SLENPET SH101 Electric Sprayer
PACKAGE
| Electric sprayer | l |
| Micro USB cable | l |
| Instruction manual | l |
PRODUCT FUNCTION DIAGRAM
PRODUCT FEATURE
| Product Name | Electric Sprayer |
| Model | SHlOl |
| Capacity | 2000ml |
| Battery capacity | 18650 lithium battery (2200 mAh) |
| Input voltage | 3.7V |
| Current | lA |
| Material | PE |
| Spray mode | Direct mode, Spray mode |
| Charging time | 3.Sh |
| Continuous working | 8 hours |
| Package dimension | 205*175*310mm |
INSTRUCTION FOR USE
- Rotate the handle of the electric sprayer counterclockwise to remove.
- Inject water.
- Press the power buttons to turn on and off. While using the display screen lights up and shows the remaining battery.
- You can switch between direct mode and spray mode by rotating the nozzle cover.
- The sprayer will automatically stops after continuously working for 7 minutes.
CHARGING METHOD
- Open the cover of the USB port, connect the provided Micro USB cable to the charging port of the electric sprayer, then connect to the charger which is plugged into an outlet.
- The display screen indicates the remaining power and blinks.
- Recommend charging every two months when not in use.
WARNING
- Do not disassemble the product.
- Confirm the input voltage, current, and product parameter of the charging device.
- Do not soak or expose the electric sprayer to water or other liquids.
- The product may heat, ignite, or explode if in or close to a fire. Don’t heat the sprayer or leave it in a high-temperature state.
- Do not use the electric sprayer while charging.
- Be careful no water gets inside from the USB connection part.
- Do not spray with high viscous or corrosive liquid.
- To avoid water flowing to the powerhead and affect the use, do not put the product upside down.
- This product is equipped with a precision pump and battery, do not use without water to avoid damage to the bottle body.
