German Pool Gid-rs22t Free-standing Ceramic Cooktop User Manual (+ PDF)

Contents hide

1 GID-RS22T Free-Standing Ceramic Cooktop

GID-RS22T Free-Standing Ceramic Cooktop

Free-s2t-iann-1diFnrgeeCSetaranmdinicg CStoeoakmtoOpven

GPU-6SSL GIGDP-RNSB-262STSL-S

Online Warranty Registration
Please read these instructions and warranty information carefully before use and keep them handy for future reference.
USER MANUAL

Please register your warranty information now!
For Warranty Terms & Conditions, please refer to the last page of this user manual.
P.2

Contents

Safety Instructions

Product Structure

Operating Instructions

Cleaning & Maintenance

Error Code

Technical Specification

Warranty Terms & Conditions

P.3

Safety Instructions

1. Before use, please remove the plastic bag, poly foam, leaflet, etc.

to ensure that the body is clean, the bottom vent is not blocked,

and the power cord or plug is not damaged. If the furnace surface

is damaged, please contact our Customer Service & Repair Center

for replacement to avoid danger.

2. When using the product, it is necessary to use sockets with vari-

ous technical indicators meeting the standards.

3. Please use a pot of suitable size. The diameter of the pot shall not

exceed 225mm and the pot shall be placed at the center of the

furnace surface to avoid touching the silicon rubber ring.

4. Please make sure the furnace and bottom of pot are dry and

clean before heating. Do not heat an empty or dry pan. During

cooking, do not leave for a long time.

5. The product must be used in a place that children cannot touch.

6. The product shall be placed on the level bench, avoid being used

on the blanket, tablecloth or film to prevent the bottom vent from

being blocked.

7. The product will heat up quickly after opening. Please do not

touch or move the product during the working process of the

product and during ”

” flashing. The furnace surface is still

hot during heating and after shutdown. Please keep away from

combustibles such as paper, rags, curtains or cleaners to avoid

fire!

8. Do not heat paper, film, plastic and other inflammables on the fur-

nace surface to avoid fire!

P.4

Safety Instructions

9. Do not directly heat food on the furnace surface, especially the

food with much oil and grease is easy to cause fire when heated!

10. After shutdown, the fan is in normal operation when it is working

for heat dissipation. Please do not pull out the plug immediately.

Please do not touch or clean the furnace surface during the dis-

play screen flashing ”

” .

P.5

Product Structure
Body

touch!

n o t

d o

s a ple

k in g ,

WARNING: Hot Sur face! Do Not Touch!

WARNING: N o

dr y

burning.

The

sur face

remains

t ho

r f te a

o
o c

1. Ceramic Glass Panel 2. Control Panel

3. Power Cord 4. Silicon rubber ring

Control Panel

GID-RS22T-S

HEAT ZONE
3

INNER ZONE

TIMER

1. LED DISPLAY 2. HEAT ZONE 3. TIMER 4. INNER ZONE INDICATOR

ON/OFF
6

OUTER ZONE

POWER

5. ON/OFF 6. POWER 7. OUTER ZONE INDICATOR

P.6

Operating Instructions

Utensil Selection

1. There are not too many restrictions on the selection of pots and pans. All pots and

pans made of high temperature resistant materials can be used.

2. It is recommended to use smooth flat-bottomed pots and pans with size not more

than 225mm in diameter, and placed in the center of the furnace surface for

heating, to avoid touching the silicon rubber ring.

3. Before heating, please make sure that the bottom of the pot is dry and clean, and

there is no residue to avoid affecting the effectiveness of the product.

Quick Start Guide
BUTTON

FUNCTION

ON/OFF

Turns the product ON and OFF

HEAT ZONE

Select DOUBLE RING, INNER RING ONLY or OUTER RING ONLY Mode

POWER

Adjust POWER OUTPUT

TIMER

Set COUNTDOWN TIMER

Turns Product ON and OFF
After plugging in the power source, product will emit a “BEEP” sound, and Display Screen will show “—-“. Press , Display Screen will show “00”, and product will enter into STANDBY MODE.

or to enter into COOKING MODE

In STANDBY MODE, press

, product will enter into DEFAULT COOKING

MODE of DOUBLE RING /2200W, Display Screen will show “2200”.

