RL15032 Gable Table Lamp

Product Information – Gable Table Lamp Item # RL 15032

This Gable Table Lamp is a stylish and functional lighting
fixture that will enhance your living space. It comes with all the
necessary parts for installation and is designed to be used with a
light bulb (not included). Please read the following instructions
carefully before assembling and using the lamp.

Assembly Instructions

1. Carefully remove all parts from the box. Place on a clean, soft
   surface.
2. Install the harp (C) to the saddle (E) and adjust it to the
   desired height. Then, tighten the adjustment knobs (D).
3. Remove the finial (A) from the harp (C).
4. Remove the shade (B) from its packaging and attach it to the
   harp (C) using the finial (A). If the shade has additional
   packaging, carefully cut it off from the interior of the shade to
   avoid damages.
5. Install a light bulb into the socket.
6. Remove the protective cover (F) from the plug.
7. Plug the lamp into an electrical outlet and test the
   fixture.

Care Instructions

To keep your Gable Table Lamp clean and in good condition,
follow these care instructions:

• Clean the lamp only with a soft dry cloth or feather
  duster.
• Do not use abrasive or chemical agents to clean the lamp.

ASSEMBLY INSTRUCTIONS
A B
C Bulb not included
D E
F

Gable Table Lamp Item # RL 15032
NOTICE: This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect item and contents carefully. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved.
TOOLS REQUIRED (NOT INCLUDED): Scissors
1. Carefully remove all parts from the box. Place on a clean, soft surface. 2. Install harp (C) to saddle (E), adjust to desired height, then tighten
adjustment knobs (D). 3. Remove finial (A) from harp (C). 4. Remove shade (B) from packaging and attach to harp (C) using
finial (A). NOTE: If shade has additional packaging, carefully cut off from interior of shade to avoid damages. 5. Install light bulb into the socket. 6. Remove protective cover (F) from the plug. 7. Plug into electrical outlet and test fixture.
Care Instructions: Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.