Bestway 53301 Portable Swimming Pool Instruction Manual (+ PDF)

Contents hide

53301 Portable Swimming Pool

Product Information:

The product is an inflatable device, likely a portable swimming
pool, designed for outdoor use. It is manufactured by Bestway, and
you can find more information and support on their website at
www.bestwaycorp.com. The
product comes with an owner’s manual that provides important safety
instructions and usage guidelines.

Product Usage Instructions:

Ensure active adult supervision at all times, especially for
children under 5 years old.
Place the product on a level surface at least 3m away from any
structures or obstructions such as fences, garages, overhanging
branches, laundry lines, or electrical wires.
Position the product facing away from the sun while in
use.
Only use the product for domestic purposes and strictly for
outdoor use.
Empty the pool when not in use to prevent drowning. Children
can drown in very small amounts of water.
Do not modify the original inflatable device without following
the manufacturer’s instructions.
Install the inflatable device and paddling pool over impact
absorbing surfaces like sand, wood-bark chips, rubber, or foam.
Avoid installing it over concrete, asphalt, or any hard
surface.
Use the anchorage system provided to prevent the product from
being lifted by light winds. Do not use the product if wind speed
exceeds 20 mph.
To prevent friction burns, ensure that clothing fully covers
arms, legs, and torso while using the product.
Keep inflation devices at least 2.5m away from the toy to avoid
injuries from falling onto them.
Always follow the assembly and installation instructions
provided by the manufacturer.
Regularly check all anchors before and during use.
Children must remove helmets, loose clothing, scarves,
headgear, shoes, glasses, and any sharp or hard objects from their
pockets to avoid puncturing the bounding surface.
Do not clean the blower with water to prevent electric
shock.
Avoid using an extension cord with this product.
Do not allow users to engage in somersaults or rough play.
Keep food, drink, and gum away from the unit.
Do not allow users to climb or hang on containment walls.
Always keep the entrance free from obstruction.

View Fullscreen

©2022 Bestway Inflatables & Material Corp. All rights reserved/Tous droits réservés/Todos los derechos reservados/Alle Rechte vorbehalten/Tutti i diritti riservati Trademarks used in some countries under license from/ Marques utilisées dans certains pays sous la licence de/ Marcas comerciales utilizadas en algunos países bajo la licencia de/ Die Warenzeichen werden in einigen Ländern verwendet unter Lizenz der/ Marchi utilizzati in alcuni paesi concessi in licenza a Bestway Inflatables & Material Corp., Shanghai, China Manufactured, distributed and represented in the European Union by/ Fabriqués, distribués et représentés dans l’Union Européenne par/Fabricado, distribuido y representado en la Unión Europea por/ Hergestellt, vertrieben und in der Europäischen Union vertreten von/Prodotto, distribuito e rappresentato nell’Unione Europea da Bestway Europe S.p.a., Via Resistenza, 5, 20098 San Giuliano Milanese (Milano), Italy Distributed in Latin America by/Distribué en Amérique latine par/Distribuido en Latinoamérica por/Distribuído na América Latina por Bestway Central & South America Ltda, Salar Ascotan 1282, Parque Enea, Pudahuel, Santiago, Chile Distributed in Australia & New Zealand by Bestway Australia Pty Ltd, Unit 2/98-104 Carnarvon St Silverwater, NSW 2128, Australia Tel: Australia: (+61) 2 9037 1388; New Zealand: 0800 142 101 Distributed in United Kingdom by Bestway Corp UK Ltd. 8 Wentworth Road, Heathfield Industrial Estate, Newton Abbot, Devon, TQ12 6TL Exported by/Exporté par/Exportado por/Exportiert von/Esportato da Bestway (Hong Kong) International Ltd./Bestway Enterprise Company Limited Suite 713, 7/Floor, East Wing, Tsim Sha Tsui Centre, 66 Mody Road, Kowloon, Hong Kong
www.bestwaycorp.com

