Zkteco Bol1219-a Automatic Bollard Owner's Manual (+ PDF)

Contents hide

Product Name: Automatic Bollard

Model Number: BOL1219-A

Manufacturer: ZKTECO CO., LTD.

Before using the automatic bollard, ensure that the power supply is connected and the working voltage is within the specified range.
Make sure the area where the bollard will be installed is clear of any obstructions.
To raise the bollard, activate the hydraulic drive unit by pressing the designated control button or using the provided remote control.
The bollard will start to rise to the specified height. Wait for the raising process to complete.
Once the bollard is fully raised, it can be used to control vehicle access or secure an area.
To lower the bollard, press the designated control button or use the remote control to activate the hydraulic drive unit.
The bollard will start to lower back into the ground. Wait for the lowering process to complete.
Ensure that the bollard is fully lowered and secure before allowing any vehicles or pedestrians to pass through.
Regularly inspect and maintain the automatic bollard according to the manufacturer’s recommendations to ensure proper functionality and longevity.

BOL1219-A is a high-quality automatic bollard which used widely to protect security areas from vehicle intrusion. It is an ideal solution for entrance with high-security requirements. The raising time of BOL1219-A is 3 seconds. Even if the intrusion is from a high-tonnage vehicle at high speed, the bollard will stop the vehicle easily because it is so solid that the vehicle will break after impact instead.
There are also some extra safety precautions in the design of BOL1219-A.
The LED bar on the bollard can effectively avoid accidents caused by poor vision of drivers at night. In case of power failure, the bollard can be lowered manually. Equipped with PLC (Programmable Logic Controller), various control methods can be achieved easily, such as biometric readers, remote control, and push-button stations.
The bollard is commonly found in customs, ports, prisons, and military bases where traffic guidance is needed to protect people and property. This product provides ideal access control in the areas mentioned above and raises the level of security.

Drive unit	Hydraulic
Diameter	219mm(Customizable)
Weight	≥130KG
Raising height	600mm(Customizable)
Underground product dimensions	400mm400mm1100mm
Raising/lowering time	3s
Weight load	120t
Material	SUS304
Material thickness	6mm (Customizable)
Ingress Protection	IP68
Working voltage	AC110/220V
Working power	350W
Working temperature	-35°C -75°C