hip dac 2 Gold Edition Portable Hi-Res DAC Headphone AMP
Product Information
- Digital Input: USB 3.0 Type ‘A’ (USB2.0 compatible)
- Formats supported: DSD256 / 11.3MHz PCM 384kHz MQA Decoder
- DAC: Bit-Perfect DSD & DXD DAC by Burr Brown
- Headphone Outputs: Balanced 4.4mm / UnBAL 3.5mm
- Power Output: Balanced 400mW @ 32Ω; 6.3V @ 600Ω, UnBAL 280mW @
32Ω; 3.2V @ 600Ω - Battery: Lithium-polymer 2200mAh (approximately 8 hours of
usage) - Power System: Charging via USB-C, BC V1.2 compliant up to
1000mA charging current and 6.3 volts Power (max)
Product Usage Instructions
- Connect the product to your device using the provided USB
cable. - If your device has a USB 3.0 Type ‘A’ port, connect the
corresponding end of the cable to it. If not, it is also compatible
with USB 2.0 ports. - Ensure that the product is charged before usage. Connect the
USB-C end of the cable to a power source that complies with BC V1.2
standards and supports up to 1000mA charging current and 6.3
volts. - Once fully charged, disconnect the charging cable from the
product. - Connect your headphones to the appropriate headphone output.
Use the balanced 4.4mm port for balanced headphones and the UnBAL
3.5mm port for unbalanced headphones. - Turn on your device and start playing audio.
FEATURES · Portable hi-res DAC/headphone amp connects to source devices via USB · Replaces inferior DAC and amp circuitry in smartphones, tablets, PCs and Macs · Vastly improves headphone sound at home and on the go · Excellent build quality seamless aluminium enclosure slips easily into a bag or pocket · State-of-the-art hi-res audio support 24-bit/384kHz PCM, bit-perfect DSD and MQA · Powerful high-fidelity amp stage drives all corded headphones and in-ear monitors with ease · Balanced circuit design delivers ultra-low signal distortion · High-quality rotary analogue volume control · PowerMatch setting matches the level of drive to the connected headphones · XBass tailors bass response to suit your music and your headphones · Two headphone outputs: 4.4mm Pentaconn balanced and 3.5mm S-Balanced · S-Balanced output cuts distortion by 50% with single-ended headphone connections · USB-A input for audio and separate USB-C input for charging
CONTENTS · hip dac Gold · USB-C OTG Cable
· USB3.0 Cable · Quick Start Guide
· USB-A to USB-C Cable · Instruction Card
SPECIFICATIONS Digital Input: USB 3.0 Type ‘A’ (USB2.0 compatible)
Formats supported: DSD256 / 11.3MHz PCM 384kHz MQA Decoder
DAC: Bit-Perfect DSD & DXD DAC by Burr Brown
Headphone Outputs: Balanced 4.4mm / UnBAL 3.5mm Power Output: Balanced 400mW @ 32; 6.3V @ 600 UnBAL 280mW @ 32; 3.2V @ 600 Battery: Lithium-polymer 2200mAh approx. 8 hours Power System: Charging via USB-C, BC V1.2 compliant up to 1000mA charging current and 6.3 volts Power (max): <2W idle, 4W max Dimensions: 102 x 70 x 14 mm (4.0″ x 2.8″ x 0.6″) Net weight: 135 g (0.30 lbs)
Limited Warranty: 12 months*
*12 months typical or as permitted/required by local reseller **Specifications are subject to change without notice.
Technology licensed from AMR (UK) Assembled in China. Ver1.0
Portable hi-res DAC/headphone amp
Analogue bass boost for max enjoyment
Fully balanced circuitry
Hi-Res Audio Streaming
Burr-Brown® chipset True NativeDSD
Bit-Perfect DXD/PCM
