22701 ALLEGRA Pendant Light
Product Information:
The ALLEGRA Pendant Light is a stylish and contemporary lighting
solution that is perfect for any modern home. It is available in
three variants, which are Black (Item No. 22701), White (Item No.
22702), and Silver Chrome (Item No. 22703). The light requires a
maximum power of 60W and a voltage of 240V. It comes pre-wired to
the fitting with a Live Feed (Red or Brown), Earth (Yellow/Green),
and Neutral Feed (Black or Blue). However, it does not come with an
E27 Globe, which needs to be purchased separately. The lamp must be
installed by a professional electrician to ensure safety and to
avoid warranty void.
Product Usage:
- Before installation, ensure that the power supply is switched
off. - Consult a professional electrician to install the light.
- Insert the E27 Globe into the fitting.
- Connect the Live Feed (Red or Brown) to the Main Input.
- Connect the Earth (Yellow/Green) wire to the Main Input.
- Connect the Neutral Feed (Black or Blue) to the Main
Input. - Turn on the power supply.
- Do not touch the lamp when in use and keep it away from hot
steam and corrosive gas.
29-31 Richland St. Kingsgrove. Sydney NSW 2208 Australia Phone: 02 9554 9600 | Fax: 02 9554 9433
[email protected] | www.domuslighting.com.au
Installation Manual
ALLEGRA PDT
Date: May 18, 2022 12:17 PM
Variants
Item No.
Blk
Wht
Schr
22701
22702
22703
ALLEGRA-PDT
Thank you for purchasing your new ALLEGRA Pendant Light, Please take the time to read and understand the instruction sheet
below. Failure to do so may void warranty.
Specifications
Voltage: 240V
Power: 60W Max Requires: 1xE27 Globe (Not Included)
1.
2.
Main Input
Live Feed (Red or Brown)
Earth (Yelow/Green)
Neutral Feed (Black 0r Blue)
NL NL
Pre-wired to fitting Live (Brown) Earth (Yelow/Green) Neutral (Blue)
3.
4.
Note: -The lamp must be installed by professional electrician
-Ensure the power supply is switched off before fitting this product
-Do not touch the lamp when in use -Keep away from hot steam and corrosive gas
