T2261
X8 RoboVac Hybrid
QUICK START GUIDE
Using Your Robo
If you cannot remove the objects surrounding the Charging Base, check whether RoboVac can return without assistance; if not, contact eufy customer service for help.
Always keep the Charging Base plugged in, otherwise RoboVac will not automatically return. – When the Charging Base is connected to AC power, the LED indicator on the Charging Base is SOLID WHITE.
Fully charge RoboVac before use. The LED indicator on RoboVac pulses orange while charging, and is solid blue when fully charged. Download the EufyHome app and follow the in-app instructions to complete the Wi-Fi connection. You then will be able to control RoboVac via this app. Refer to the Owner’s Manual for details.
Using Mopping System
Attach the waterproof pad to the charging base. Wet the cloth before mopping.
Cleaning and Maintenance
Important Tips
When using for the first time follow RoboVac to observe and resolve any problems that may occur.
A. Remove power cords and small objects from the floor that may entangle RoboVac.
B. Fold tasseled edges of area rugs underneath to prevent tangling RoboVac. Avoid cleaning very dark-colored high-pile rugs or rugs thicker than J.02 in / 26 mm as they may cause RoboVac to malfunction.
C. The “No-Go” zones that you set may be ineffective in some cases. It is strongly recommended to place boundary strips (sold separately) in front of fireplaces and certain areas (i.e. air vents) that may cause damage to RoboVac if entered.
D. Keep RoboVac away from wet areas during cleaning.
E. RoboVac may climb on top of objects less than 0.67 in / 17 mm in height. Remove these objects if possible.
F. Anti-drop sensors will prevent RoboVac from tumbling downstairs and steep drops in most cases. Sensors are less effective if dirty or used on carpeted / reflective / very dark-colored floors. It is recommended to place physical barriers to block off areas where RoboVac may fall.
For FAQs and more information, please visit:
http://supporteufylife.com
T2261 51005002930 vol
