RM-18 Bead Rotary Machine
Product Information
BEAD ROTARY MACHINE OPERATION MANUAL
The Bead Rotary Machine is a hand-operated tool that can form
sheet metal up to 18 gauge thickness mild steel or equivalent. The
machine is made up of cast iron and steel, ensuring minimum
deflection of the workpiece during forming operations. It comes
with six die sets that allow for various operations such as wiring,
edging, ogee bead, single bead, and elbow edging.
Main Technical Specification
- Model: RM-18
- Max. Capacity of Mild Steel: 18 Gauge (1.2mm)
- Throat Depth: 18″ (457mm)
- Six Pairs of Dies: 1/16″, 1/8″, 1/4″ step dies and 1/4″, 3/8″,
1/2″ bead dies - Die Sizes: 1.6mm, 3.2mm, 6.35mm step dies 6.35mm, 9.5mm, 12.7mm
bead dies - Packing Size (L x W x H): 28-47/64 x 10-7/16 x 5- 1/8 (730mm x
265mm x 130mm) - Net Weight: 57.3 lbs (26 kg)
- Shipping Weight: 59.5 lbs (27 kg)
Product Usage Instructions
Before using the Bead Rotary Machine, read and understand all
instructions provided in the manual. Follow the basic precautions
to reduce the risk of personal injury and/or damage to the
equipment.
Work Area
- Operate in a safe work environment, keep your work area clean,
well-lit, and free of distractions. Place lights so you are not
working in a shadow. - Keep anyone not wearing the appropriate safety equipment away
from the work area. - Store unused tools properly in a safe and dry location to
prevent rust or damage. Lock tools away and keep out of the reach
of children.
Installation and Caution
Follow these instructions to install the Bead Rotary
Machine:
- Check whether all parts are fully equipped and not damaged
according to the parts list or part figure. - Mount the machine on a table clamp or specific stand (not
supplied). Make sure to provide clearance for crank am rotation
area. - Leave plenty of room around the machine for easy operating, in
order to avoid injury. - Remove the anti-rust grease on processing surfaces and some
parts included kerosene.
Take note of the following cautionary measures:
- Read the manual before operation and make yourself understand
its structure and principle completely. - Do not operate the material width and thickness than table list
max. range. - Do not force the rotary machine. It will do the job better and
more safety at the rate for which it was intended. - Do not overreach. Keep proper footing and balance at all
times. - Do not touch the bead roller during operation.
- Stay alert, watch what you are doing. Do not operate any
machinery when you are tired.
BEAD ROTARY MACHINE OPERATION MANUAL
WARNING
Read and understand all instructions before using this tool. The operator must follow basic precautions to reduce the risk of personal injury and/or damage to the equipment.
HAZARD DEFINITIONS
Please familiarize yourself with the hazard notices found in this manual. A notice is an alert that there is a possibility of property damage, injury or loss of life if certain instructions are not followed. DANGER! This notice indicates an immediate and specific
hazard that will result in severe personal injury or loss of life if the proper precautions are not taken. WARNING! This notice indicates a specific hazard or unsafe practice that could result in severe personal injury or loss of life if the proper precautions are not taken. CAUTION! This notice indicates a potentially hazardous situation that may result in minor or moderate injury if proper practices are not taken. NOTICE! This notice indicates that a specific hazard or unsafe practice will result in equipment or property damage, but not personal injury.
1
WORK AREA
1. Operate in a safe work environment, Keep your work area clean, well- lit and free of distractions. Place lights so you are not working in a shadow.
2. Keep anyone not wearing the appropriate safety equipment away from the work area.
3. Store unused tools properly in a safe and dry location to prevent rust or damage. Lock tools away and keep out of the reach of children.
Usage
1. This bead roller Rotary machine is hand operated and will form sheet metal up to 18 Gauge thickness mild steel (or equivalent). The Rotary machine is constitute of cast iron and steel, and ensuing minimum deflection of the work piece dung forming operations. Six die sets are included, allowing the following operation to be performed wiring, edging, ogee bead, single bead, and elbow edging.
2
2. Main technical specification
Model Max. Capacity of Mild Steel Throat Depth
RM- 18 18 Gauge
1.2mm 18″
457mm
1/16″, 1/8″, 1/4″ step dies and 1/4″, 3/8″, 1/2″ bead dies
Six Pairs of Dies
1.6mm, 3.2mm, 6.35mm step dies 6.35mm, 9.5mm, 12.7mm bead dies
Packing Size (L x W x H) Net Weight Shipping Weight
28-47/64″ x 10-7/16″ x 5- 1/8″ 730mm x 265mm x 130mm 57.3 lbs 26 kg 59.5 lbs 27 kg
3
3. Installation and caution
3.1 Installation 3.1.1 Please check whether the part of this machine are fully equipped
and not damaged according to the parts list or part figure.
3.1.2 This machine should be mounted on table clamp or specific stand (not supplied), Be sure to provide clearance for crank am rotation area.
3.1.3 Please leave plenty room around the machine for your easy operating, in order to avoid injury.
3.1.4 Please remove the anti- rust grease on processing surfaces and some parts included kerosene.
3.2 Caution 3.2.1 Please read the manual before operation and make yourself
understand its structure and principle completely.
3.2.2 Please don’t operate the material width and thickness than table list max. range.
3.2.3 Do not force the rotary machine. It will do the job better and more safety at the rate for which it was intended.
3.2.4 Do not over reach. Keep proper footing and balance at all times. 3.2.5 Please don’t touch the bead roller during operation. 3.2.6 Stay alert watch what you are dong Do not operate any machinery
when you are tired.
4
4
4
4