.bestwaycorp.com/suppo

Visit www

rt for help

OWNER’S MANUAL
Visit Bestway YouTube channel

WE SUGGEST NOT TO RETURN THE PRODUCT TO THE STORE
QUESTIONS? PROBLEMS? MISSING PARTS?
For FAQ, Manuals, Videos Or Spare Parts, Please Visit bestwaycorp.com/support

WARNING
IMPORTANT SAFETY INSTRUCTIONS PLEASE READ THESE INSTRUCTIONS CAREFULLY
BEFORE USING THIS PRODUCT. FAILURE TO FOLLOW THESE INSTRUCTIONS COULD
RESULT IN SERIOUS INJURY OR DEATH.

WARNING

Prevent Drowning
Children under 5, especially toddlers are at high risk of drowning. Closely watch children who are in or near this inflatable device. Empty inflatable device or prevent access when not in use.

WARNING: Never leave your child unattended drowning hazard. Supervise children at all times — Keep within arm’s reach. Empty the pool and store safely when not in use.

WARNING! CHILDREN HAVE DROWNED IN PORTABLE SWIMMING POOLS. ENSURE ACTIVE ADULT SUPERVISION AT ALL TIMES. DO NOT LEAVE CHILDREN UNSUPERVISED IN OR AROUND THE POOL-KEEP THEM WITHIN ARM’S REACH. EMPTY AND STORE SAFELY AFTER USE. WARNING 1. Adult assembly required. 2. Place the product on a level surface at least 3m from any structure or obstruction such as a fence,
garage, house, overhanging branches, laundry lines or electrical wires. 3. Recommend back towards the sun when playing. 4. Only for domestic use. 5. Only for outdoor use. 6. Children can drown in very small amounts of water. Empty the pool when not in use. 7. Modification by the consumer of the original Inflatable device (for example the adding of an accessories)
shall be carried out according to the instructions of the manufacturer. 8. Inflatable device and paddling pool should be installed over impact absorbing surfaces such as sand,
wood-bark chips, rubber and foam and should not be installed over concrete, asphalt or any hard surface. 9. This toy is not safe if the anchorage system is not used as it may be lifted by light winds. Do not use the
product if wind speed exceeds 20 mph. 10. Use of this product may cause friction burns to exposed skin. Ensure that clothing fully covers arms and
legs, as well as the torso. 11. Children may be injured by falling onto inflation devices. Ensure that inflation devices are positioned at
least 2.5m from the toy. 12. Keep assembly and installation instructions for further reference. 13. Failure to follow the installation and operating instructions present a risk of serious injury or death 14. Always check all anchors before and during use. 15. Children must remove helmets, loose clothing, scarves, headgear, shoes and glasses, as well as any
sharp or hard objects from their pockets, as they may puncture the bounding surface. 16. To prevent electric shock, do not clean the blower with water. 17. Do not use extension cord with this product. 18. Do not allow users to do somersaults or rough play. 19. Do not allow food, drink or gum inside unit. 20. Do not allow users to climb or hang on containment walls. 21. Always keep the entrance free from obstruction.

WARNING FOR AIR BLOWER 1. When the appliance is not in use and before cleaning,
unplug the appliance from the outlet. 2. To protect against the risk of electrical shock, do not
immerse the unit, cord or plug in water or other liquid. 3. DANGER! Unplug or disconnect the appliance from the
power supply before maintenance. 4. This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. (For market other than EU). This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. (For EU market) 5. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
BLOWER OPERATION
ON/OFF SWITCH OFF — O ON — l
Consumer information sheet for playground surfacing materials The US Consumer Product Safety Commission (CPSC) estimates that about 100 000 playground equipment-related injuries resulting from falls to the ground surface are treated annually in US hospital emergency rooms. Injuries involving this hazard pattern tend to be among the most serious of all playground injuries, and have the potential to be fatal, particularly when the injury is to the head. The surface under and around playground equipment can be a major factor in determining the injury-causing potential of a fall. It is self-evident that a fall on to a shock-absorbing surface is less likely to cause a serious injury than a fall onto a hard surface. Playground equipment should never be placed on hard surfaces, such as concrete or asphalt, and while grass may appear to be acceptable, it may quickly turn to hard-packed earth in areas of high traffic. Shredded bark mulch, wood chips, fine sand or fine gravel are considered to be acceptable shock absorbing surfaces when installed and maintained at a sufficient depth under and around playground equipment. Below lists the maximum height from which a child would not be expected to sustain a life-threatening head injury in a fall on to four different loose-fill surfacing materials if they are installed and maintained at depths of 150mm, 225mm and 300mm.
3

