USER GUIDE Ovela
Ovela Jeps on 2 Seater Sofa Bed
COMPONENTS
pillows
solid wood legs
alex spanner
leg screws
leg spacers
ASSEMBLY
STEP 1 – Please assembly all the wooden legs.
STEP 2 – To use it as a sofa bed please open the bottom zipper and pull out the 4x metal legs. close the zippers.
STEP 3 – To use it as a sofa seater, roll up the sofa end and pull up the sofa head like the diagram below.
The job is now complete! in the interest of our environment please dispose of all packaging thoughtfully.
WARNING
FAILURE TO FOLLOW THESE BASIC STEPS CAN LEAD TO DAMAGE THAT IS NOT COVERED BY YOUR WARRANTY
1
Read Instructions carefully. Check no parts are missing.
2
Lay out all of the components on a soft surface as if you were preparing to do a jigsaw puzzle.
3
Carefully identify each component, especially those that are similar. The most common mistake is getting things back to front.
4
Separate and identify each component from the hardware pack and rest each one in its proper
5
DO NOT fully tighten screws cleave slightly loose).When the item is fully assembled
tighten the screws – but do not over tighten.
6
If glue is required DO NOT set until you are certain that the parts belong together.