P.7

Operating Instructions

Select HEAT ZONE
When product is in COOKING MODE, press to select among DOUBLE RING, INNER RING ONLY and OUTER RING ONLY modes.

HEAT ZONE

DEFAULT POWER OUTPUT

INDICATOR LIGHT DISPLAY

DOUBLE RING

2200W

Inner Zone Light On
Outer Zone

INNER RING ONLY

1100W

Inner Zone Light On

OUTER RING ONLY

1100W

Outer Zone Light On

P.8

Operating Instructions

Adjust POWER OUTPUT
When product is in COOKING MODE, press

to adjust desired POWER OUTPUT.

HEAT ZONE DOUBLE RING

DEFAULT POWER OUTPUT 300W-2200W

INDICATOR LIGHT DISPLAY
300W, 600W, 900W, 1200W, 1400W, 1600W, 1800W, 2000W, 2200W

INNER RING ONLY

100W-1100W

100W, 300W, 500W, 700W, 900W, 1100W

OUTER RING ONLY

100W-1100W

100W, 300W, 500W, 700W, 900W, 1100W

P.9

Operating Instructions

Set TIMER COUNTDOWN

When product is in COOKING MODE, press to set TIMER COUNTDOWN. Each

short-press of

will add 1 minute to Timer, each long-press of

will add 10

minutes to Timer. (Minimum timer countdown is 1 minute, maximum is 3 hours). 3

seconds after Timer is set, product will automatically start countdown, Timer and

Power Level will display in alternation. To cancel the Timer, press and hold for 3

seconds.

WARNING: · When product is in use, DO NOT allow children near
product to avoid danger! · When product is in use, DO NOT touch or move product to
avoid getting burnt! · DO NOT unplug the product immediately after use,
because the built-in fan system is still dissipating residual heat! · Even after product is turned off, the product is still hot to the touch. DO NOT touch the product for at least 1 hour, to allow product to cool down completely. DO NOT touch, move or clean the product until it has completely cooled down! · UNDER NO CIRCUMSTANCES should food be cooked directly on the cooktop surface. This product should be used with appropriate cookware at all times! · DO NOT place any flammable items on top or around the vicinity of the product, such as paper, film, plastic, cloth, curtain etc. to avoid fire hazard!

P.10

Cleaning & Maintenance
1. Before cleaning and maintenance, make sure product has been unplugged and the furnace surface has cooled to normal temperature!
2. Do not wash product directly with water or immerse product in water. 3. If there is cooking residue on the furnace surface, gently scrape off with a
ceramic hob scraper at a 45 degree angle, and then wipe clean with a soft wet cloth. It can also be wiped with neutral detergent. Do not use corrosive liquid or steel scrubber for cleaning to avoid damaging the surface of the ceramic glass panel.
P.11

Error Code

ERROR CODE

ANALYSIS

Voltage lower than 90V

Voltage higher than 280V

SOLUTION
Check power supply first; if problem remains, contact Customer Service and Repair Centre
Check power supply first; if problem remains, contact Customer Service and Repair Centre

Sensor detects temperature higher than 750°F

Contact Customer Service and Repair Centre

1. Temperature sensor is short circuited

or open circuited during operation

2. Heating plate is burnt out and product Contact Customer Service

cannot heat up

and Repair Centre

3. Fuse is cut

4. PCB power board malfunction

PCB power board overheated

Restart the product; if problem remains, contact Customer Service and Repair Centre

Sensor detects short circuit or open circuit

Contact Customer Service and Repair Centre

Fan malfunction

Contact Customer Service and Repair Centre

ATTENTION:
If problem remains unsolved, please contact Customer Service and Repair Centre. Disassembly and repair of this product must only be conducted by qualified professionals.

