level: IP65
Product Usage Instructions:
1. Before installing and using the product, please read the user
manual carefully and check all the accessories and accompanying
drawings inside the packaging box.
2. Make sure to install the receiver according to the
installation instructions provided.
3. Insert the required number of AA batteries into the
transmitter (3 for A series, 2 for H series).
4. To start the remote control, rotate the emergency stop button
and press the start button for 2 seconds (refer to the attached
drawings for A series short+long press start button).
5. The control distance of the remote control is 150 meters in
an open environment.
6. The LED indicator light on the transmitter indicates the
operation status and battery level.
7. The R-Series receiver can be used with various specifications
and models of cranes or equipment.
8. Ensure that the receiver is installed correctly according to
the provided instructions.
9. The LED indicator light on the receiver indicates the
operation status and RF signal.
10. The transmitter and receiver communicate through a center
frequency range of 433-434MHz.
11. The remote control is suitable for applications such as
single and double beam cranes, European cranes, ground pumps,
vehicle-mounted pumps, and other equipment.
12. The remote control has a typical continuous operation time
of more than 500 hours using AA batteries at room temperature.
13. The remote control has an automatic shutdown feature (APO)
which is set to 30 minutes by default.
14. The key lifespan of the remote control buttons is 2 million
times.
15. For any further assistance or troubleshooting, please refer
to the user manual or contact customer support.
V2.0
Handheld Remote Control User Manual V2.0
A H (Applicable to handheld A series and H series)
Welcome to use industrial remote control products. Each of our products has undergone strict testing before leaving the factory. Please rest assured to use it.
Before installing and using this product, please patiently read this manual and count the various accessories and accompanying drawings inside the packaging box to avoid incorrect voltage during installation and burning the receiver.
CE FCC We are a high-tech enterprise dedicated to the research and development, production, and sales of industrial radio remote control systems. Our customers are distributed in many industries, including crane equipment, construction machinery, construction equipment, high-altitude operation equipment, engineering special vehicles, agricultural and forestry equipment, as well as special industries such as municipal fire protection, mining, tunnel construction, port and marine engineering, and oil extraction, our products have mature customer using cases; our products are of stable and reliable quality, and have passed EU CE and FCC certification. Currently, our products are exported to many countries and regions around the world.
AGV R IO RS485 RS232 Can Profibus-DP PWM Canopen ProfiNet DeviceNet J1939 our products include handheld remote controllers, mainly used for remote control of cranes and other simple equipment. Shoulder belt remote controllers are mainly used for remote control of more complex equipment, such as large tonnage cranes, pump trucks, aerial work vehicles, mobile AGVs, shield tunneling machines, fire trucks, mobile crushers, etc. R series receiver supports IO output, analog output, RS485 bus output, RS232 bus output, Canbus output, Profibus DP output, PWM output, Canopen output, ProfiNet output, DeviceNet output, J1939 output, etc.
1.
DCH-H, DCH-H21, DCH-H22, DCH-H31, DCH-H32, DCH-H51, DCH-H52, DCH-H41, DCH-H42, DCH-R10, DCH-R15, DCH-R20
TransmitterHseriesparametermodels: DCH-H, DCH-H21, DCH-H22, DCH-H31, DCH-H32, DCH-H51, DCH-H5 2, DCH-H41, DCH-H42, DCH-R10, DCH-R15, DCH-R20 etc
Emergency stop switch: mushroom head type, in accordance with EN13849-1 standard Protection level: IP65 Operating element: 4812 double speed self reset buttons Key identification: arrows, text, symbols, or customer defined Smart key: iKey (remote control keys of the same model are interchangeable)
120*60*35mm(4 180*60*35mm(8 240*60*35mm12 4/8/12/ PA6+30%GF 120g-360g 2 A EN13849-1 IP65 4 8 12 iKey Size: 120 * 60 * 35mm (4 buttons) 180 * 60 * 35mm (8 buttons) 240 * 60 * 35mm (12 buttons) Buttons: 4/8/12 single speed/dual speed self reset buttons Material: PA6+30%GF Weight: 120g-360g Antenna: inside Start method: Rotate the emergency stop button and press the start button for 2 seconds (A series short+long press start button, please refer to drawings attached).
