BM159073 Gray Wood 5 Shelf Corner Bookcase
Product Information
| Part | Description | Quantity |
|---|---|---|
| A | Side Panel | 1 PC |
| B | Bottom Panel | 1 PC |
| C | Cross Panel | 4 PCS |
| D | Top Panel | 1 PC |
| E | Back Panel | 1 PC |
Product Usage Instructions
Assembly Tips:
- Remove hardware from box and sort by size.
- Please check to see that all hardware and parts are present
prior to start of assembly. - Please follow attached instructions in the same sequence as
numbered to assure fast & easy assembly.
Warnings:
- Don’t attempt to repair or modify parts that are broken or
defective. Please contact the store immediately. - This product is for home use only and not intended for
commercial establishments.
Assembly Time:
40 minutes
Assembly Steps:
Step 1:
Apply glue on all wooden dowels to ensure integrity of the
structure.
Parts Used:
| Part | Quantity |
|---|---|
| A | 2 |
| C | 4 |
| E | 1 |
Step 2:
Apply glue on all wooden dowels to ensure integrity of the
structure.
Parts Used:
| Part | Quantity |
|---|---|
| C | 3 |
| E | 1 |
Step 3:
Apply glue on all wooden dowels to ensure integrity of the
structure.
Parts Used:
| Part | Quantity |
|---|---|
| A | 1 |
| C | 5 |
| E | 1 |
Step 4:
Apply glue on all wooden dowels to ensure integrity of the
structure.
Parts Used:
| Part | Quantity |
|---|---|
| D | 1 |
| E | 1 |
| A | 1 |
Step 5:
Complete assembly.
Parts Used:
| Part | Quantity |
|---|---|
| B | 1 |
Anti-Tipping Installment Instructions
Furniture Tipping Restraint Warning:
Injury may result from tipping furniture. This restraint may
protect against tipping furniture.
Do not allow children to climb on furniture. This restraint is
not a substitute for proper adult supervision.
Failure to detach this restraint before moving the furniture may
result in injury and damage.
Installation Steps:
- To attach the anti-tip strap, securely mount one end to the top
of the case piece with the 5/8 screw. - Position the case piece against the wall in the desired
location. - Pull the anti-tip strap taut and mark the position of where you
will secure the other end on the wall. - Drill a 1-1/4 hole in the spot you marked.
- Tap in plastic wall plug.
- Fasten anti-tip strap with wall screw provided. (Please install
the anti-tipping kit in the middle of the case piece if only have
one set of anti-tipping kit.)
Wall Diagram:
ASSEMBLY INSTRUCTIONS BM159073
PAGE 1 OF 7
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size. 2. Please check to see that all hardware and parts are present prior to start of assembly. 3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
WARNING!
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store immediately. 2. This product is for home use only and not intended for commercial establishments.
ASSEMBLY TIME 40 MINUTES
PARTS IDENTIFICATION
A
SIDE PANEL
1 PC
B
BOTTOM PANEL
1 PC
C
CROSS PANEL
4 PCS
D
TOP PANEL
1 PC
E
BACK PANEL
1 PC
Z
HARDWARE IDENTIFICATION
NO
DESCRIPTION
FIGURE
Q’TY NO
DESCRIPTION
1
GLUE 40g
1 PC 4
SCREW
Ø 4.5x42mm
FIGURE
Q’TY 8 PCS
2
WOODEN DOWEL
Ø 8x30mm
24 PCS 5
STICKER
Ø 20mm
4 PCS
3
BOLT
Ø 9.5x55mm
16 PCS
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
PAGE 2 OF 7
STEP 1
2 x 24
A
C x4 2
Apply glue on all wooden dowels to ensure integrity of the structure.
E
PAGE 3 OF 7
STEP 2
1
Apply glue on all wooden dowels to ensure integrity of the structure.
C C C C
3 x 8
5
3 5
STEP 3
1
Apply glue on all wooden dowels to ensure integrity of the structure.
A
4 x 8
5
C
E
C
C C
5 4
PAGE 4 OF 7
STEP 4
D E
A
1
Apply glue on all wooden dowels to ensure integrity of the structure.
STEP 5
COMPLETE
3 x 8
5 3
5
B
PAGE 5 OF 7
23.5″
11.5″
22.32″
22.32″
12.68″
22.32″
12.68″
22.32″ 10.91″
22.32″
12.68″ 12.68″
12.68″
70.75″
Note : Dimension tolerance ±5%
PAGE 6 OF 7
ANTI-TIPPING INSTALLMENT INSTRUCTIONS
FURNITURE TIPPING RESTRAINT WARNING
Injury may result from tipping furniture. This restraint may protect against tipping furniture.
Do not allow children to climb on furniture. This restraint is not a substitute for proper adult supervision.
Failure to detach this restraint before moving the furniture may result in injury and damage.
1. To attach the anti-tip strap, securely mount one end to the top of the case piece with the 5/8″ screw.
2. Position the case piece against the wall in the desired location. 3. Pull the anti-tip strap taut and mark the position of where you will secure the other end
on the wall. 4. Drill a 1-1/4″ hole in the spot you marked. 5. Tap in plastic wall plug. 6. Fasten anti-tip strap with wall screw provided. (Please install the anti-tiping kit in the middle of the case piece if only have one set of anti-tipping kit.)
WALL
PAGE 7 OF 7
