Taylor Bookcase Wall Unit
Product Information: TAYLOR Assembly Instructions
The TAYLOR unit is a customizable storage and shelving system
that can be disassembled and reconfigured as desired. The unit
comes with a wood base, steel counterweight, adjustable leveling
feet, Allen bolts, wall-mounting bracket system, and drywall
anchors. The unit can be stacked up to a maximum height of 86
inches (including base and lid components). The unit should be
attached to the wall using the included wall-mounting bracket
system after installing the uppermost pieces.
Product Usage Instructions:
- Attach the base to the Taylor case piece that will be in the
first (lowest) position by placing the case piece on its side or
back and fastening the included Allen bolts through the base and
into the underside of the case piece. Install the counterweight
before moving on to step 2. - Stand the assembled piece upright and place it against the wall
in its intended final location. Use a level and the adjustable
leveling feet on the underside of the base to ensure the piece is
perfectly level front-to-back and side-to-side. If you are
assembling multiple pieces positioned next to one another to form a
wall unit, position and level all pieces at the same time to ensure
they are level with each other. - If your piece has drawers or a wine insert, remove those
components prior to adding additional pieces. To add additional
pieces, simply stack one on top of another to form a unit. Use the
included Allen bolts to fasten the pieces together from inside the
lower piece by inserting the bolts up through the top panel of the
lower piece and into the corresponding threaded inserts in the
bottom of the piece above. Use the included Allen wrench to tighten
the bolts completely. - Repeat steps 2-3 as needed to achieve your intended design.
However, pieces with drawers should never be positioned above 36
inches. Drop-down desk pieces should only be placed in the lowest
position. - After installing the uppermost pieces, the unit MUST be
attached to the wall using the included wall-mounting bracket
system, regardless of overall height. Place the bracket on the
top-most piece so that its holes align with the bolt holes in the
top of the piece. Multiple sets of holes are provided on the
bracket to accommodate differing baseboard and molding styles. Use
a studfinder to find two different attachment points that align
with the holes in the bracket, and secure the unit to these two
places using screws. Drywall anchors are included if you are unable
to fasten directly to a stud. If attaching to a wall surface other
than drywall, alternative hardware may be required; contact a
professional. - After the bracket is installed, place the finished wood top on
top of the unit. Use the included Allen bolts to fasten the lid
through the uppermost piece in the same way the cases below were
assembled. - Complete your assembly by re-installing any drawers, adjustable
shelves or insert components that you removed in previous
steps.
Note: Keep these instructions for future use.
TAYLOR
ASSEMBLY INSTRUCTIONS
Keep these instructions for future use
NOTE
Keep these instructions for future use. Units can be disassembled and reconfigured as desired.
Recommended Tools and Materials
· Screwdriver or power drill · Allen wrench (included) · Studfinder Note: We recommend assembling this product with two people.
800.486.6554 | roomandboard.com
9/12/22
1
Attach the base to the Taylor case piece that will be in the first (lowest) position. To do this, place the case piece on its side or back and fasten the included Allen bolts through the base and
into the underside of the case piece. The wood base requires the addition of the included steel
counterweight. Install the counterweight before moving on to step 2.
2X
2X
2X 4X
2
Stand the assembled piece upright and place against the wall in its intended final location. Next, use a level and the adjustable leveling feet on the underside of the base to ensure the
piece is perfectly level front-to-back and side-to-side. If you are assembling multiple pieces
positioned next to one another to form a wall unit, position and level all pieces at the same
time to ensure they are level with each other.
800.486.6554 | roomandboard.com
9/12/22
3
If your piece has drawers or a wine insert, remove those components prior to adding additional pieces. To add additional pieces, simply stack one on top of another to form a unit. Use the
included Allen bolts to fasten the pieces together from inside the lower piece by inserting the
bolts up through the top panel of the lower piece and into the corresponding threaded inserts in
the bottom of the piece above. Use the included Allen wrench to tighten the bolts completely.
4X
4 Repeat steps 2-3 as needed to achieve your intended design
CAUTION Pieces with drawers should never be positioned above 36 inches. Drop-down desk pieces should only be placed in the lowest position.
5
After installing the upper most pieces, the unit MUST be attached to the wall using the included wall-mounting bracket system, regardless of overall height. Place the bracket on the top-most
piece so that its holes align with the bolt holes in the top of the piece. Multiple sets of holes
are provided on the bracket to accommodate differing baseboard and molding styles. Use a
studfinder to find two different attachment points that align with the holes in the bracket, and
secure the unit to these two places using screws. Drywall anchors are included if you are unable
to fasten directly to a stud. If attaching to a wall surface other than drywall, alternative hardware
may be required; contact a professional.
800.486.6554 | roomandboard.com
9/12/22
6
After the bracket is installed, place the finished wood top on top of the unit. Use the included Allen bolts to fasten the lid through the upper most piece in the same way the cases below
were assembled. Your full unit should NEVER exceed 86″ in total height (including base and lid
components).
4X
7
Complete your assembly by re-installing any drawers,
adjustable shelves or
insert components that you
removed in previous steps.
800.486.6554 | roomandboard.com
9/12/22
Modern Furniture - Room & Board