150 1 -40~+80 433-434MHz LED /
Continuous operation time: more than 500 hours (2 AA batteries used at room temperature)
Typical applications: single and double beam cranes, European cranes, ground pumps, vehicle
200 H 2 5 A 3 5 500 2 APO 30
mounted pumps, and other equipment;
APO (automatic shutdown): Standard configuration for 30 minutes
Power supply: H series2 piece AA batteries
Power supply: A series3 piece AA batteries
Control distance: 150 meters (in an open environment, the transmitter and receiver are both tested at a standard distance of 1 meter from the ground);
Working temperature range: -40 ~+80 Center frequency range: 433-434MHz;
LED indicator light: operation indicator/battery status
Key lifespan: 2 million times
2. R
R10 R15 R20
R-series receiver parameter Model: R10; R15;R20
Temperature range: -40 ~+80
Frequency range: 433-434 MHz Relay capacity: 10A/250VAC Relay life: greater than 5 million times LED indicator light: operation status indicator/RF signal Antenna: External (standard with soft antenna, other antennas require special customization) Shell material/protection level: IP65
10,15,20
220×120×75mm
1000g
IP65
-25~+70
433-434 MHz
10A/250VAC
500
LED/
(
//IP65
10A/250VAC
Relay output: 10, 15, 20 relays Output interface: heavy-duty connector, cable optional Size: 220 × 120× 75mm Weight: 1000g Shell material: ABS Protection level: IP65 Relay capacity: 10A/250VAC
Transmitter
H21-H21 4 single button H22-H22 4 double button H31,A31-H31 8 single button H32,A32-H32 8 double button H41,A41-H41 10 single button H42,A42-H42 10 double button H51-H51 12 single button H52-H52 12 double button
Receiver Power
9-36VDC
30-420 VAC
3. Installation and operation of remote control system 3.1 Installation instructions Handheld series remote control can be used in conjunction with various specifications and models of cranes or equipment 3.2 Remark for receiver installation
2 Please pay attention to safety when climbing the crane.Before installation, please be sure to turn off the main power supply of the crane, and live installation is strictly prohibited.When there is a frequency converter near the receiver, the distance between the receiver and the frequency converter must be greater than 2 meters, or the receiver should be installed in a shielded metal box, and the distance from the antenna should be as far away as possible from the frequency converter.The receiver antenna should be installed as high and open as possible to avoid affecting the reception signal.
3.3 Installation of transmitter Battery installation: Please check the battery level before installation to avoid insufficient voltage that may cause the machine to fail to start.
4. Technical Support Maintenance and Fault Description
Please be noted that each transmitter and receiver is matched one to one and the frequency and address code are preset correspondingly ,If the customer purchases two transmitters to control one receiver at the same time, there may be a situation where two operators control one device at the same time, resulting in equipment failure or unpredictable conditions. The consequences will be borne by the customer.
4.1
1. 1
2.
4.2 Maintenance
1. The high-frequency module components in the Dechi remote control system enjoy
one year of free maintenance during standard operating hours (non human damage)
2. Provide one-year and lifetime warranty services for other components.
4.2 Common fault issue and solutions
Malfunction
Possible
Solution
reason
Transmitter
does not respond
No power supply Check if the battery
or low battery
power is sufficient
Replace transmitter battery
Transmitter keeps flashing red
Emergency Press up the emergency to turn it
stop unopen
up
The transmitter blinks green, but the receiver no response
Malfunction of receiver
Check that the receiver is powered on normally Check whether the serial number of the receiver and transmitter is consistent or not(need to matched one to one)
Some buttons do not work
Flashing green light after startup and then flashing red light After the transmitter starts normally, the crane will automatically trip
Malfunction of receiver Intelligent key not recognized
same frequency interference
Check if the cables of receiver is loose or disconnected
Check whether the Intelligent key is installed correctly
Replace the Intelligent key
5 Safety instructions 5.1 Purpose
Wireless remote control systems are used to remotely control controlled systems or devices, improving the convenience and efficiency of the entire controlled system’s operation, and improving the safety of operators.
2 300
Warning message There are high-voltage components inside the receiver, please ensure that the power supply of the receiver has been disconnected before opening. In emergency situations or when the crane or other controlled equipment malfunctions, please immediately press the emergency stop switch on the transmitter to enter a safe state of the system. Prohibit use on the sender’s device Prohibit modification, removal, and bypass of safety circuits in wireless systems; It is prohibited to modify any part of the entire emergency stop circuit of the wireless remote control system. The wireless remote control system is prohibited from being used in explosion hazardous areas Do not use two or more transmitters simultaneously to operate the same device Do not use the same frequency (or within a range of 300 meters) in the same factory area to avoid mutual interference
Specifications Hardware Version: 23043012 Software Version: /
(Max power: 2.65dBm) Extreme temperature: -20-45° Manufacturer DCH RADIO LIMITED COMPANY Address No 389, ZHAOJIAJINGROAD, SONGJIANG DISTRICT, SHANGHAI, CHINA Importer XXXXX Address XXXXX
FCC Warnning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.