Fall height in millimeters from which a life-threatening head injury would not be expected

Type of material
Double shredded bark mulch Wood chips Fine sand Fine gravel

150 mm 1800 1800 1500 1800

Depth of surfacing material 225 mm 3000 2100 1500 2100

300 mm 3300 3600 2700 3000

However, it should be recognized that all injuries due to falls cannot be prevented, no matter what surfacing material is used. It is recommended that a shock absorbing material extend a minimum of 1800mm in all directions from the perimeter of stationary equipment such as climbing frames and slides. However, because children may deliberately jump from a moving swing, the shock absorbing material should extend in the front and rear of a swing a minimum distance of twice the height of the pivot point measured from a point directly beneath the pivot on the supporting structure. This information is intended to assist in comparing the relative shock-absorbing properties of various materials. No particular material is recommended over another. However, each material is only effective when properly maintained. Materials should be checked periodically and replenished to maintain correct depth as determined necessary for the equipment in question. The choice of a material depends on the type and height of the playground equipment, the availability of the material in a particular area, and its cost. This information has been extracted from the CPSC publications “Playground Surfacing — Technical Information Guide” and “Handbook for Public Playground Safety”.

DISPOSAL
Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your local authority or retailer for recycling advice.

PRODUCT DESCRIPTION

Maximum Item Age number
of users

53301 5-10

53345 5+

53349 5+

53381 3-8

53387 5+

Maximum user weight capacity

Individual weight capacity

270 kg (600 lbs) 54 kg (120 lbs)

227 kg (500 lbs) 45 kg (100 lbs)

544 kg (1200 lbs) 54 kg (120 lbs)

Combined user weight capacity
(Platform)
54 kg (120 lbs)
54 kg (120 lbs)
54 kg (120 lbs)
135 kg (300 lbs)
108 kg (238 lbs)

Maximum fall
height

Critical fall height

Water capacity

1.42 m (56) 1.92 m (63.5) 0.97 cbm (256 gal.)

1.43 m (56) 1.73 m (68) 1.089 cbm (288 gal.)

1.43 m (56) 1.73 m (68) 1.462 cbm (386 gal.)

35 cm (14) 1.43 m (56) 1.13 cbm (298 gal.)

1.45 m (57) 1.72 m (68) 2.39 cbm (631 gal.)

SETUP INSTRUCTIONS
PLACEMENT: Use on a flat, grassy area only. Do not use on pavement or hard surfaces. Usage area should be free of rocks, bumps, holes, sticks, etc. The water park setup location should have a minimum distance of 10ft (305cm) from any free-standing structures or obstructions. This include: houses, garages, fences, trees, playground equipment, large rocks, etc.

10ft.(305cm)

safety area

10ft.(305cm)

