Spitzer 202902 800 Lumens Dual Head Battery Powered Motion User Manual

202902 800 Lumens Dual Head Battery Powered Motion

Dual Head Motion Activated LED Security Light

The Dual Head Motion Activated LED Security Light is a
high-quality lighting fixture designed to provide enhanced security
for your property. With its motion detection feature and bright LED
lights, it ensures that any movement in the monitored area is
instantly illuminated, deterring potential intruders.

Product Specifications:

• Type: LED Security Light
• Wattage: DC 4.5V
• Voltage: 5000W
• CRI (Color Rendering Index): 80+
• IP Rating: IP44 (Waterproof)
• Lumens: 4000
• Motion Detection Angle: 8.33ft – 40ft

Product Usage Instructions:

1. Remove the fixture and mounting package from the box, ensuring
   that no parts are missing.
2. Refer to the installation instructions to correctly install the
   product. Keep these instructions in a location close to your light
   fixture for future reference.
3. CAUTION: Do not use this fixture with a dimming circuit. If you
   have dimmer controls, they need to be replaced with regular
   electrical switches. If you are unsure, it is recommended to hire a
   qualified electrician for the installation.
4. Battery Installation:
   1. Loosen the screw to open the back cover of the light.
   2. Insert the batteries according to the polarity markings inside
      the battery compartment.
   3. Close the back cover securely.
   4. Tighten the screw to ensure the back cover is properly
      sealed.
5. Mounting:
   1. Select a suitable location on a wall or eave for mounting.
   2. Fix the back cover to the surface using the provided
      screws.
   3. Use the waterproof rubber to cover the back cover and then
      attach the dual-head light to it.
   4. Tighten the screw to securely fasten the dual-head light.
6. Adjusting Settings:
   • To adjust the sensitivity of the motion detection, turn the
     SENSITIVITY knob clockwise for increased sensitivity.
   • The TIMER knob allows you to set the duration for which the
     light remains on after motion is detected (10 seconds, 3 minutes,
     or longer).
   • The AUTO OFF switch can be used to turn off the light
     completely.
7. Troubleshooting:
   • If the light does not switch on when there is movement, check
     if there are any obstructions blocking the motion sensor or adjust
     the sensitivity settings.
   • If the light switches on during the day, ensure that the light
     is not installed in an area with excessive ambient light sources,
     such as street lights.
   • If the light is not as bright as normal, check if the batteries
     need to be replaced or if there are any issues with the LED
     bulbs.

For further assistance or inquiries, contact our toll-free
number: 888-883-3266 or email us at
[email protected].

Dual Head Motion Activated LED Security Light
%)#8999
USE AND CARE GUIDE

Remove the xture and moun ng package from the box and make sure that no parts are missing b referencing the illustra on on the installa on instruc ons.

install the product. SAVE THESE INSTRUCTIONS IN A LOCATION CLOSE TO YOUR LIGHT FIXTURE SO YOU CAN REFER TO THEM AT A LATER TIME.
! WARNING The product is not a toy and contains small parts, close supervision is necessary when this unit is used near children. The remote control contains a button cell battery. If swallowed, it could cause severe injury or death in just 2 hours, seek medical attention immediately. Do not mix old and new batteries. Do not mix alkaline, standard (carbon zinc) or rechargeable batteries. Do not dispose of batteries in fire. Batteries may explode or leak. Remove exhausted batteries from the product. Please dispose of batteries properly.
CAUTION
DO NOT USE THIS FIXTURE WITH A DIMMING CIRCUIT. If you currently have dimmer controls, you will need to remove them and replace them with regular electrical switches. If you have a three-way dimmer, you will have to replace it with a regular three-way switch. If you are unfamiliar with electrical installations, it is recommended you have a qualified electrician do your installation.

A

B

C

X2

X2

X2

Waterproof rubber

Screw

Battery Installation

1

2

3

4

2020
Page 1 of 4 www.evereadyledlighting.com

Loosen the screw

Open the back cover

Mounting (wall or eave)

5

6

7

A C

Fix the back cover to the surface with 2 screws (C)
Toll-Free Number: 888-883-3266

Use the waterproof rubber (A) to cover the back cover, then fix the dual-head light to the back cover

Tighten the screw to complete

[email protected]

Page 2 of 4

r
AUTO OFF

SENSITIVITY

increases

TIMER 10S
TEST 3MIN

counterclockwise)

approximately 10

approximately

In the test mode,the light will come on

5 seconds when moon is sensed regardless of whether it is day or night.

SPECIFICA I NS

T pe Wa age Voltage

LED

W DC 4.5V 5000

CRI IP Ra ng Lumens 80+ IP 44 00

ouble

Problem not switch on when there is movement

1. 2.
3. 4.
such as street lights.

Light switches on during the day.

1.

2. 3.

EVEREADY

Light is not as bright as normal.

MOTION DETECTION ANGLE
180°

8.33ft 0 10ft

26.67ft 40ft

Page 3 of 4 www.evereadyledlighting.com

Toll-Free Number: 888-883-3266

[email protected]

Page 4 of 4