7-1621-53 LED 34 Inch Warm Brass Pendant Ceiling Light
Product Information
The product consists of the following items:
- Canopy (1)
- Ball Nut (2)
- Loop (8)
- Stems (7)
- Housing assembly (3)
- Screw (6)
- Fixture Body (4)
- Crystal (5)
Product Usage Instructions
- Carefully unpack all parts and identify them using the
illustration provided in the user manual for parts
identification. - Turn off the power to the installation point.
- Determine the desired height for the pendant installation and
select the appropriate stems. - Thread the wire through the selected stems (7).
- Connect the stems together and install them on the housing
assembly (3). - Attach the fixture body (4) to the housing assembly (3) using
screws (6). - Attach the crystal (5) to the fixture body (4) using the loop
(8) and ball nut (2). - Finally, attach the canopy (1) to cover the wiring and complete
the installation.
Note: It is important to follow all instructions carefully to
ensure safe and proper installation of the product.
ITEM NO.: 7-1620-43 7-1621-53
Canopy (1)
OR
Ball Nut (2)
Loop (8)
Stems (7)
Housing assembly (3)
Screw (6)
Fixture Body (4) Crystal (5)
ASSEMBLY INSTRUCTIONS
1.Carefully unpack and identify all parts referring to illustration for parts identification. 2.Turn the power to the installation point OFF. 3.Determine the desired height at which the pendant will be installed and select the stems. 4.Thread the wire through the stems (7). Connect the stems together and install them on the housing
assembly (3). The longer stems should be installed first on the housing assembly (3), while the shorter stems should be closer to the canopy (1). 5.Connect the stems (7) to the loop (8). 6.Refer to the additional installation instructions included with the product for wiring and installation. 7.Install the canopy (1) to the ceiling using the ball nut (2). 8.Install the crystal (5) onto the fixture body (4) with the screw (6). 9.Restore power to the installation point and retain this sheet for future reference.