ASSEMBLY
NOTE: 1. Place on level ground and firm grass or soil to allow proper use of stakes. 2. Stakes should be placed at an angle for better anchorage, should be driven under the ground to
reduce tripping and tipping hazards. ATTENTION: Each anchor bag should be filled to 40lbs.(18kg) of water. Each anchor bag must be attached while using the park (If your product is equipped with anchor bag). After inflation, the blower should run continuously while children are playing.
DRAINING & DEFLATION
IMPORTANT: Drain the water park of all water to prevent mold and mildew. Product should be completely dry before storage. Do not fold and store water park if any moisture remains. IMPORTANT: All children must exit the water park before deflation or draining. 1. Turn off the garden hose and disconnect it from the tube. 2. Turn off the blower motor and unplug it from the outlet. Move the blower to dry ground if it appears
that it will get wet from draining water. 3. Open the water valve and drain the water. 4. Remove stakes and drag water park away from the drained water to a dry area. 5. Re-stake the water park and blower, tie the inflation tube to the blower, then reconnect and power up
the blower. 6. Leave the water park inflated until all remaining water has evaporated and the water park is dry. 7. Once water park is completely dry, turn off the blower and unplug it from the outlet. 8. Remove and drain the hose assembly from the Water park. Untie the drawstring from the short outlet
tube and allow the water park to fully deflate. Remove the hose assembly and wrap it up with no kinks.
MAINTENANCE OF WATER PARK 1. Change the water of pools frequently (particularly in hot weather) or when noticeably contaminated,
unclean water is harmful to the user’s health. 2. Check the product for damage at the beginning of each season and at regular intervals when in use. If
these checks are not carried out, the activity toy could overturn or otherwise become a hazard. 3. Clean the product and remove any accumulated debris before each use. Wipe the product using a dry
cloth or a cloth dampened with a neutral, non-flammable, non-toxic cleaning and sanitizing solution or pure water.
MAINTENANCE OF AIR BLOWER THE SOURCE OF ELECTRICAL SUPPLY MUST BE DISCONNECTED PRIOR TO ANY SERVICING OR CLEANING. 1. USE A DRY CLOTH TO GENTLY CLEAN ALL SURFACES. 2. STORE IN A COOL, DRY PLACE AND OUT OF CHILDREN’S
REACH.
STORAGE
IMPORTANT: 1. Never store the water park when wet. Allow to dry before folding for storage. Follow all previous
instructions each use. 2. Store park in a secure place away from children to prevent suffocation hazards. Never leave either the
park or the blower outside when not in use.
5

Fold all pieces of the water park toward the center. NOTE: If bottom surface is still moist, allow it to air dry prior to folding.

Roll up the water park tightly and compress the fabric to expel all of the remaining air.

3 Slip the carrying bag over the rolled-up inflatable
park. Flip the bag and the park over, close the bag, and store the park and the blower in a dry place. To extend the life of the water spraying hose assembly, store it in a adequately ventilated area. Do not store them together with the park.

NOTE: Do not place the water spray tubing inside the water park when rolling it up

REPAIR PATCH INSTRUCTIONS
Replace defective parts in accordance with the instructions. Please keep for future reference. 1. Deflate the item, clean the area and allow to dry thoroughly. 2. Cut a portion of the patch to the size needed and round the corners. (See Fig.1&2). 3. Apply the repair patch:
Option #1: Using the vinyl patch. Remove the adhesive backing from the patch material, position the patch over the damaged area and smooth out any bubbles. Option #2: Using the fabric patch and the glue (not included). Apply only the amount of glue(not included) needed to cover the repair site and press patch firmly over the puncture. 4. Allow to sit for 30 minutes before re-inflating.
WARNING: Repair patched must be applied by an adult only. Keep out of children.

correct

incorrect
TROUBLESHOOTING
PROBLEM Motor won’t run Motor runs but wheel makes a scraping noise Motor is unable to run normally

CAUSE
1. Switch not turned on. 2. The circuit is opened or it is poor contact. 3. Electric capacity is damaged. 4. Choked up by hard objects.
1. Screws on the vaned wheel are loose. 2. Foreign objects in air-blower.
1. The voltage is unstable. 2. Motor is affected with damp. 3. Electric capacity is failure. 4. The impeller is loose.

53301
001 x 1 P04882

005 x 8 P03862

002 x 1 P04541 P04543(GB)

003 x 2 P04559

006 x 1 P00324

007 x 1
3

004 x 1 P00320
008 x 1 P62053

53345
001 x 1 P04689

005 x 10 P03862

002 x 1 P04541 P04543(GB)

003 x 2 P04559

006 x 1 P00324