P.12

Technical Specification

Model Rated Voltage/Frequency Rated Power No. of hob Product Dimensions Net Weight Gross Weight Power Range

GID-RS22T-S
220V / 50Hz – 60Hz 2,200W 1 (H)80 ()280 mm Approx. 1.9kg Approx. 2.2kg 100W – 2,200W

· All information in this manual is for reference only. If there are any errors or omissions, the specifications produced by the factory shall prevail. Specification is subjected to change without prior notice.
· If there is any inconsistency or ambiguity between the English version and the Chinese version of this manual, the Chinese version shall prevail.
· Refer to www.germanpool.com for the most up-to-date version of the Operating Instructions.

P.13

P.14

1.
2. 3. 225mm
4.
5. 6.
7.
8. 9. 10.
P.15

touch!

n o t

d o

s a ple

k in g ,

WARNING: Hot Sur face! Do Not Touch!

WARNING: N o

dr y

burning.

The

sur face

ains rem

ot h

r f te a

o
o c

3 2
4

1. 2.

3. 4.

1
2 3 4

GID-RS22T-S

HEAT ZONE

INNER ZONE

TIMER

1. LED 2. 3. 4.

ON/OFF
6

OUTER ZONE

POWER

5. 6. 7.

P.16

1. 2. 225mm
3.

LED—- 00

LED

2200WLED

P.17

2200W

Inner Zone
Outer Zone

1100W

Inner Zone

1100W

Outer Zone

300W-2200W

100W-1100W

300W, 600W, 900W, 1200W, 1400W, 1600W, 1800W, 2000W, 2200W
100W, 300W, 500W, 700W, 900W, 1100W
100W, 300W, 500W, 700W, 900W, 1100W

P.18

10313

· · · ·
1 · ·

P.19

1. 2. 3. 45

P.20

90V

280V

750

P.21

GID-RS22T-S
220V / 50Hz – 60Hz 2,200W 1 (H)80 ()280 mm 1.9kg 2.2kg 100W – 2,200W

·
·
· www.germanpool.com

P.22

()

Warranty Terms & Conditions
Under normal operations, the product will gurantee a 1-year full warranty provided by German Pool (effective from the date of purchase).

*
1) VIP

* This warranty is not valid until customer registration information is received by our Service Centre within 10 days of purchase via one of the following means:
1) Visit our VIP App and register online: (Scan the QR Code on the left)

2) www.germanpool.com/warranty
3)

2) Visit our website and register online: www.germanpool.com/warranty
3) Complete the attached Warranty Card and mail it back to our Customer Service Centre.

Please fill out the form below. This information and the original purchase invoice will be required for any repairs. Warranty will be invalidated if information provided is found to be inaccurate.
Model No. : GID-RS22T-S

Serial No. : Purchased From :

Invoice No. : Purchase Date :

1.
2. – – () –
3. – – – –
4.
5.

1. Customer who fails to present original purchase invoice will not be eligible for free warranty service.
2. Customer should always follow the operating instructions. This warranty does not apply to: – labour costs for on-site installation, check-up, repair, replacement of parts and other transportation costs; – damages caused by accidents of any kind (including material transfer and others); – operating failures resulting from applying incorrect voltage, improper usage, and unauthorized installations or repairs.
3. This warranty is invalid if: – the purchase invoice is modified by an unauthorized party; – the product is used for any commercial or industrial purposes; – the product is repaired or modified by unauthorized personnel, or unauthorized parts are installed; – the serial number is modified, damaged or removed from the product.
4. German Pool will, at its discretion, repair or replace any defective part.
5. This warranty will be void if there is any transfer of ownership from the original purchaser.

Customer Service & Repair Centre

Hong Kong

Macau

() UnitB,G/F,SunshineKowloonBay

A, 1 Andar, Mei Kui Kuong Cheong Fase 2,

B +852 2333 6249 +852 2356 9798 [email protected]

5151A Cargo Centre, 59 Tai Yip Street, Kowloon No.515 Avenida Do Conselheiro Borja

+853 2875 2699 +853 2875 2661

Kowloon, Hong Kong Tel : +852 2333 6249 Fax : +852 2356 9798

Macau Tel : +853 2875 2699 Fax : +853 2875 2661

Email : [email protected]

This warranty is valid only in Hong Kong and Macau
P.23