Proaim Vi-spgp-01 Suction Car Mount With Vibration Isolator User Manual

VI-SPGP-01 Suction Car Mount with Vibration Isolator

Product Information: SuperGrip Suction Car Mount with Vibration
Isolator (VI-SPGP-01)

The SuperGrip Suction Car Mount with Vibration Isolator is a
professional-grade camera mount designed to provide stable and
smooth footage while mounted on a moving vehicle. The mount
includes a Vibration Isolator, four arms, two safety belts, eight
suction grippers, and eight dust covers. The mount can be used with
a DJI-QR Plate (not included) to attach a gimbal and camera for
stable footage while on the move.

What’s In The Box:

• Vibration Isolator
• 4 x Arms
• 2 x Safety Belt (Pair)
• 8 x Suction Grippers
• 8 x Dust Cover (Black)
• 4 x SS Allen Bolt’s size: (1/4 x 304 x 35mm)
• 4 x Washer
• 1 x Extra Long L-Type Allen Key (Size: 3/16)

All rights reserved. No part of this document may be reproduced,
stored in a retrieval system, or transmitted by any form or by any
means, electronic, mechanical, photo-copying, recording, or
otherwise, except as may be expressly permitted by the applicable
copyright statutes or in writing by the Publisher.

Assembly Instructions:

1. Assembling of Vibration Isolator with SuperGrip Suction:
   1. Align the arm to one of the corners of the Vibration Isolator
      and insert the bolt.
   2. Tighten and secure the bolt using the Allen key and attach the
      remaining arms to the corners of the Isolator.
   3. Use the vibration isolator separately in Over-slung or
      Under-slung, whether on a vehicle, crane, jib, or dolly.
   4. Remove the black dust cover of Suction Car Mount.
2. Align the Suction Gripper with the screw hole provided in the
   arm and tighten the assembly. Attach the remaining cups
   properly.
3. SuperGrip Suction Setup:
   1. Place your suction grippers at the desired point on your
      car.
   2. Press down the suction Grippers and keep pushing the pump to
      firmly fix it onto the car surface. Repeat this process for all the
      suction cups.
   3. Recheck the Pump every 90 minutes. If the red line is visible,
      re-pump the cup without losing the remaining vacuum till the red
      line disappears.
4. Place the DJI-QR Plate (Not Included) on the Suction Car Mount
   and insert the two Allen bolts. Tighten both bolts using the Allen
   key.
5. Push and open the lock lever of the DJI-QR plate (Not
   Included). Attach the gimbal by sliding it onto the DJI-QR plate
   (Not Included) of the suction car mount and tighten it with the
   help of the knob provided on the DJI-QR plate.
6. Unlock the knob of the Gimbal (Not Included) and remove the
   plate by employing the push pin.
7. Align the gimbal plate to the thread at the bottom of the
   camera and insert the bolt. Tighten the bolt using a screwdriver
   and secure the assembly with the knob provided on the gimbal, as
   shown in the image.

Product Usage:

The SuperGrip Suction Car Mount with Vibration Isolator is
designed to provide stable and smooth footage while mounted on a
moving vehicle. To use the mount, follow these steps:

1. Assemble the Vibration Isolator with SuperGrip Suction as per
   the instructions provided.
2. Align the Suction Gripper with the screw hole provided in the
   arm and tighten the assembly. Attach the remaining cups
   properly.
3. Place your suction grippers at the desired point on your
   car.
4. Press down the suction Grippers and keep pushing the pump to
   firmly fix it onto the car surface. Repeat this process for all the
   suction cups.
5. Recheck the Pump every 90 minutes. If the red line is visible,
   re-pump the cup without losing the remaining vacuum till the red
   line disappears.
6. Place the DJI-QR Plate (Not Included) on the Suction Car Mount
   and insert the two Allen bolts. Tighten both bolts using the Allen
   key.
7. Push and open the lock lever of the DJI-QR plate (Not
   Included). Attach the gimbal by sliding it onto the DJI-QR plate
   (Not Included) of the suction car mount and tighten it with the
   help of the knob provided on the DJI-QR plate.
8. Unlock the knob of the Gimbal (Not Included) and remove the
   plate by employing the push pin.
9. Align the gimbal plate to the thread at the bottom of the
   camera and insert the bolt. Tighten the bolt using a screwdriver
   and secure the assembly with the knob provided on the gimbal, as
   shown in the image.

Caution: Always recheck the Pump every 90 minutes while using
the mount. If the red line is visible, re-pump the cup without
losing the remaining vacuum till the red line disappears.

1
SuperGrip Suction Car Mount with Vibration Isolator (VI-SPGP-01)
Assembly Manual

What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed below.

Vibration Isolator

4 x Arms

2 x Safety Belt (Pair)

8 x Suction Grippers

8 x Dust Cover (Black)

All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means, electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright
statutes or in writing by the Publisher.

2
4 x SS Allen Bolt’s size: (1/4 x 304 x 35mm)
& 4 x Washer
1 x Extra Long L-Type Allen Key (Size: 3/16″)
Assembling of Vibration Isolator with SuperGrip Suction
Align the arm to one of the corners of the Vibration Isolator, and then insert the bolt.
Tighten and secure the bolt using the Allen key, and attach the remaining arms to the corners of the Isolator.
NOTE: Use the vibration isolator separately in Over-slung or Under-slung, whether on a vehicle, crane, jib, or dolly. Remove the black dust cover of Suction Car
Mount.

3 Align the Suction Gripper with the screw hole
provided in the arm, and then properly tighten the assembly.
Attach the remaining cups properly.
SuperGrip Suction Setup
Place your suction grippers at the desired point on your car.
Press down the suction Grippers and keep pushing the pump to firmly fix it onto the car surface. Repeat this process for all the suction cups.
Caution: Recheck the Pump every 90 minutes. If the red line is visible. Re-pump the cup without losing the remaining vacuum till the red line disappears.
Place the DJI-QR Plate (Not Included) on the Suction Car Mount, and then insert the two Allen bolts.

4
Both the bolts need to be tightened using the Allen key.
Push and open the lock lever of the DJI-QR plate (Not Included).
Then attach the gimbal by sliding it onto the DJI-QR plate (Not Included) of the suction car mount and tighten it with the help of the knob provided on the DJI-QR plate.
Unlock the knob of the Gimbal (Not Included) and remove the plate by employing the push pin.
Align the gimbal plate to the thread at the bottom of the camera, and then insert the bolt and tighten it using a screw driver.
Tighten and secure the assembly with the knob provided on the gimbal, as shown in the image.

5
YOUR PROAIM SUPERGRIP SUCTION CAR MOUNT WITH VIBRATION ISOLATOR ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts. Warranty doesn’t cover transportation costs nor does it cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspection and evaluation by us. Liability: We are not liable for damage caused by products that we do not supply or from mishandling in transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company. Contact Us: In case of any kind of dissatisfaction, please Contact us immediately and we promise our utmost support and care until you use our product.