I-box Slick 79271pi Alarm Clock With Wireless Charging Instruction Manual

Alarm Clock with Wireless Charging

Box contents

Controls & Features

Controls & Features

1. Time, Dimmer, Snooze
2. -Button, 1 Alarm 1 set
3.  LED Display
4. +Button, 2 Alarm set
5. Wireless charging zone
6. USB C power port
7. Back up battery compartment

LED Indicators

8) PM (12 hour clock)
9) Wireless charging indicator
10) 1 Alarm 1 on
11) 2 Alarm 1 on
12) Zz Snooze

Power connection

Fitting a backup battery

The Slick has a backup battery feature where 1x CR2025 battery (not supplied) will allow it to remember time and alarm settings if unplugged or power is cut. Please Note: The battery will not power the clock or wireless charging function it will only save settings.

Clock setting
12H/24H

HourMinuteAlarm setting
Alarm 1 – Minute
Alarm 1 enable-disable

Alarm 2 – Hour

Alarm 2- MinuteAlarm 1 enable-disable
Alarm StopAlarm Snooze

LED Display Dimmer

Specifications

Wireless charging

If you have a phone with Qi wireless charging capability you can use your Slick to charge it. Place your smart phone centrally on the phone panel (5). As shown below.The wireless charging LED (9) in the bottom left of the LCD panel is lit while your phone is charging and the battery charge status can be seen on your phone’s display.
Please Note: The wireless charging LED (9) will flash if your phone is not correctly positioned. You may need to remove your smartphone from its case if the thickness of the case exceeds 5mm or if it contains metal.

Caring for your Alarm Clock
Important Safety Information

Important – Please read these instructions fully before installing or operating your alarm clock.
Keep away from flame sources such as lighted candles.
Do not expose to dripping or splashed fluids. Objects filled with liquids, such as vases, must not be placed close to the speaker.
The unit should not be exposed to direct sunlight, very high or low temperature, moisture, vibrations, strong magnetic fields, high frequencies and dusty environments.
Do not place the product in enclosed bookcases or racks without proper ventilation. Ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths, curtains, etc.
Never attempt to insert wires, pins or other such objects into the vents or openings of the unit.
Do not disassemble or modify the alarm clock, there are no user serviceable parts.
If the alarm clock is damaged in anyway or malfunctions do not use. Consult a qualified service engineer.
Do not use abrasives, benzene, thinner or other solvents to clean the surface of the unit. To clean, wipe with clean soft cloth and a mild detergent solution.
This product uses batteries and both the product and batteries must be disposed of properly. Do not throw them in the household waste at the end of their life cycle; take them to a collection center for the recycling of electrical, electronic equipment and batteries. Contact your local council for recycling advice.

Troubleshooting

Disclaimer
Updates to Firmware and/or hardware components are made regularly. Therefore some of the instructions, specifications and pictures in this documentation may differ slightly from your particular situation. All items described in this guide are for illustration purposes only and may not apply to your particular situation. No legal right or entitlements may be obtained from the description made in this manual.

Declaration of conformity
Hereby, Philex Electronic Ltd. declares that the wireless charging equipment: Slick Alarm Clock is in compliance with the Radio Equipment Directive 2014/53/ EU. The full text of the EU declaration of conformity is available at the following internet address: www.philex.com/doc

Technical support
For further help, advice, information or live chat visit www.iboxstyle.com